Bresser 4Cast PC User manual

1
PC
Instruction Manual
Digital Forecast Weather Station
with wireless outdoor-transmitter,
rain sensor, anemometer and
PC-software

2
CONTENT
S
ECTION 1 SETTING UP METEOTIME WEATHER STATION
1.0 Must Read before Getting Started.
1.1 Introduction
1.2 Getting Start
1.3 Operation Instruction
1.4 Weather Status
1.5 Cities
1.6 Critical Weather Message in Short Form
1.7 Setup Manual in Short Form
S
ECTION 2 SETTING UP WIRELESS INDOOR/OUTDOOR MEASURING DEVICE FOR
WIND, RAIN, THERMOHYGROMETER AND THE ATOMSPHERE PRESSURE
2.0 Introduction
2.1 Features of Wireless In/Outdoor Measuring Devices
2.2 Installing your Weather Station
2.2.1 Setting up the Thermo-hygro sensors
2.2.2 Setting up the Rain Sensor
2.2.3 Setting up the Anemometer (wind sensor)
2.2.4 Setting Up the Main Unit
2.3 Buttons and Controls
2.4 Navigating between Different Modes
2.4.1 Pressure Mode
2.4.2 Temperature and Humidity Mode
2.4.3 Rain Mode
2.4.4 Wind Mode
2.5 Setting Pressure parameters during initial start-up
2.6 Indoor and Outdoor Temperature and Humidity
2.7 Wireless Outdoor Rain Guage
2.8 Wireless outdoor Anemometer (Wind Sensor)
3 LED Backlight Options
4 Linking the Weather Station to a Computer
5 Maintenance
6 Technical Specification
Your Professional Meteotime Weather Station consists of:
• 4-Day Weather information, and
• Wireless Indoor/Outdoor measuring device for Wind, Rain, Thermo-hygrometer and the
atmosphere pressure.
This package comes with
• Main Display Unit (Main Console)
• Wireless Wind-meter
• Wireless Rain-Guage
• Wireless Thermohygrometer
Key Features:
• Weather Status for today and coming three days for 470 cities
• Rain/Snow/Hail Probability for Today
• Wind Speed and Wind Direction for Today
• Five channel outdoor 433Mhz wireless Thermo-hygrometer
• Indoor Thermo-hygrometer
• Wireless Outdoor Wind speed and direction
• Wireless outdoor Rain Guage
• Sunrise and sunset display
• Moon phase
• History Record of wireless outdoor Temperature, Humidity, and atmosphere pressure
• Regional Day-time temperature and Night-time Temperature information.
Night-time temperature for the 4th day will not be displayed.
• Critical Weather Alert
• Radio-controlled Clock and Calendar
• Time-zone setting
• Blue Backlight
Section 1 will depict on setting up to display the 4-Day Weather information that broadcasted
via the stations for radio-controlled clocks HBG (located in Switzerland) and DCF (located in
Germany)
Section 2 will depict on setting up to display the measuring data from Wireless Indoor/Outdoor
device for Wind, Rain, Thermo-hygrometer and the atmosphere pressure.
Meade Instruments Europe GmbH
DE-46414 Rhede · Germany

3
CONTENT
S
ECTION 1 SETTING UP METEOTIME WEATHER STATION
1.0 Must Read before Getting Started.
1.1 Introduction
1.2 Getting Start
1.3 Operation Instruction
1.4 Weather Status
1.5 Cities
1.6 Critical Weather Message in Short Form
1.7 Setup Manual in Short Form
S
ECTION 2 SETTING UP WIRELESS INDOOR/OUTDOOR MEASURING DEVICE FOR
WIND, RAIN, THERMOHYGROMETER AND THE ATOMSPHERE PRESSURE
2.0 Introduction
2.1 Features of Wireless In/Outdoor Measuring Devices
2.2 Installing your Weather Station
2.2.1 Setting up the Thermo-hygro sensors
2.2.2 Setting up the Rain Sensor
2.2.3 Setting up the Anemometer (wind sensor)
2.2.4 Setting Up the Main Unit
2.3 Buttons and Controls
2.4 Navigating between Different Modes
2.4.1 Pressure Mode
2.4.2 Temperature and Humidity Mode
2.4.3 Rain Mode
2.4.4 Wind Mode
2.5 Setting Pressure parameters during initial start-up
2.6 Indoor and Outdoor Temperature and Humidity
2.7 Wireless Outdoor Rain Guage
2.8 Wireless outdoor Anemometer (Wind Sensor)
3 LED Backlight Options
4 Linking the Weather Station to a Computer
5 Maintenance
6 Technical Specification
Your Professional Meteotime Weather Station consists of:
• 4-Day Weather information, and
• Wireless Indoor/Outdoor measuring device for Wind, Rain, Thermo-hygrometer and the
atmosphere pressure.
This package comes with
• Main Display Unit (Main Console)
• Wireless Wind-meter
• Wireless Rain-Guage
• Wireless Thermohygrometer
Key Features:
• Weather Status for today and coming three days for 470 cities
• Rain/Snow/Hail Probability for Today
• Wind Speed and Wind Direction for Today
• Five channel outdoor 433Mhz wireless Thermo-hygrometer
• Indoor Thermo-hygrometer
• Wireless Outdoor Wind speed and direction
• Wireless outdoor Rain Guage
• Sunrise and sunset display
• Moon phase
• History Record of wireless outdoor Temperature, Humidity, and atmosphere pressure
• Regional Day-time temperature and Night-time Temperature information.
Night-time temperature for the 4th day will not be displayed.
• Critical Weather Alert
• Radio-controlled Clock and Calendar
• Time-zone setting
• Blue Backlight
Section 1 will depict on setting up to display the 4-Day Weather information that broadcasted
via the stations for radio-controlled clocks HBG (located in Switzerland) and DCF (located in
Germany)
Section 2 will depict on setting up to display the measuring data from Wireless Indoor/Outdoor
device for Wind, Rain, Thermo-hygrometer and the atmosphere pressure.
Meade Instruments Europe GmbH
DE-46414 Rhede · Germany

