Bresser Quadro-NG-Thermo-Hygro User manual

Weather Station ·
Quadro-NG-Thermo-Hygro
EN Instruction manual

DE
Besuchen Sie unsere Website über den folgenden QR Code oder Weblink um weitere
Informationen zu diesem Produkt oder die verfügbaren Übersetzungen dieser Anleitung zu
nden.
GB
Visit our website via the following QR Code or web link to nd further information on this
product or the available translations of these instructions.
FR
Si vous souhaitez obtenir plus d’informations concernant ce produit ou rechercher ce mode
d’emploi en d’autres langues, rendez-vous sur notre site Internet en utilisant le code QR ou le
lien correspondant.
NL
Bezoek onze internetpagina via de volgende QR-code of weblink, voor meer informatie over
dit product of de beschikbare vertalingen van deze gebruiksaanwijzing.
ES
¿Desearía recibir unas instrucciones de uso completas sobre este producto en un idioma
determinado? Entonces visite nuestra página web utilizando el siguiente enlace (código QR)
para ver las versioneAs disponibles.
IT
Desidera ricevere informazioni esaustive su questo prodotto in una lingua specica? Venga a
visitare il nostro sito Web al seguente link (codice QR Code) per conoscere le versioni disponibili.
www.bresser.de/P7000028
www.bresser.de/warranty_terms
GARANTIE · WARRANTY · GARANTÍA · GARANZIA
Le produit est recyclable, soumis à une responsabilité élargie du producteur
et fait l’objet d’une collecte sélective. Lors de l’élimination, il convient de
respecter les règles d’élimination complémentaires applicables en France :

3
Table of contents
1 Imprint ..................................................................................................... 5
2 Validity note ............................................................................................ 5
3 Features ................................................................................................... 6
4 About this Instruction Manual ............................................................. 6
5 General safety instructions................................................................... 6
6 Parts overview and scope of delivery .................................................. 9
7 Screen display ....................................................................................... 11
8 Before commissioning ......................................................................... 12
9 Setting up power supply...................................................................... 13
10 Receiving measurements automatically........................................... 14
11 Select channel ....................................................................................... 14
12 HI/LO Alert............................................................................................. 14
13 Clima indicator...................................................................................... 15
14 Trend arrow indicators ........................................................................ 16
15 Temperature display ............................................................................16
16 MAX/MIN weather data....................................................................... 16
17 Disposal.................................................................................................. 16
18 Technical data....................................................................................... 17
19 Warranty................................................................................................ 18

4
20 EC declaration of conformity ................................................................18
21 UKCA declaration of conformity ...........................................................18

5 / 20
1 Imprint
Bresser GmbH
Gutenbergstr. 2
46414 Rhede
Germany
www.bresser.de
For any warranty claims or service inquiries, please refer to
the information on "Warranty" and "Service" in this docu-
mentation. We ask for your understanding that unsolicited
returns cannot be processed.
Errors and technical changes excepted.
© 2023 Bresser GmbH
All rights reserved.
The reproduction of this documentation - even in extracts -
in any form (e.g. photocopy, print, etc.) as well as the use
and distribution by means of electronic systems (e.g. image
file, website, etc.) without the prior written permission of
the manufacturer is prohibited.
The designations and brand names of the respective com-
panies used in this documentation are generally protected
by trade, trademark and/or patent law in Germany, the
European Union and/or other countries.
2 Validity note
This documentation is valid for the products with the follow-
ing article numbers:
7000028
Manual version: v062023a
Manual designation:
Manual_7000028_Quadro-NG-Thermo-Hy-
gro_en_BRESSER_v062023a
Always provide information when requesting service.

6 / 20
3 Features
• Thermo-/hygrometer with 3 outdoor sensors
• 4 measurement results for temperature and relative
humidity
• Indoor climate indicator as smiley
• Min./max. memory for temperature and humidity
• Alarm function for maximum and minimum values
(High/Low)
• Can be placed on a tabletop or mounted to the wall
• Dimensions: 102x24x139 mm
• Batteries: 2x AA (station), 6x AAA (sensors)
4 About this Instruction Manual
NOTICE
These operating instructions are to be considered a
component of the device.
Read the safety instructions and the instruction manual
carefully before using this device.
Keep these instruction manual in a safe place for future ref-
erence. If the device is sold or passed on, the instruction
manual must be passed on to any subsequent owner/user
of the product.
5 General safety instructions
DANGER
Danger of suffocation!
Improper use of this product may result in suffocation, es-
pecially for children. It is therefore imperative that you ob-
serve the following safety information.

