Bristan W BASIN08 C Wiring diagram

Round Push Basin Waste Chrome
Installation Instructions & User Guide
IMPORTANT: Please keep these instructions for future reference and request of replacementparts

Contents Page
1. Introduction 01
2. Safety Note 01
3. Specification 01
4. Installations
Clicker waste (slotted) 02
Clicker waste (unslotted) 03
5. Cleaning &Maintenance
6. Notes
04
7. Bristan Guarantee
04
05

1. Introduction
Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have designed this
product with your enjoyment in mind. To ensure that it works to its full potential, it needs to be
fitted correctly. These fitting instructions have been created to give you all of the information you
need and, if you need any further help, please do not hesitate to give us a call on 0330 026 6273.
2. Safety Note
Please read these instruction thoroughly and retain for future use. All products manufactured and
supplied by Bristan are safe provided they are installed correctly, used correctly add receive
regular maintenance in accordance with these instructions.
01
3. Specification
Designed to comply with BS EN 274-1:2002 Waste fittings for sanitary appliances.

02
Parts contents list
1. Waste body
2. Rubber washer
3. Shaped rubber washer
4.Backnut
Installation – W BASIN08 C(slotted)
1. Identify all components are present prior to installation
2. Fit the waste body (1) and rubber washer (2) into the basin
3. Place shaped rubber washer (3) under the basin and secure waste by
tightening the back nut (4) as shown in the diagram below.
4. In order to fill the basin, the button in the middle of the waste needs to be
pressed down. To release the water, press the button again.
5. Check all joints and connections for leaks.
6. See page 4 for aftercare instructions

03
Parts contents list
1. Waste Body
2. Rubber Washer
3. Backnut
Installation Continued –W BASIN09 C (unslotted)
1. Identify all components are present prior to installation
2. Fit the waste body (1) and rubber washer (2) into the basin.
3. Secure waste by tightening back nut (3) as shown in the diagram below.
4. In order to fill the basin, the button in the middle of the waste needs to be
pressed down. To release the water, press the button again.
5. Check all joints and connections for leaks.
6. See page 4for aftercare instructions
IMPORTANT
Due to the design of this waste and the type of basins it is suitable for, e.g. and
overflow less glass basin, it is imperative that any water fittings are turned off
before the basin is allowed to overfill

04
5. Cleaning &Maintenance
Your fitting has a high quality finish and should be treated with care to preserve the visible
surfaces.
All finishes will wear if not cleaned correctly. The only safe way to clean your product is to wipe
with a soft damp cloth. Stains can be removed using washing up liquid. All bathroom cleaning
product (powders and liquids) will damage the surface of your fitting, even the non-scratch
cleaners.
NOTE:-Never use abrasive detergents or disinfectants or those containing alcohol, hydrochloric or
phosphoric acid.

05
Notes:

This booklet covers product code:
W BASIN08 C (Slotted)
WBASIN 09 C(Unslotted)
Helpline
0330 026 6273
Bristan Group Limited
Birch Coppice Business Park, Dordon, Tamworth, Staffordshire B78
1SG
A Masco Company
Website:
www.bristan.com
Telephone: [phone]
Email: [e-mail]
At Bristan, we want to make things as easy as possible for our customers.
That’s why we offer solid guarantees on all our products,
effective from the date of purchase, to give you peace
of mind.
To start your free guarantee, simply scan the QR code and
Register your product.
Alternatively, visit www.bristan.com/register to register
your product via a computer.
For full guarantee terms and conditions visit, www.bristan.com/guarantees