4
Section 1
Setting Up
Meteotime Weather Station
1.0 MUST READ BEFORE GETTING START
Your Meteotime Weather Station is different to traditional weather stations which measure the
prevailing conditions only, the data of this weather station is based on the METEOTIME which
is worked out on a daily basis by highly professional meteorologists using state-of-art
instruments.
The Meteotime Weather Station is engineered in such a way that it is able to receive the coded
METEOTIME signal containing the weather information. The information is broadcasted via
the stations for radio-controlled clocks HBG (located in Switzerland) and DCF (located in
Germany). For this reason, your Meteotime Weather Station is also a radio-controlled clock
with all the known advantages, such as always showing the exact time, and automatic change to
daylight saving time in winter and in summer.
You are able to receive weather forecasts for 60 meteorological regions within Europe for up to
4 days in advance, and offer 2-day-advance forecasts for an additional 30 regions.
WHAT DOES IT TAKE TO GET GOOD RECEPTION?
Similar to wireless signals like the mobile phone network or Radio/TV broadcasts, it is possible
that the Meteotime Weather Stations do not receive signals all the time and everywhere. The
following are some tips you should follow by all means to make sure that your device works
properly:
The location for Meteotime Weather Station is very important. For this reason we have
equipped all of them with an innovation test function (the TEST button) which enables you test
the quality of reception in your environment and to place the device where the best conditions
prevail.
Try your reception by testing your Meteotime Weather Station as stated in the manual. To do
this, in the room you want to install the device, please turn on all the potential sources of
interference (for example, a TV set). Then put the Meteotime Weather Station in the place and
direction you want it to be, but always at least in one meter from the potential source of
interference.
Watch the symbol GOOD RECEPTION or BAD RECEPTION on the display. Once you have
found the right location for GOOD RECEPTION, you may leave the Meteotime Weather
Station there, it will collect its data by radio controlled signal. Within a few minutes time and
the date will appear. However, the transfer of the very large amount of data (forecast for all
regions and days) will take much longer. To completely receive all data will take up to 24 hours
from the time of the initial setup

5
Section 1
Setting Up
Meteotime Weather Station
1.0 MUST READ BEFORE GETTING START
Your Meteotime Weather Station is different to traditional weather stations which measure the
prevailing conditions only, the data of this weather station is based on the METEOTIME which
is worked out on a daily basis by highly professional meteorologists using state-of-art
instruments.
The Meteotime Weather Station is engineered in such a way that it is able to receive the coded
METEOTIME signal containing the weather information. The information is broadcasted via
the stations for radio-controlled clocks HBG (located in Switzerland) and DCF (located in
Germany). For this reason, your Meteotime Weather Station is also a radio-controlled clock
with all the known advantages, such as always showing the exact time, and automatic change to
daylight saving time in winter and in summer.
You are able to receive weather forecasts for 60 meteorological regions within Europe for up to
4 days in advance, and offer 2-day-advance forecasts for an additional 30 regions.
WHAT DOES IT TAKE TO GET GOOD RECEPTION?
Similar to wireless signals like the mobile phone network or Radio/TV broadcasts, it is possible
that the Meteotime Weather Stations do not receive signals all the time and everywhere. The
following are some tips you should follow by all means to make sure that your device works
properly:
The location for Meteotime Weather Station is very important. For this reason we have
equipped all of them with an innovation test function (the TEST button) which enables you test
the quality of reception in your environment and to place the device where the best conditions
prevail.
Try your reception by testing your Meteotime Weather Station as stated in the manual. To do
this, in the room you want to install the device, please turn on all the potential sources of
interference (for example, a TV set). Then put the Meteotime Weather Station in the place and
direction you want it to be, but always at least in one meter from the potential source of
interference.
Watch the symbol GOOD RECEPTION or BAD RECEPTION on the display. Once you have
found the right location for GOOD RECEPTION, you may leave the Meteotime Weather
Station there, it will collect its data by radio controlled signal. Within a few minutes time and
the date will appear. However, the transfer of the very large amount of data (forecast for all
regions and days) will take much longer. To completely receive all data will take up to 24 hours
from the time of the initial setup

6
POTENTIAL SOURCES OF INTERFERENCE
With all Meteotime Weather Stations, we should take measures to provide best possible radio
reception. HBG and DCF are long wave stations with a broad reach (for example, approximate
1500km for the DCF station). However, as with a long wave radio station, interference may
occur which is often caused by the following influences:
• In buildings with lots of concrete, metal parts, and the electrical equipment you may get
reception problems (for example, in shopping centers and at exhibitions).
• Electronic equipment such as TVs, computers, household machines, etc., or transformers,
power lines, radio transmitters, and trains are potential sources of interference.
• Atmospheric influences might affect the radio waves.
• The distance from the station, and also the geographic conditions (mountains, etc.) also
affect the reception. Due to their great distance from the station, areas like Southern Italy or
Northern Scandinavia are critical.
• So-called (dead-spots) which make reception impossible can appear everywhere
• There is less interference in rural area than in heavily built-up urban ones.
• On principle at night the sources of interference are less active, consequently reception is
better than during the day.
• Week batteries in the device will lower the quality of reception.
DATA TRANSFER
METEOTIME sends the data during precisely defined time slots in accordance with UTC.
(UTC, i.e. for Central Europe during the winter UTC+1, during the summer UTC+2; for Great
Britain and Portugal during the winter UTC, during the summer UTC+1)
Transmission times (UTC) Forecast for
10:00 p.m. – 03:59 a.m. the actual (new) day (TODAY)
04:00 a.m. – 09:59 a.m. the next day (TOMORROW)
10:00 a.m. – 03:59 p.m. the following day (the day after TOMORROW)
04:00 p.m. – 06:59 p.m. the day following this (Two days after TOMORROW)
07:00 p.m. – 09:59 p.m. the 30 additional regions
In the even that the reception during the above time slots is completely or at times interfered
with or has broken down, these forecasts, or parts of them, will be missing.
1.1 INTRODUCTION
The Meteotime Weather Station LCD display shows:
• Today Weather Information Window
• Tomorrow, One-day-after, and Two-day-after Weather Information
• Information Window which shows Time & Date, Sunrise & Sunset, Cities, and Critical
Weather Information Description.
Today Weather Information including Wind
Speed, Wind Direction, and the probability of
Rain/Snow/Hail, Day & Night Temperature, Day
& Night Weather Status
Information Window. Tomorrow, One-day-after, and Two-Day-after
Weather Information including Day & Night
Temperature, Day & Night Weather Status