7 / 20
• Keep packaging materials (plastic bags, rubber bands,
etc.) away from children! There is a danger of choking!
• This product contains small parts that can be swal-
lowed by children! Choking hazard!
DANGER
Risk of an electric shock!
This device contains electronic parts that are powered by a
power source (AC adapter and/or batteries). Improper use
of this product may result in electric shock. Electric shock
can cause serious or fatal injuries. It is therefore imperative
that you observe the following safety information.
• Never leave children unattended when handling the
device! Follow the instructions carefully and do not at-
tempt to power this device with anything other than
power sources recommended in this instruction
manual, otherwise there is a danger of an electric
shock!
DANGER
Explosion hazard!
Improper use of this product may result in fire. It is essen-
tial that you observe the following safety information in or-
der to avoid fires.
• Do not expose the device to high temperatures. Use
only the recommended batteries. Do not short-circuit
the device or batteries, or throw them into a fire! Ex-
cessive heat or improper handling could trigger a
short-circuit, a fire or an explosion!

8 / 20
NOTICE
Danger of material damage!
Improper handling may result in damage to the unit and/or
accessories. Therefore, use the device only in accordance
with the following safety information.
• Do not disassemble the device! In the event of a defect,
please contact your dealer. They will contact the Service
Center and can arrange the return of this device for re-
pair if necessary.
• Do not immerse the unit in water!
• Do not expose the device to impacts, vibrations, dust,
constant high temperatures or excessive humidity. This
can result in malfunctions, short-circuits or damage to
the batteries and components.
• Use only the recommended batteries. Always replace
weak or empty batteries with a new, complete set of
batteries at full capacity. Do not use batteries from dif-
ferent brands or types or with different capacities. Re-
move batteries from the device if it is not to be used for
a longer period of time!
NOTICE
Risk of voltage damage!
The manufacturer is not liable for damage related to im-
properly installed batteries!

9 / 20
6 Parts overview and scope of delivery
SIZE AA 1.5V
SIZE AA 1.5V
COM
DRY
COM
COM
12
10
13
15
14
B
9
11
A
234
5
6
7
1
8
Illustration1: All parts of base station (top) and wireless sensor (bottom)
1 Display (base station) 2 MEM button (display MIN and
MAX values or delete saved val-
ues) / DOWN button (downward
value change)

10 / 20
3 ALERT button (temperature
alarm)
4 Channel button (sensor channel
selection) / UP button (value
change upwards)
5 Wall mount fixture 6 Battery compartment
7 Battery compartment cover 8 Stand
9 Display (wireless sensor) 10 Function indicator light
11 Wall mount fixture 12 Battery compartment cover
(wireless sensor)
13 Slide control for channel selection 14 RESET knob (reset all settings)
15 Battery compartment (wireless
sensor)
Scope of delivery
Base device (A), 3x wireless sensor (B)
Also required (not included):
Station: 2 pcs Mignon batteries (1.5V, type AA)
Sensors: 6 pcs. Micro batteries (1.5V, type AAA) (2 pieces per
sensor)

11 / 20
7 Screen display
MAX
MIN
!
HI AL
LO AL
!
LO AL
!
HI AL
LO AL
COM
DRY
COM
COM
3
2
1
7
4
5
8910
13
12
11
6
Illustration2: Screen display
1 Channel 1 display area 2 Indicator for currently selected
channel
3 Channel 2 display area 4 Channel 3 display area
5 Indoor display area 6 Symbol for highest (MAX) or low-
est (MIN) value

12 / 20
7 Symbol for the RCC signal 8 Temperature
9 Trend arrow 10 Humidity
11 Alarm symbol for high (HI AL) or
low (LO AL) temperature
12 Alarm symbol for high (HI AL) or
low (LO AL) humidity
13 Climate indicator (optimum, dry,
humid)
8 Before commissioning
NOTICE
Avoid connection faults!
In order to avoid connection problems between the devices,
the following points must be observed during commission-
ing.
1. Place the base unit (receiver) and sensor (transmitter)
as close together as possible.
2. Connect the power supply to the base unit and wait un-
til the indoor temperature is displayed.
3. Establish power supply for the sensor.
4. Set up/operate the base unit and sensor within the ef-
fective transmission range.
5. Make sure that the base unit and the radio sensor are
set to the same channel.
When changing the batteries, always remove the batteries
from both the base unit and the sensor and reinsert them in
the correct order so that the radio link can be re-estab-
lished. If one of the two devices is operated via a mains
power connection, the power connection must also be
briefly disconnected for this device when the batteries are
changed. If, for example, only the batteries in the sensor
are replaced, the signal may subsequently not be received
at all or not be received correctly.

