Breville the Juice Fountain JE95 User manual

the Juice Fountain™
Instruction Book - JE95

6
A. Food pusher
For pushing whole fruit and vegetables
down the feed chute.
B. Unique Direct Central Feed System
Ensures maximum juice extraction.
C. Wide 75mm feed chute
Fits whole fruit and vegetables.
D. Large capacity pulp container
Dishwasher safe.
E. Stainless steel titanium reinforced
micro mesh filter basket
Dishwasher safe.
F. Heavy duty motor
With 5 year motor warranty.
G. Cord storage
Cord wraps around feet and clips into
position under base.
B
A
C
D
E
F
G
H. Interlocking safety arm
Stops juicer operating without cover
locked into place.
I. Juicer cover
(Not dishwasher safe).
J. Filter bowl surround
K. 1 litre juice jug and lid
With built in froth separator
(dishwasher safe).
L. 2 speed electronic control ON/OFF
switch
Accessories ( Not Shown)
Cleaning brush
Nylon bristle brush
Included for easy cleaning of micro mesh
filter basket
H
I
J
K
L
Components

7
BEFORE FIRST USE
Before using your Juice Fountain™ for
the first time, remove and safely discard
any packaging materials and promotional
stickers and labels.
Ensure the appliance is switched OFF at the
power outlet and the power cord is unplugged.
Wash the filter bowl surround, filter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with
a soft cloth. Rinse and dry thoroughly. The
motor base can be wiped with a damp cloth.
Dry thoroughly.
1. Place motor base on a flat, dry surface
such as a bench top. Ensure that the
motor base is switched OFF at the
control panel, then switch the appliance
off at the power outlet and unplug the
power cord.
2. Place filter bowl surround on top of the
motor base.
3. Align the arrows at the base of the
stainless steel filter basket with the
arrows on the motor drive coupling and
push down until it clicks into place.
Ensure the stainless steel filter basket
is fitted securely inside the filter bowl
surround and onto the motor base.
4. Place the juicer cover over the filter bowl
surround, positioning the feed chute
over the stainless steel filter basket and
lower into position.
Assembly

8
5. Raise the safety locking arm up and
locate into the two grooves on either
side of the juice cover.
The safety locking arm should now be in a
vertical position and locked into place on
top of the juice cover.
6. Slide the food pusher down the food
chute by aligning the groove in the food
pusher, with the small protrusion on the
inside of the top of the feed tube.
FOOD
PUSHER
GROOVE
SMALL
PROTRUSION
INSIDE FEED
TUBE
Continue to slide the food pusher down on
the feed chute.
7. Place the pulp container into position by
tilting the motor base slightly to the right.
Insert the pulp container under the juicer
cover on the left hand side ensuring it is
supported by the juicer cover and motor
base.
NOTE
To minimise cleaning, line the pulp
container with a plastic freezer bag to
collect the pulp. Pulp can be used in other
dishes, or as a compost for the garden or
discarded.
8. Place the juicer jug under the juice
spout on the right hand side of the Juice
Fountain™. The juice jug lid can be used
to avoid any splatter.

9
1. Wash your selection of fruit and
vegetables to be juiced.
NOTE
Most fruit and vegetables such as apples,
carrots and cucumbers will not need to
be cut or trimmed to size as these will
fit whole into the feed chute. Ensure
vegetables such as beetroots, carrots etc.
have all soil removed, are well washed
and trimmed of leaves before using.
2. Ensure the Juice Fountain™ is correctly
assembled. Refer to Assembling your
Breville product. Ensure the juicer jug
is placed under the juice spout and
pulp container is in position before
commencing juicing.
3. Plug the power cord into a 230/240V
power outlet. Turn the power ON at
the power outlet. Adjust the speed to
the desired setting. Push the two speed
switch either up for low speed or down for
high speed depending on the type of fruit
or vegetable being juiced. Use the speed
selector as a guide for juicing different
fruits and vegetables.
SPEED SELECTOR TABLE
Apples High
Apricots (stone removed) Low
Beetroot (trimmed) High
Blueberries Low
SPEED SELECTOR TABLE
Broccoli Low
Brussels sprouts (trimmed) High
Cabbage Low
Carrots High
Cauliflower Low
Celery High
Cucumber (peeled) Low
Cucumber, soft skinned High
Fennel High
Grapes (seedless) Low
Kiwi Fruit (peeled) Low
Mangoes (peeled, stone
removed) Low
Melons (peeled) Low
Nectarines (stone removed) Low
Oranges (peeled) High or Low
Peaches (stone removed) Low
Pears (stalks removed) High for hard
or Low for soft
Pineapple (peeled) High
Plums (stone removed) Low
Raspberries Low
Tomatoes Low
Watermelon (peeled) Low
Functions

10
4. With the motor running, place food into
the feed chute and use the food pusher
to gently guide food down. To extract the
maximum amount of juice, always push
the food pusher down slowly.
5. As fruit and vegetables are processed,
juice will flow into the juice jug and the
separated pulp will accumulate in the
pulp container.
NOTES
The pulp container can be emptied
during juicing by turning the Juice
Fountain™ OFF at the control panel
and then carefully removing the pulp
container. Replace empty pulp container
before continuing to juice.
Do not allow the pulp container to overfill
as this may affect the operation of the
appliance.
NOTE
To minimise cleaning, line the pulp
container with a plastic freezer bag to
collect the pulp. Pulp can then be used for
other dishes, or as compost for gardens
or discard.
NOTE
To include the froth with your juice,
simply remove the lid of the juice jug
when pouring juice into the glass.
NOTE
The juicer is fitted with a safety device
which safeguards against overheating
with excessive loads. If overheating
occurs, the juicer will automatically
activate the overload protection device
and the unit will switch itself off. When
the overload protection is activated,
unplug the Juicer from the power outlet
for at least 15 minutes to allow the unit
to cool. Then plug juicer into the power
outlet and use
as normal.
WARNING
Never use fingers to push food down the feed
chute or to clear the feed chute. Always use the
food pusher provided.