7
POTENTIAL SOURCES OF INTERFERENCE
With all Meteotime Weather Stations, we should take measures to provide best possible radio
reception. HBG and DCF are long wave stations with a broad reach (for example, approximate
1500km for the DCF station). However, as with a long wave radio station, interference may
occur which is often caused by the following influences:
• In buildings with lots of concrete, metal parts, and the electrical equipment you may get
reception problems (for example, in shopping centers and at exhibitions).
• Electronic equipment such as TVs, computers, household machines, etc., or transformers,
power lines, radio transmitters, and trains are potential sources of interference.
• Atmospheric influences might affect the radio waves.
• The distance from the station, and also the geographic conditions (mountains, etc.) also
affect the reception. Due to their great distance from the station, areas like Southern Italy or
Northern Scandinavia are critical.
• So-called (dead-spots) which make reception impossible can appear everywhere
• There is less interference in rural area than in heavily built-up urban ones.
• On principle at night the sources of interference are less active, consequently reception is
better than during the day.
• Week batteries in the device will lower the quality of reception.
DATA TRANSFER
METEOTIME sends the data during precisely defined time slots in accordance with UTC.
(UTC, i.e. for Central Europe during the winter UTC+1, during the summer UTC+2; for Great
Britain and Portugal during the winter UTC, during the summer UTC+1)
Transmission times (UTC) Forecast for
10:00 p.m. – 03:59 a.m. the actual (new) day (TODAY)
04:00 a.m. – 09:59 a.m. the next day (TOMORROW)
10:00 a.m. – 03:59 p.m. the following day (the day after TOMORROW)
04:00 p.m. – 06:59 p.m. the day following this (Two days after TOMORROW)
07:00 p.m. – 09:59 p.m. the 30 additional regions
In the even that the reception during the above time slots is completely or at times interfered
with or has broken down, these forecasts, or parts of them, will be missing.
1.1 INTRODUCTION
The Meteotime Weather Station LCD display shows:
• Today Weather Information Window
• Tomorrow, One-day-after, and Two-day-after Weather Information
• Information Window which shows Time & Date, Sunrise & Sunset, Cities, and Critical
Weather Information Description.
Today Weather Information including Wind
Speed, Wind Direction, and the probability of
Rain/Snow/Hail, Day & Night Temperature, Day
& Night Weather Status
Information Window. Tomorrow, One-day-after, and Two-Day-after
Weather Information including Day & Night
Temperature, Day & Night Weather Status

8
There are total 5 buttons at the Right side of main Unit for Setting up the Meteotime Weather
Section, namely:
SET
• Selected City Time + Date Sunrise + Sunset
• Each press of [SET] will display the selected City, Time + Date or Sunrise + Sunset
• Press and HOLD [SET] for 3 second to select your <1> Country, <2> Time Zone, <3>
Language, <4> Contrast of the LCD display
DAY / NIGHT
• Critical Whether Information Time + Date Day/Night Weather Status Change
• increasing the value during setting
• Chose one of the pre-selected cities
• decreasing the value during setting
• Chose one of the pre-selected cities
TEST √
• Find the place for the device which has a good reception
• Add the city into the list of your desired cities OR Remove the city out of the list of
desired Cities
• Edit your home town

9
There are total 5 buttons at the Right side of main Unit for Setting up the Meteotime Weather
Section, namely:
SET
• Selected City Time + Date Sunrise + Sunset
• Each press of [SET] will display the selected City, Time + Date or Sunrise + Sunset
• Press and HOLD [SET] for 3 second to select your <1> Country, <2> Time Zone, <3>
Language, <4> Contrast of the LCD display
DAY / NIGHT
• Critical Whether Information Time + Date Day/Night Weather Status Change
• increasing the value during setting
• Chose one of the pre-selected cities
• decreasing the value during setting
• Chose one of the pre-selected cities
TEST √
• Find the place for the device which has a good reception
• Add the city into the list of your desired cities OR Remove the city out of the list of
desired Cities
• Edit your home town

10
1.2 GETTING STARTED
• Insert the 4 batteries for remote units, and then insert batteries for the main unit.
• The main unit will automatically scan for the radio-controlled clock signal and the
Meteotime Weather signal. “ SUCHE SIG. “ (means Search Signal) will show in the
INFORMATION WINDOW.
The time and date signal will be received in a few minutes. Since there is a large amount of
Weather information for all regions and days, the unit needs about 24 hours from the time of
the initial setup to complete the reception of all data
• After the time and date signal is being received successfully, the display shows “SELECT
COUNTRY” and then “FRANKFURT” as default city in the information window.
To change the Country and the City please see the information below.
• If the unit is able to receive the Meteotime signal successfully, the Meteotime icon is
appeared in the second row of display. Otherwise, the Meteotime will be .
In the event the Meteotime icon change to , that means there are potential sources of
interference on the unit. The sources of interference may come from the electronics equipment
such as TV-set, computers, household machines etc. It may also be due to lots of concrete,
metal parts and electrical equipment in the building. It may also be due to your living area if it
is very far away from the Radio-controlled clock tower.
By the first time you power up this product, the language default setting is in German
Language. In order to change it into another language such as English, Spanish, French, Italian,
Dutch, or Swedish, please follow the setup as below.
When you put in the batteries for the first time, wait until the Main Unit receives
• “ SUCHE SIG. “ (meaning in English is SEARCH SIGNAL); it will display in the
INFORMATION WINDOW
• After several second, “ LAND EINST” (meaning in English is COUNTRY) is shown in the
INFORMATION WINDOW
• Press [ SET ] and “ ZONE +00 H “ is shown in the INFORMATION WINDOW
• Now press [ SET ] again and the “ LANGUAGE “ will be shown in the INFORMATION
WINDOW, then press [ ] or [ ] to select your desired language. There are total seven
languages to select, namely German, English, Spanish, French, Italian, Dutch, Swedish
• Press [ SET ] two times to exit the setup.
If you skip the above-mentioned step, the INFORMATION WINDOW will show the default
city FRANKFURT.M. You can change to your desired city in the following steps.
• Press and Hold [ SET ] for 3 second, is shown in the Information Window,
then press [ ] or [ ] key to select the country. For example, you have selected The
country name such as means Germany
• Press [ SET ] key to confirm the Country (let’s said we select Germany right now), and then
the information window will show .
• Then, press [ ] or [ ] key to go to your selected city, lets said ‘Frankfurt am Main’, and
the will show in the information window.
• At least press [ SET ] to confirm your selected city.
means it successfully receives today’s
weather information. Otherwise, it will be
means it is able to
receive the Meteotime
weather signal.
Otherwise, it will be
means it
successfully
receives weather
information of
two-day-after.
Otherwise, it will
be
means it
successfully
receives weather
information of
one-day-after.
Otherwise, it will
be
means it
successfully
receives tomorrow
weather information.
Otherwise, it will
be