13 / 20
Note that the actual range depends on the respective con-
struction materials used for the buildings as well as the re-
spective position of the base unit and the outdoor sensor.
External influences (various radio transmitters and other
sources of interference) can greatly reduce the possible
range. In such cases, we recommend finding other locations
for both the base unit and the outdoor sensor. Sometimes
moving the sensor by just a few centimeters is enough!
9 Setting up power supply
Base unit
1. Remove the battery compartment cover.
2. Insert the batteries into the battery compartment.
Make sure that the battery terminals are correctly
aligned (+/-).
3. Replace the battery compartment cover.
4. Wait until indoor temperature is displayed on the base
unit.
Wireless sensor
5. Remove the battery compartment cover.
6. Move the channel slider to the desired channel.
NOTICE!This Thermo-Hygrometer can be operated
with up to 3 wireless sensors. Each connected wireless
sensor must be operated on a different channel. If only
one wireless sensor is connected, it should be operated
on channel 1.
7. Insert the batteries into the battery compartment.
Make sure that the battery terminals are correctly
aligned (+/-).
8. Replace the battery compartment cover.

14 / 20
10 Receiving measurements automatically
Once batteries are installed, the base station will display the
measurement readings. Readings from the remote sensor
will be displayed within 3 minutes after powering it on.
11 Select channel
In normal display mode, press the CH/UP button on the
base station several times to select the desired channel.
Sequence: Channel 1 > Channel 2 > Channel 3 > Inside.
With the channel selected, press the CH/UP button for ap-
prox. 3 seconds to reset the values and to initiate reception
again.
12 HI/LO Alert
To set alert
1. Press the CH/UP button to select the desired channel.
2. In normal display mode, press the ALERT button for
about 4 seconds to enter the temperature alarm set-
tings mode.
3. Press the CH/UP or MEM/DOWN button to change the
value.
Activate/deactivate the alarm
To activate or deactivate the alarm, press and hold the
ALERT button for about 4 seconds while the value is still
flashing. The alarm symbol appears on the screen.
4. Press the ALERT button to confirm and switch to the
next setting.
5. Sequence of settings: Temperature high > Temperature
low > Humidity high > Humidity low.
6. Finally, press the ALERT button to save the settings and
return to normal mode.
Display set alarm values

15 / 20
In normal display mode, press the ALERT button several
times to display the currently set high/low alarm values. Se-
quence: High values (HI AL) > Low values (LO AL) > Normal
mode
Disable when an alarm is active
Press the Alert button to stop the alarm sound. HI AL or LO
AL continues to flash on the screen.
13 Clima indicator
123
1 COMFORT: Optimal (Temperature
between 20-28°C and humidity
between 40% and 70%)
2 DRY: Humidity >65%
3 WET: Humidity <45%
The clima indicator is a pictorial indication based on air tem-
perature and humidity in an attempt to determine comfort
level.
Note:
• Comfort indication can vary under the same temperat-
ure, depending on the humidity.
• There is no comfort indication when temperature is be-
low 0° C (32° F) or over 60° C (140° F)

16 / 20
14 Trend arrow indicators
123
1 Rising 2 Steady
3 Falling
The temperature and humidity trend indicator shows the
trends of changes in the forthcoming few minutes. Arrows
indicate a rising, steady or falling trend.
15 Temperature display
In normal display mode, press the MEM/DOWN key for 3
seconds to toggle between °C and °F.
16 MAX/MIN weather data
The maximum and minimum readings for indoor and out-
door temperature as well as for the humidity are stored by
the base station over a period of 24 hours:
1. Press the [DOWN] key several times to display the
stored values one after the other.
2. Display sequence: Maximum values (MAX) > Minimum
values (MIN) > Current values
3. When the maximum or minimum values are displayed,
press the DOWN key for approx. 2 seconds to irrevoc-
ably delete all stored values.
17 Disposal
Dispose of the packaging materials according to its type. In-
formation on proper disposal can be obtained from the muni-
cipal waste disposal service provider or environmental agency.