11
1. Ensure the Juice Fountain™ is turned
off by pushing the speed switch up or
down to the OFF position. Then switch
the appliance off at the power outlet and
unplug the power cord.
2. Remove the pulp container by tilting
the motor base slightly to the right and
unlatch it from under the juicer cover.
3. Place both hands on either side of the
safety locking arm and pull back and lift
over the grooves on either side of the
juicing cover.
Lower the safety locking arm down out
of position.
4. Lift the juicer cover of the Juice
Fountain™.
5. To remove the filter bowl surround with
the stainless steel filter basket, still in
place, hold base of the juicer and turn
filter bowl surround by the juice spout.
6. Lift off the filter bowl surround with the
stainless steel filter basket still in place.
DISASSEMBLY

12
7. To remove the stainless steel filter
basket from the filter bowl surround,
insert fingers under the grooves marked
LIFT BASKET and lift filter basket up.
For easy cleaning, it is recommended to
remove filter basket over the sink.
FILTER BASKET
CAUTION:
SHARP BLADES
WARNING
The stainless steel filter basket contains small
sharp blades to cut and process fruit and
vegetables. Avoid touching the blades when
handling the filter basket.

13
Ensure the Juice Fountain™is turned off by
switching the ON/OFF button on the control
panel to OFF. Then switch the appliance off at
the power outlet and unplug the power cord.
Ensure the Juice Fountain™ is correctly
disassembled. Refer to disassembling your
Breville product .
FOR EASY CLEANING:
• Clean as you go and avoid dried on juice
or pulp residue.
• Immediately after each use, rinse
removable parts in hot water to remove
wet pulp. Allow parts to air dry.
NOTE
To minimise cleaning, line the pulp
container with a plastic freezer bag to
collect the pulp. Pulp can then be used
for other dishes, or as compost for the
garden or discarded.
CLEANING THE MOTOR BASE
• Wipe the motor base with a soft, damp
cloth then dry thoroughly.
• Wipe any excess food particles from the
power cord.
NOTE
Do not use abrasive scouring pads or cleaners
when cleaning the parts or motor base as
they may scratch the surface.
CLEANING THE FILTER BOWL
SURROUND, JUICER COVER, FOOD
PUSHER, PULP CONTAINER
• Wash all parts in warm soapy water with
a soft cloth. Rinse and dry thoroughly.
NOTES
The filter bowl surround, juicing jug and
lid and pulp container, are dishwasher
safe (top shelf only).
The juice cover and food pusher are not
dishwasher safe.
CLEANING THE FILTER BASKET
• For consistent juicing results always
ensure that the stainless steel filter
basket is thoroughly cleaned using the
supplied cleaning brush.
• Soak the stainless steel filter basket
in hot soapy water for approximately
10 minutes immediately after juicing
is completed. If pulp is left to dry on
the filter it may clog the fine pores of
the filter mesh thereby lessening the
effectiveness of the juicer.
• Using the cleaning brush, hold the filter
basket under running water and brush
from the inside of the basket to the outer
rim. Avoid touching the small sharp
blades in the centre of the filter basket.
After cleaning the filter basket, hold it
up towards a light to ensure the fine
mesh holes are not blocked. If the holes
are blocked, soak the filter basket in hot
water with 10% lemon juice to loosen the
blocked holes. Alternatively, wash the
filter basket in the dishwasher.
Care & Cleaning

14
Do not soak the stainless steel filter basket
in bleach or other abrasive cleansers.
Always treat the filter basket with care as it
can be easily damaged.
NOTE
The stainless steel filter basket is
dishwasher safe (top shelf only).
CLEANING THE JUICE JUG
• Rinse the juice jug and lid with froth
attachment under running water.
• Wash both parts in warm soapy water
with a soft cloth. Rinse and
dry thoroughly.
NOTE
The juice jug and lid are dishwasher
safe(top shelf only).
REMOVING STUBBORN OR STRONG
FOOD STAINS AND ODOURS
Discolouration of the plastic may occur with
strongly coloured fruit and vegetables. To
help prevent this, wash parts immediately
after use. If discolouration does occur, the
plastic parts can be soaked in water with
10% lemon juice or they can be cleaned with
a non abrasive cleaner.
The Breville Juice Fountain™ is constructed
with a heavy duty motor. So heavy duty, we
have given the motor a 5-year guarantee
against faulty materials or manufacture.
This warranty is an extension of the
12-month replacement guarantee and covers
the motor only. The warranty does not
cover damage caused by accident, misuse,
or being used in a manner not stated in the
instruction book.
The 5-year guarantee is additional to the
conditions and warranties mandatory
implied by the laws and regulations of the
individual States and Territories of Australia
and the Trade Practices Act, 1974.
12 MONTH REPLACEMENT
GUARANTEE
The Breville Juice Fountain™ is totally
covered for the first 12-months against faulty
material or manufacture by the Breville
12-month replacement guarantee. (See
Guarantee Card enclosed).
WARNING
Do not immerse the motor base in water or
any other liquid. The centre of the filter basket
and feed chute contains small sharp blades to
process fruit and vegetables during the juicing
function. Do not touch blades when handling
the filter basket or feed chute.