11
1.2 GETTING STARTED
• Insert the 4 batteries for remote units, and then insert batteries for the main unit.
• The main unit will automatically scan for the radio-controlled clock signal and the
Meteotime Weather signal. “ SUCHE SIG. “ (means Search Signal) will show in the
INFORMATION WINDOW.
The time and date signal will be received in a few minutes. Since there is a large amount of
Weather information for all regions and days, the unit needs about 24 hours from the time of
the initial setup to complete the reception of all data
• After the time and date signal is being received successfully, the display shows “SELECT
COUNTRY” and then “FRANKFURT” as default city in the information window.
To change the Country and the City please see the information below.
• If the unit is able to receive the Meteotime signal successfully, the Meteotime icon is
appeared in the second row of display. Otherwise, the Meteotime will be .
In the event the Meteotime icon change to , that means there are potential sources of
interference on the unit. The sources of interference may come from the electronics equipment
such as TV-set, computers, household machines etc. It may also be due to lots of concrete,
metal parts and electrical equipment in the building. It may also be due to your living area if it
is very far away from the Radio-controlled clock tower.
By the first time you power up this product, the language default setting is in German
Language. In order to change it into another language such as English, Spanish, French, Italian,
Dutch, or Swedish, please follow the setup as below.
When you put in the batteries for the first time, wait until the Main Unit receives
• “ SUCHE SIG. “ (meaning in English is SEARCH SIGNAL); it will display in the
INFORMATION WINDOW
• After several second, “ LAND EINST” (meaning in English is COUNTRY) is shown in the
INFORMATION WINDOW
• Press [ SET ] and “ ZONE +00 H “ is shown in the INFORMATION WINDOW
• Now press [ SET ] again and the “ LANGUAGE “ will be shown in the INFORMATION
WINDOW, then press [ ] or [ ] to select your desired language. There are total seven
languages to select, namely German, English, Spanish, French, Italian, Dutch, Swedish
• Press [ SET ] two times to exit the setup.
If you skip the above-mentioned step, the INFORMATION WINDOW will show the default
city FRANKFURT.M. You can change to your desired city in the following steps.
• Press and Hold [ SET ] for 3 second, is shown in the Information Window,
then press [ ] or [ ] key to select the country. For example, you have selected The
country name such as means Germany
• Press [ SET ] key to confirm the Country (let’s said we select Germany right now), and then
the information window will show .
• Then, press [ ] or [ ] key to go to your selected city, lets said ‘Frankfurt am Main’, and
the will show in the information window.
• At least press [ SET ] to confirm your selected city.
means it successfully receives today’s
weather information. Otherwise, it will be
means it is able to
receive the Meteotime
weather signal.
Otherwise, it will be
means it
successfully
receives weather
information of
two-day-after.
Otherwise, it will
be
means it
successfully
receives weather
information of
one-day-after.
Otherwise, it will
be
means it
successfully
receives tomorrow
weather information.
Otherwise, it will
be

12
[ SET ] [ SET ]
[ / ] [ / ]
1.3 OPERATION INSTRUCTION
You are able to use the TEST function to look for a better location
• Press TEST button, “ SCAN “ is shown in the Information Window.
• Pick the unit to find a good location.
• flashing : The test is running and the Meteotime signal reception is good. You are able to
leave the device in this position.
flashing : The test is running and the Meteotime signal reception is poor. You need to
keep on looking for a better location.
• The test lasted for around 1 minute. You can restart the test with the [ TEST ] key at any
time, and also discontinue the test by press the TEST key.
SWITCH CITY <- -> SUNRISE & SUNSET TIME <- -> TIME & DATE
• After inserting the batteries, the weather station searches for the Radio controlled Time
signal as well as the MeteoTime signal. After it has successfully received the MeteoTime
signal, the display shows in the information window “Select Country”. After a few more
minutes, the information windows the default city “ ”.
• You are able to press [ SET ] to switch from the display of the City to Sunrise & Sunset time
OR Time & Date for Frankfurt am Main.
SELECT THE COUNTRY AND CITY / CITIES
• Press and Hold [ SET ] for 3 second , in the information window, is shown,
and then press [ ] or [ ] key to select the country. For example, you have selected the
country name such as means Germany will be shown in the information window.
• Press [ SET ] key to confirm the Country (let’s said we select Germany right now), and then
the information window will show .
• Then, press [ ] or [ ] key to select the city, and the city name will be shown in the
information window such as means the city ‘Frankfurt am Main’
• If the city ‘Frankfurt am Main’ is your selection, then press [ TEST
√
] key to confirm. A
√
will be shown on top of your selected city, and it will be and ‘Frankfurt
am Main’ will store into your personal memory list
• Then, you are able to press [ ] or [ ] key to select more cities,
and then press [ TEST √ ]
key to confirm. You are able to select maximum FIVE cities to display. If you want to add
more cities, then will show in the Information Window.
OR
press [ SET ] KEY to quit, and will shown at the information window.
REMARK: If you have skip the city selection in the first time you power up the unit, the product
will default select Frankfurt am Main as your selected city.
DISPLAY MORE CITIES INFORMATION
If you have selected more than one city, let said you have select Frankfurt am Main, Köln and
Münster in your desired city list, then you are able to press [ ] or [ ] key when the
Information Window shows the CITY NAME (Press SET until it displays the City Name).
When you selected the other city, the sunrise and sunset time, and weather information will be
of this selected city.
REMOVE YOUR SELECTED THE CITY / CITIES OUT OF MEMORY LIST
• Press and Hold [ SET ] for 3 second, is shown in the Information Window,
then press [ ] or [ ] key to select the country. For example, you have selected The
country name such as means Germany
• Press [ SET ] key to confirm the Country (let’s said we select Germany right now), and then
the information window will show .
• Then, press [ ] or [ ] key to go to your selected city, lets said ‘Frankfurt am Main’, and
the will show in the information window.
• Press [ TEST √ ] key to remove the √ , and this city is successful to remove out of your list
of preference cities you have selected.
• Then, you are able to press [ ] or [ ]
key to select more cities, and then press [ TEST √ ]
key to remove your selected cities.
OR
Press [ SET ] KEY to quit, and will shown at the information window. After 4
second, it will go to the City-Date-Time Mode.