17 / 20
Do not dispose of electronic devices in the household
garbage!
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its transposition into
national law, used electrical equipment must be collected sep-
arately and recycled in an environmentally sound manner.
Batteries and rechargeable batteries must not be disposed of
with household waste. You are legally obliged to return used
batteries and accumulators and can return them after use
either at our sales outlet or in the immediate vicinity (e.g. in the
trade or in municipal collection points) free of charge.
Batteries and accumulators are marked with a crossed-out
dustbin and the chemical symbol of the pollutant, "Cd" stands
for cadmium, "Hg" stands for mercury and "Pb" stands for lead.
18 Technical data
Base station
Batteries: 2x AA batteries
Temperature measurement unit: °C or °F selectable
Temperature measurement range: -9.9°C to +50°C
Humidity measurement range: rH 20% to 95%
Wireless sensor
Batteries: 2x AAA batteries
Temperature measurement unit: °C or °F selectable
Temperature measurement range: -40°C to +70°C
Transmission frequency: 433Mhz
Maximum transmission power: below 10mW
Transmission range: up to 80 m (in interference-free terrain)

18 / 20
19 Warranty
The regular warranty period is 2 years and starts on the day
of purchase. To benefit from an extended voluntary war-
ranty period as indicated on the gift box, registration on our
website is required.
You can consult the full guarantee terms as well as informa-
tion on extending the guarantee period and details of our
services at www.bresser.de/warranty_terms.
20 EC declaration of conformity
Bresser GmbH hereby declares that the radio equipment
type with item number 7000028 is in compliance with Direct-
ive 2014/53/EU. The full text of the EC Declaration of Con-
formity is available at the following web address:
www.bresser.de/download/7000028/CE/7000028_CE.pdf
21 UKCA declaration of conformity
A "Declaration of Conformity" in accordance with the applic-
able directives and relevant standards has been issued by
Bresser GmbH The full text of the UKCA Declaration of Con-
formity is available at the following web address:
www.bresser.de/download/7000028/
UKCA/7000028_UKCA.pdf
Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way,
Edenbridge, Kent TN8 6HF, Great Britain

DE AT CH BE
Bei Fragen zum Produkt und eventuellen
Reklamationen nehmen Sie bitte zunächst mit
dem Service-Center Kontakt auf, vorzugsweise
per E-Mail.
E-Mail: [e-mail]
Telefon*: [phone]
BRESSER GmbH
Kundenservice
Gutenbergstr. 2
46414 Rhede
Deutschland
*Lokale Rufnummer in Deutschland (Die Höhe der Gebühren je
Telefonat ist abhängig vom Tarif Ihres Telefonanbieters); Anrufe aus
dem Ausland sind mit höheren Kosten verbunden.
GB IE
Please contact the service centre rst for any
questions regarding the product or claims,
preferably by e-mail.
E-Mail: [email protected]
Telephone*: [phone]
BRESSER UK Ltd.
Suite 3G, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
Great Britain
*Number charged at local rates in the UK (the amount you will
be charged per phone call will depend on the tari of your phone
provider); calls from abroad will involve higher costs.
FR BE
Si vous avez des questions concernant ce produit
ou en cas de réclamations, veuillez prendre
contact avec notre centre de services (de
préférence via e-mail).
E-Mail: [e-mail]
Téléphone*: 00 800 6343 7000
BRESSER France SARL
Pôle d’Activités de Nicopolis
314 Avenue des Chênes Verts
83170 Brignoles
France
*Prix d'un appel local depuis la France ou Belgique
NL BE
Als u met betrekking tot het product vragen
of eventuele klachten heeft kunt u contact
opnemen met het service centrum (bij voorkeur
per e-mail).
E-Mail: [email protected]
Telefoon*: [phone]
BRESSER Benelux
Smirnostraat 8
7903 AX Hoogeveen
The Netherlands
*Het telefoonnummer wordt in het Nederland tegen lokaal tarief
in rekening gebracht. Het bedrag dat u per gesprek in rekening
gebracht zal worden, is afhankelijk van het tarief van uw telefoon
provider; gesprekken vanuit het buitenland zullen hogere kosten met
zich meebrengen.
ES PT
Si desea formular alguna pregunta sobre el
producto o alguna eventual reclamación, le
rogamos que se ponga en contacto con el centro
de servicio técnico (de preferencia por e-mail).
E-Mail: [email protected]
Teléfono*: [phone]
BRESSER Iberia SLU
c/Valdemorillo,1 Nave B
P.I. Ventorro del Cano
28925 Alcorcón Madrid
España
*Número local de España (el importe de cada llamada telefónica
dependen de las tarifas de los distribuidores); Las llamadas des del
extranjero están ligadas a costes suplementarios..
Service

Bresser GmbH
Gutenbergstraße 2
46414 Rhede · Germany
www.bresser.de
@BresserEurope