Bristan ARM WORD01 C User manual

Round/Square
Wall Outlet
Fitting Instructions
Please keep these instructions for future reference.
(FI ARM WORD_SQ01 C) (REV D1)
GUARANTEE
All products are manufactured to the highest standards and a 5 year guarantee
covers any defect in manufacture.
In the interests of continuous product development we reserve the right to alter
specification as necessary
Bristan Group Limited
Birch Coppice Business Park
Dordon
Tamworth
Staffordshire
B78 1SG
UK
A Masco Company
Website: www.bristan.com
Telephone: [phone]
Facsimile: 0844 701 6275
Email:
All products must have access for servicing or replacement during the life of
the product.
THIS BOOKLET COVERS PRODUCT CODES:
ARM WORD01 C
ARM WOSQ01 C
TELEPHONE HELPLINE: 0844 701 6273
[email protected]
Bristan recommend E-Cloth for cleaning all of our
bathroom & kitchen products. Using just water, E-cloth
gives a smear free, deep clean by breaking up and holding
dirt, which normal cloths leave behind. Order through
your Bristan stockist. (ORDER CODE: ECLOTH)

This wall outlet is intended to be used in conjunction with other products, such as a
shower arm and valve. INSTALLATION DIAGRAM
COMPONENTS
INSTALLATION
1. Wall Outlet
2. Shroud
3. Threaded Nipple
3. Fix outlet to wall and secure in place with the backnut (not
supplied), connect the pipework in wall using appropriate
adapter and sealant (not supplied).
NOTE:- Before finishing wall turn on water supplies to check
both correct systems function and for leaking from
joints/connections.
The wall outlet should be arranged to accept a supply of flow
controllable mixed water.
1. Identify all components and check for completeness before
arranging fitting. Ensure that all plumbing is complete to the
required position for the wall outlet.
2. Place the shroud (2) over the threaded nipple (3) and onto the wall
outlet body (1) prior to fixing it to the wall.
AFTERCARE INSTRUCTIONS
Your fitting has a high quality finish and should be treated with care to preserve the
visible surfaces.
All surface finishes will wear if not cleaned correctly, the only safe way to clean your
mixer is to wipe with a soft damp cloth. Stains can be removed using washing up
liquid. All bath cleaning powders and liquids will damage the surface of your fitting,
even the non-scratch cleaners.
NOTE: Never use abrasive detergents or disinfectants or those containing
alcohol, hydrochloric acid or phosphoric acid.
*Design of wall outlet (1) may vary.
Before starting any installation project please consider:
Prior to drilling into walls, check there are no hidden electrical
wires, cables or water supply pipes with the aid of an electronic
detector. If you use power tools do not forget:
- Wear eye protection
- Unplug equipment after use
SAFETY
NOTE