13
[ SET ] [ SET ]
[ / ] [ / ]
1.3 OPERATION INSTRUCTION
You are able to use the TEST function to look for a better location
• Press TEST button, “ SCAN “ is shown in the Information Window.
• Pick the unit to find a good location.
• flashing : The test is running and the Meteotime signal reception is good. You are able to
leave the device in this position.
flashing : The test is running and the Meteotime signal reception is poor. You need to
keep on looking for a better location.
• The test lasted for around 1 minute. You can restart the test with the [ TEST ] key at any
time, and also discontinue the test by press the TEST key.
SWITCH CITY <- -> SUNRISE & SUNSET TIME <- -> TIME & DATE
• After inserting the batteries, the weather station searches for the Radio controlled Time
signal as well as the MeteoTime signal. After it has successfully received the MeteoTime
signal, the display shows in the information window “Select Country”. After a few more
minutes, the information windows the default city “ ”.
• You are able to press [ SET ] to switch from the display of the City to Sunrise & Sunset time
OR Time & Date for Frankfurt am Main.
SELECT THE COUNTRY AND CITY / CITIES
• Press and Hold [ SET ] for 3 second , in the information window, is shown,
and then press [ ] or [ ] key to select the country. For example, you have selected the
country name such as means Germany will be shown in the information window.
• Press [ SET ] key to confirm the Country (let’s said we select Germany right now), and then
the information window will show .
• Then, press [ ] or [ ] key to select the city, and the city name will be shown in the
information window such as means the city ‘Frankfurt am Main’
• If the city ‘Frankfurt am Main’ is your selection, then press [ TEST
√
] key to confirm. A
√
will be shown on top of your selected city, and it will be and ‘Frankfurt
am Main’ will store into your personal memory list
• Then, you are able to press [ ] or [ ] key to select more cities,
and then press [ TEST √ ]
key to confirm. You are able to select maximum FIVE cities to display. If you want to add
more cities, then will show in the Information Window.
OR
press [ SET ] KEY to quit, and will shown at the information window.
REMARK: If you have skip the city selection in the first time you power up the unit, the product
will default select Frankfurt am Main as your selected city.
DISPLAY MORE CITIES INFORMATION
If you have selected more than one city, let said you have select Frankfurt am Main, Köln and
Münster in your desired city list, then you are able to press [ ] or [ ] key when the
Information Window shows the CITY NAME (Press SET until it displays the City Name).
When you selected the other city, the sunrise and sunset time, and weather information will be
of this selected city.
REMOVE YOUR SELECTED THE CITY / CITIES OUT OF MEMORY LIST
• Press and Hold [ SET ] for 3 second, is shown in the Information Window,
then press [ ] or [ ] key to select the country. For example, you have selected The
country name such as means Germany
• Press [ SET ] key to confirm the Country (let’s said we select Germany right now), and then
the information window will show .
• Then, press [ ] or [ ] key to go to your selected city, lets said ‘Frankfurt am Main’, and
the will show in the information window.
• Press [ TEST √ ] key to remove the √ , and this city is successful to remove out of your list
of preference cities you have selected.
• Then, you are able to press [ ] or [ ]
key to select more cities, and then press [ TEST √ ]
key to remove your selected cities.
OR
Press [ SET ] KEY to quit, and will shown at the information window. After 4
second, it will go to the City-Date-Time Mode.

14
PERSONALIZE A PLACE NAME
• Press and Hold [ SET ] for 3 second. In the information window, is shown, and
then press [ ] or [ ] key to select the country. Let’s said you have selected the country
Germany which is represented in .
• Press [ SET ] key to confirm the Country (let’s said we select Germany right now), and then
the information window will show .
• Then, press [ ] or [ ] key to select the city, and the city name will be shown in the
information window such as means the city ‘Frankfurt am Main’, and
you would like to enter a new city which is near the region of Frankfurt am Main.
• Press the ‘MEM’ key ; a cursor flashes on the first position of the Information Window
Then following input commands then apply:
KEY Function
' ' or ' ' Selection of a letter
SET <1>Accept the selected letter and jumps to the next position.
OR
<2> If you have not entered any letter (in other words, if only the cursor is
flashing at the last position), confirm the entry with this key and your place
will also be included in the memory with immediate effect
TEST One position back in the data entry process
** The place that you have selected to enter your own description will still exist under its own
name.
• Press [ SET ] key to confirm and exit
SET THE TIME ZONE, LANGUAGE and CONTRAST
• Press and Hold [ SET ] for 3 second, is shown in the Information Window.
• Press [ SET ] again, then is shown in the Information Window, press
[ ] or [ ] key to adjust the time zone.
• Press [ SET ] again, then the LANGUAGE will be shown in the Information Window, press
[ ] or [ ] key to select your desired language. There are total Seven Language for
selection, namely German, English, Spanish, French, Italiano, Dutch, Swedish
• Press [ SET ] again, then is shown in the Information Window, press
[ ] or [ ] key to adjust the LCD contrast Level.
• Press [ SET ] again and will shown at the information window. After 4 second, it
will go to the City-Date-Time Mode
Remark: If you do not have any selection into the Setup mode up to 60 seconds, it will
automatically exit the setup mode. The Information Window will show City / Sunrise & Sunset
Time / Time & Date.
[ DAY / NIGHT ]
SWITCH DAY WEATHER INFORMATION <- -> NIGHT WEATHER INFORMATION
The device is able to base on the SUNRISE time and SUNSET time to automatically switch to
DAY- WEATHER and NIGHT-WEATHER respectively. The unit is preset to show
DAY- WEATHER after sunrise time, and NIGHT-WEATHER after SUNSET time. The user can
press the [ DAY / NIGHT ] button to see the DAY- Weather (for 10-second period) if currently
show the NIGHT-WEATHER, or vice verse.
CRITICAL WEATHER INFORMATION
Meteotime Weather signal contains the Critical Weather Information such as Gust, Frozen Rain,
Heavy Snow, Thunder, Strong UV, Dense Fog, Bise, Mistral, etc. for today and coming three
days. A critical weather alert signal will be turned on in case that day has critical weather
that the user must know.

15
PERSONALIZE A PLACE NAME
• Press and Hold [ SET ] for 3 second. In the information window, is shown, and
then press [ ] or [ ] key to select the country. Let’s said you have selected the country
Germany which is represented in .
• Press [ SET ] key to confirm the Country (let’s said we select Germany right now), and then
the information window will show .
• Then, press [ ] or [ ] key to select the city, and the city name will be shown in the
information window such as means the city ‘Frankfurt am Main’, and
you would like to enter a new city which is near the region of Frankfurt am Main.
• Press the ‘MEM’ key ; a cursor flashes on the first position of the Information Window
Then following input commands then apply:
KEY Function
' ' or ' ' Selection of a letter
SET <1>Accept the selected letter and jumps to the next position.
OR
<2> If you have not entered any letter (in other words, if only the cursor is
flashing at the last position), confirm the entry with this key and your place
will also be included in the memory with immediate effect
TEST One position back in the data entry process
** The place that you have selected to enter your own description will still exist under its own
name.
• Press [ SET ] key to confirm and exit
SET THE TIME ZONE, LANGUAGE and CONTRAST
• Press and Hold [ SET ] for 3 second, is shown in the Information Window.
• Press [ SET ] again, then is shown in the Information Window, press
[ ] or [ ] key to adjust the time zone.
• Press [ SET ] again, then the LANGUAGE will be shown in the Information Window, press
[ ] or [ ] key to select your desired language. There are total Seven Language for
selection, namely German, English, Spanish, French, Italiano, Dutch, Swedish
• Press [ SET ] again, then is shown in the Information Window, press
[ ] or [ ] key to adjust the LCD contrast Level.
• Press [ SET ] again and will shown at the information window. After 4 second, it
will go to the City-Date-Time Mode
Remark: If you do not have any selection into the Setup mode up to 60 seconds, it will
automatically exit the setup mode. The Information Window will show City / Sunrise & Sunset
Time / Time & Date.
[ DAY / NIGHT ]
SWITCH DAY WEATHER INFORMATION <- -> NIGHT WEATHER INFORMATION
The device is able to base on the SUNRISE time and SUNSET time to automatically switch to
DAY- WEATHER and NIGHT-WEATHER respectively. The unit is preset to show
DAY- WEATHER after sunrise time, and NIGHT-WEATHER after SUNSET time. The user can
press the [ DAY / NIGHT ] button to see the DAY- Weather (for 10-second period) if currently
show the NIGHT-WEATHER, or vice verse.
CRITICAL WEATHER INFORMATION
Meteotime Weather signal contains the Critical Weather Information such as Gust, Frozen Rain,
Heavy Snow, Thunder, Strong UV, Dense Fog, Bise, Mistral, etc. for today and coming three
days. A critical weather alert signal will be turned on in case that day has critical weather
that the user must know.

16
[ DAY / NIGHT ]
DAY NIGHT Weather status
[ DAY / NIGHT ]
[ DAY / NIGHT ]
flashing
Sometimes there are more than one critical weather information in the 4-days. Press
[ DAY / NIGHT ] key to read the critical weather information one by one. The special icon of
the day will be flashed when you read the Information.
• Press [ SET ] key to go back to the display of CITY <- -> SUNRISE & SUNSET TIME
<- -> TIME & DATE. If you would like to read the Weather Information in the information
window, then press [ DAY / NIGHT ] Key to display Day <- -> Night Weather information
and also the Critical Weather Information.
If no key is pressed, the critical weather information will be toggle to display, so as to make
sure you are aware of the critical weather details
Significance
Sunny (Clear
at night)
DayNight Significance
Heavy Rain
Light Cloudy Frontal
Storms
Mostly
Cloudy
Heat Storms
OvercastSleet Showers
Stratus
Clouds
Snow
Showers
FogSleet
ShowersSnow
Light Rain
DayNight
1.4 WEATHER STATUS

17
[ DAY / NIGHT ]
DAY NIGHT Weather status
[ DAY / NIGHT ]
[ DAY / NIGHT ]
flashing
Sometimes there are more than one critical weather information in the 4-days. Press
[ DAY / NIGHT ] key to read the critical weather information one by one. The special icon of
the day will be flashed when you read the Information.
• Press [ SET ] key to go back to the display of CITY <- -> SUNRISE & SUNSET TIME
<- -> TIME & DATE. If you would like to read the Weather Information in the information
window, then press [ DAY / NIGHT ] Key to display Day <- -> Night Weather information
and also the Critical Weather Information.
If no key is pressed, the critical weather information will be toggle to display, so as to make
sure you are aware of the critical weather details
Significance
Sunny (Clear
at night)
DayNight Significance
Heavy Rain
Light Cloudy Frontal
Storms
Mostly
Cloudy
Heat Storms
OvercastSleet Showers
Stratus
Clouds
Snow
Showers
FogSleet
ShowersSnow
Light Rain
DayNight
1.4 WEATHER STATUS

18
1.5 CITIES
There are a total of 470 cities information included in memory.
The cities of the name with * will only have 2-day weather status.
CITY FULL NAME
ANDORRA LAVELLA* AND.LA.VELL* ANDORRA 70
ST PÖLTEN ST.PÖLTEN AU/AUSTRIA 50
BISCHOFSHOFEN BISCHOFSHO AU/AUSTRIA 48
BREGENZ BREGENZ AU/AUSTRIA 48
EISENSTADT EISENSTADT AU/AUSTRIA 49
GRAZ GRAZ AU/AUSTRIA 46
INNSBRUCK INNSBRUCK AU/AUSTRIA 47
KITZBÜHEL KITZBÜHEL AU/AUSTRIA 48
KLAGENFURT KLAGENFURT AU/AUSTRIA 46
LANDECK LANDECK AU/AUSTRIA 47
LIENZ LIENZ AU/AUSTRIA 46
LINZ LINZ AU/AUSTRIA 26
SALZBURG SALZBURG AU/AUSTRIA 48
SCHLADMING SCHLADMING AU/AUSTRIA 48
VILLACH VILLACH AU/AUSTRIA 46
WELS WELS AU/AUSTRIA 26
WIEN WIEN AU/AUSTRIA 49
ZELTWEG ZELTWEG AU/AUSTRIA 46
ZWETTL ZWETTL AU/AUSTRIA 50
ANTWERPEN ANTWERPEN B/BELGIUM 6
BRUGGE BRUGGE B/BELGIUM 6
BRUSSEL BRUSSEL B/BELGIUM 6
CHARLEROI CHARLEROI B/BELGIUM 6
GENT GENT B/BELGIUM 6
LIEGE LIEGE B/BELGIUM 6
NAMUR NAMUR B/BELGIUM 6
VERVIERS VERVIERS B/BELGIUM 13
ST.GALLEN ST.GALLEN CH/SUISSE 35
AARAU AARAU CH/SUISSE 32
ADELBODEN ADELBODEN CH/SUISSE 33
ALTDORF ALTDORF CH/SUISSE 35
BASEL BASEL CH/SUISSE 45
BELLINZONA BELLINZONA CH/SUISSE 38
BERN BERN CH/SUISSE 32
BIENNE BIENNE CH/SUISSE 32
BRIG BRIG CH/SUISSE 34
CHUR CHUR CH/SUISSE 36
DAVOS DAVOS CH/SUISSE 36
DELEMONT DELEMONT CH/SUISSE 11
CITY NAME
at Information
Window COUNTRY NAME REGION
CITY FULL NAME
FRAUENFELD FRAUENFELD CH/SUISSE 32
FRIBOURG FRIBOURG CH/SUISSE 31
GENEVE GENEVE CH/SUISSE 31
GLARUS GLARUS CH/SUISSE 35
GRINDELWALD GRINDELWLD CH/SUISSE 33
INTERLAKEN INTERLAKEN CH/SUISSE 33
LA CHAUX-DE-FONDS LACHAUX-D.F CH/SUISSE 11
LAUSANNE LAUSANNE CH/SUISSE 31
LIESTAL LIESTAL CH/SUISSE 45
LOCARNO LOCARNO CH/SUISSE 38
LUGANO LUGANO CH/SUISSE 38
LUZERN LUZERN CH/SUISSE 32
MARTIGNY MARTIGNY CH/SUISSE 34
MONTREUX MONTREUX CH/SUISSE 31
NEUCHATEL NEUCHATEL CH/SUISSE 31
SAMEDAN* SAMEDAN* CH/SUISSE 86
SARNEN SARNEN CH/SUISSE 35
SCHAFFHAUSEN SCHAFFHAUS. CH/SUISSE 32
SCHWYZ SCHWYZ CH/SUISSE 35
SION SION CH/SUISSE 34
SOLOTHURN SOLOTHURN CH/SUISSE 32
STANS STANS CH/SUISSE 35
ZERMATT* ZERMATT* CH/SUISSE 88
ZUG ZUG CH/SUISSE 32
ZÜRICH ZÜRICH CH/SUISSE 32
BRNO BRNO CZ/CZ REP 50
BUDEJOVICE BUDEJOVICE CZ/CZ REP 50
CHEB CHEB CZ/CZ REP 50
DECIN DECIN CZ/CZ REP 51
HAVLICKAV BROD HAVL_BROD CZ/CZ REP 50
HRADEC/KRA HRADEC/KRA CZ/CZ REP 50
OLOMOUC OLOMOUC CZ/CZ REP 50
OSTRAVA OSTRAVA CZ/CZ REP 50
PLZEN PLZEN CZ/CZ REP 50
PRAHA PRAHA CZ/CZ REP 50
TEPLICE TEPLICE CZ/CZ REP 51
AACHEN AACHEN D / GER 14
AALEN AALEN D / GER 59
ANSBACH ANSBACH D / GER 28
AUGSBURG AUGSBURG D / GER 25
BAD_TÖLZ BAD_TÖLZ D / GER 48
BAYREUTH BAYREUTH D / GER 28
CITY NAME
at Information
Window COUNTRY NAME REGION

19
1.5 CITIES
There are a total of 470 cities information included in memory.
The cities of the name with * will only have 2-day weather status.
CITY FULL NAME
ANDORRA LAVELLA* AND.LA.VELL* ANDORRA 70
ST PÖLTEN ST.PÖLTEN AU/AUSTRIA 50
BISCHOFSHOFEN BISCHOFSHO AU/AUSTRIA 48
BREGENZ BREGENZ AU/AUSTRIA 48
EISENSTADT EISENSTADT AU/AUSTRIA 49
GRAZ GRAZ AU/AUSTRIA 46
INNSBRUCK INNSBRUCK AU/AUSTRIA 47
KITZBÜHEL KITZBÜHEL AU/AUSTRIA 48
KLAGENFURT KLAGENFURT AU/AUSTRIA 46
LANDECK LANDECK AU/AUSTRIA 47
LIENZ LIENZ AU/AUSTRIA 46
LINZ LINZ AU/AUSTRIA 26
SALZBURG SALZBURG AU/AUSTRIA 48
SCHLADMING SCHLADMING AU/AUSTRIA 48
VILLACH VILLACH AU/AUSTRIA 46
WELS WELS AU/AUSTRIA 26
WIEN WIEN AU/AUSTRIA 49
ZELTWEG ZELTWEG AU/AUSTRIA 46
ZWETTL ZWETTL AU/AUSTRIA 50
ANTWERPEN ANTWERPEN B/BELGIUM 6
BRUGGE BRUGGE B/BELGIUM 6
BRUSSEL BRUSSEL B/BELGIUM 6
CHARLEROI CHARLEROI B/BELGIUM 6
GENT GENT B/BELGIUM 6
LIEGE LIEGE B/BELGIUM 6
NAMUR NAMUR B/BELGIUM 6
VERVIERS VERVIERS B/BELGIUM 13
ST.GALLEN ST.GALLEN CH/SUISSE 35
AARAU AARAU CH/SUISSE 32
ADELBODEN ADELBODEN CH/SUISSE 33
ALTDORF ALTDORF CH/SUISSE 35
BASEL BASEL CH/SUISSE 45
BELLINZONA BELLINZONA CH/SUISSE 38
BERN BERN CH/SUISSE 32
BIENNE BIENNE CH/SUISSE 32
BRIG BRIG CH/SUISSE 34
CHUR CHUR CH/SUISSE 36
DAVOS DAVOS CH/SUISSE 36
DELEMONT DELEMONT CH/SUISSE 11
CITY NAME
at Information
Window COUNTRY NAME REGION
CITY FULL NAME
FRAUENFELD FRAUENFELD CH/SUISSE 32
FRIBOURG FRIBOURG CH/SUISSE 31
GENEVE GENEVE CH/SUISSE 31
GLARUS GLARUS CH/SUISSE 35
GRINDELWALD GRINDELWLD CH/SUISSE 33
INTERLAKEN INTERLAKEN CH/SUISSE 33
LA CHAUX-DE-FONDS LACHAUX-D.F CH/SUISSE 11
LAUSANNE LAUSANNE CH/SUISSE 31
LIESTAL LIESTAL CH/SUISSE 45
LOCARNO LOCARNO CH/SUISSE 38
LUGANO LUGANO CH/SUISSE 38
LUZERN LUZERN CH/SUISSE 32
MARTIGNY MARTIGNY CH/SUISSE 34
MONTREUX MONTREUX CH/SUISSE 31
NEUCHATEL NEUCHATEL CH/SUISSE 31
SAMEDAN* SAMEDAN* CH/SUISSE 86
SARNEN SARNEN CH/SUISSE 35
SCHAFFHAUSEN SCHAFFHAUS. CH/SUISSE 32
SCHWYZ SCHWYZ CH/SUISSE 35
SION SION CH/SUISSE 34
SOLOTHURN SOLOTHURN CH/SUISSE 32
STANS STANS CH/SUISSE 35
ZERMATT* ZERMATT* CH/SUISSE 88
ZUG ZUG CH/SUISSE 32
ZÜRICH ZÜRICH CH/SUISSE 32
BRNO BRNO CZ/CZ REP 50
BUDEJOVICE BUDEJOVICE CZ/CZ REP 50
CHEB CHEB CZ/CZ REP 50
DECIN DECIN CZ/CZ REP 51
HAVLICKAV BROD HAVL_BROD CZ/CZ REP 50
HRADEC/KRA HRADEC/KRA CZ/CZ REP 50
OLOMOUC OLOMOUC CZ/CZ REP 50
OSTRAVA OSTRAVA CZ/CZ REP 50
PLZEN PLZEN CZ/CZ REP 50
PRAHA PRAHA CZ/CZ REP 50
TEPLICE TEPLICE CZ/CZ REP 51
AACHEN AACHEN D / GER 14
AALEN AALEN D / GER 59
ANSBACH ANSBACH D / GER 28
AUGSBURG AUGSBURG D / GER 25
BAD_TÖLZ BAD_TÖLZ D / GER 48
BAYREUTH BAYREUTH D / GER 28
CITY NAME
at Information
Window COUNTRY NAME REGION

20
CITY FULL NAME
BERCHTESGADEN BERCHTESGA D / GER 48
BERLIN BERLIN D / GER 52
BIELEFELD BIELEFELD D / GER 14
BITBURG BITBURG D / GER 13
BORKUM BORKUM D / GER 19
BREMEN BREMEN D / GER 22
BREMERHAV EN BREMERHAVN D / GER 19
BURGHAUSEN BURGHAUSEN D / GER 26
COTTBUS COTTBUS D / GER 29
CUXHAVEN CUXHAVEN D / GER 19
DONAUESCHINGEN DONAUESCH. D / GER 57
DORTMUND DORTMUND D / GER 14
DRESDEN DRESDEN D / GER 29
DUISBURG DUISBURG D / GER 14
DÜSSELDORF DÜSSELDORF D / GER 14
EISENACH EISENACH D / GER 30
EMDEN EMDEN D / GER 19
ERFURT ERFURT D / GER 30
ESSEN ESSEN D / GER 14
FEHMARN FEHMARN D / GER 24
FLENSBURG FLENSBURG D / GER 24
FRANKFURT AM MAIN FRANKFURT.M D / GER 12
FRANKFURT a.d. ODER FRANKFURT.O D / GER 52
FREIBURG FREIBURG D / GER 45
FREUDENSTADT FREUDENST. D / GER 57
FRIEDRICHSHAFEN FRIEDRI.HFN D / GER 26
FULDA FULDA D / GER 37
GARMISCH_PATENK. GARMISCH_P D / GER 48
GIESSEN GIESSEN D / GER 37
GÖRLITZ GÖRLITZ D / GER 29
GOSLAR GOSLAR D / GER 22
GÖTTINGEN GÖTTINGEN D / GER 37
GREIFSWALD GREIFSWALD D / GER 24
HAGEN HAGEN D / GER 13
HALLE HALLE D / GER 29
HAMBURG HAMBURG D / GER 19
HANNOVER HANNOVER D / GER 22
HEILBRONN HEILBRONN D / GER 59
HILDESHEIM HILDESHEIM D / GER 22
HOF HOF D / GER 30
INGOLSTADT INGOLSTADT D / GER 25
JENA JENA D / GER 30
CITY NAME
at Information
Window
COUNTRY NAME REGION CITY FULL NAME
KAISERSLAUTERN KAISERSLAU D / GER 12
KARLSRUHE KARLSRUHE D / GER 12
KASSEL KASSEL D / GER 37
KEMPTEN KEMPTEN D / GER 26
KIEL KIEL D / GER 24
KOBLENZ KOBLENZ D / GER 13
KÖLN KÖLN D / GER 14
KONSTANZ KONSTANZ D / GER 32
LANDSHUT LANDSHUT D / GER 25
LEIPZIG LEIPZIG D / GER 29
LINDAU LINDAU D / GER 48
LINGEN LINGEN D / GER 14
LÖRRACH LÖRRACH D / GER 45
LÜBECK LÜBECK D / GER 24
LÜNEBURG LÜNEBURG D / GER 22
MAGDEBURG MAGDEBURG D / GER 22
MAINZ MAINZ D / GER 12
MANNHEIM MANNHEIM D / GER 12
MÜNCHEN MÜNCHEN D / GER 26
MÜNSTER MÜNSTER D / GER 14
NEUBRANDENBURG NEUBR.BURG D / GER 52
NÜRNBERG NÜRNBERG D / GER 28
OFFENBURG OFFENBURG D / GER 45
OLDENBURG OLDENBURG D / GER 22
OSNABRÜCK OSNABRÜCK D / GER 14
PASSAU PASSAU D / GER 25
PFORZHEIM PFORZHEIM D / GER 59
PLAUEN PLAUEN D / GER 30
POTSDAM POTSDAM D / GER 52
REGENSBURG REGENSBURG D / GER 25
ROSENHEIM ROSENHEIM D / GER 26
ROSTOCK ROSTOCK D / GER 24
RÜGEN RÜGEN D / GER 24
SAARBRÜCKEN SAARBRÜCKE D / GER 13
SIEGEN SIEGEN D / GER 13
SIGMARINGEN SIGMARINGE D / GER 26
SPIEKEROOG SPIEKEROOG D / GER 19
ST_PETER_ORDING ST_PETER_O D / GER 19
STUTTGART STUTTGART D / GER 59
SYLT SYLT D / GER 19
TRIER TRIER D / GER 13
TÜBINGEN TÜBINGEN D / GER 59
CITY NAME
at Information
Window
COUNTRY NAME REGION