Bristan Quadrato Tap Range Wiring diagram

Installation Instructions & User Guide
Installation Instructions & User GuideInstallation Instructions & User Guide
Installation Instructions & User Guide
Quadrato Tap Range
Quadrato Tap RangeQuadrato Tap Range
Quadrato Tap Range
Please keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement partsPlease keep these instructions for future reference and request of replacement parts
Please keep these instructions for future reference and request of replacement parts

Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have
designed this product with your enjoy ent in ind. To ensure that it works to its full
potential, it needs to be fitted correctly. These fitting instructions have been created to give
you all of the infor ation you need and, if you need any further help, please do not hesitate
to give us a call on 0844 701 6273.
I portant Safety Infor ation 03
General Specifications 03
Installation Require ents 04-07
Installation 07-12
Basin & Bath Taps 07
S all Basin Mixer
08
Contents
ContentsContents
Contents
S all Basin Mixer
08
Eco Basin Mixer 09
Eco Basin Mixer (Without Waste) 09
Tall Basin Mixer 10
Bidet Mixer 11
Bath Filler 12
Bath Shower Mixer 12
Maintenance 13
Troubleshooting 14
Guarantee 15
02

Important Safety Information
Important Safety InformationImportant Safety Information
Important Safety Information
• Please read these instructions thoroughly and retain for future use.
• All products anufactured and supplied by Bristan are safe provided they are installed,
used correctly and receive regular aintenance in accordance with these instructions
• If you are in any doubt about your ability to install this product safely you ust
If you are in any doubt about your ability to install this product safely you ust If you are in any doubt about your ability to install this product safely you ust
If you are in any doubt about your ability to install this product safely you ust
e ploy the services of an experienced qualified plu ber.
e ploy the services of an experienced qualified plu ber.e ploy the services of an experienced qualified plu ber.
e ploy the services of an experienced qualified plu ber.
• Re ove all packaging and check the co ponents for da age before starting
installation.
• Before starting any installation please consider the following: Prior to drilling
into walls, check that there are no hidden electrical wires, cables or water supply
pipes. This can be checked with the aid of an electronic detector.
• If power tools are used do not forget to: - Wear eye protection
- Unplug equip ent after use
• This product ust
ust ust
ust not be odified in any way as this will invalidate the guarantee.
•
These fittings need to be installed in accordance with and eet the require ents of the Water
•
These fittings need to be installed in accordance with and eet the require ents of the Water
Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.
03
General Specifications
General SpecificationsGeneral Specifications
General Specifications
Operating pressure range (bar) Min Max
Basin & Bath Taps 0.2 8.0
S all Basin Mixer 0.5 8.0
Eco Basin Mixer 0.5 8.0
Tall Basin Mixer 0.4 8.0
Bidet Mixer 0.5 8.0
Bath Filler 0.3 8.0
Bath Shower Mixer 0.5 8.0
Maxi u static pressure – 10.0 bar
NOTE:- No inally equal (balanced) inlet supply pressures are reco ended for opti u
perfor ance.
Designed to co ply with BS EN 200 for single taps/ co bination taps for water syste s of type 1
and 2 general technical specifications and to be used within syste s designed to BS 6700.
BS 6700 reco ends the te perature of stored water should never exceed 65°C. A stored water
te perature of 60°C is considered sufficient to eet all no inal require ents and will ini ise
the build up of li e scale in hard water areas.
BRISTAN

Installation Requirements
Installation RequirementsInstallation Requirements
Installation Requirements
IMPORTANT
IMPORTANT IMPORTANT
IMPORTANT -
--
- PLEASE READ
PLEASE READPLEASE READ
PLEASE READ
This/these fitting/fittings needs/need to be
This/these fitting/fittings needs/need to be This/these fitting/fittings needs/need to be
This/these fitting/fittings needs/need to be
installed in accordance with the following
installed in accordance with the following installed in accordance with the following
installed in accordance with the following
Installation Require ents and Notes (IRN)
Installation Require ents and Notes (IRN) Installation Require ents and Notes (IRN)
Installation Require ents and Notes (IRN)
to ensure they eet the require ents of
to ensure they eet the require ents of to ensure they eet the require ents of
to ensure they eet the require ents of
the Water Supply (Water Fittings)
the Water Supply (Water Fittings) the Water Supply (Water Fittings)
the Water Supply (Water Fittings)
Regulations 1999 and the Scottish Byelaws
Regulations 1999 and the Scottish Byelaws Regulations 1999 and the Scottish Byelaws
Regulations 1999 and the Scottish Byelaws
2004.
2004.2004.
2004.
IRN R001
IRN R001 IRN R001
IRN R001 -
--
- QD ½ C, QD ¾ C, QD SMBAS C,
QD ½ C, QD ¾ C, QD SMBAS C, QD ½ C, QD ¾ C, QD SMBAS C,
QD ½ C, QD ¾ C, QD SMBAS C,
QD EBAS C, QD EBASNW C, QD TBAS C,
QD EBAS C, QD EBASNW C, QD TBAS C, QD EBAS C, QD EBASNW C, QD TBAS C,
QD EBAS C, QD EBASNW C, QD TBAS C,
QD BF C, QD BSM C
QD BF C, QD BSM CQD BF C, QD BSM C
QD BF C, QD BSM C
See text of entry for Installation
Require ents or Notes.
IRN R005
IRN R005 IRN R005
IRN R005 -
--
- QD BF C, QD BSM C
QD BF C, QD BSM C QD BF C, QD BSM C
QD BF C, QD BSM C
This tap or co bination tap asse bly has a
Type AUK2 air gap and is therefore only
suitable for installation in do estic pre ises
or in other pre ises to protect against a
IRN R030
IRN R030 IRN R030
IRN R030 -
--
- QD BSM C
QD BSM C QD BSM C
QD BSM C -
--
- Schedule 2
Schedule 2Schedule 2
Schedule 2-
--
-15 (1)
15 (1) 15 (1)
15 (1)
Multiple inlet fittings installed in do estic
pre ises or in other pre ises to protect
against a backflow risk up to a Fluid
Category 3, incorporating a self cancelling
diverter acceptable as a backflow prevention
device (HC) and having an AUK2 or AUK3 air
gap, shall be installed in accordance with
IRN R010.
Multiple inlet fittings installed in pre ises
other than do estic to protect against a
backflow risk up to a Fluid Category 5,
incorporating a self cancelling diverter
acceptable as a backflow prevention device
(HC only) and having an AUK2 or AUK3 air
gap, shall be installed in accordance with
IRN R010. Alternatively the fitting shall be
supplied in accordance with IRN R040 unless
the shower head is constrained above the
or in other pre ises to protect against a
backflow risk up to a Fluid Category 3, unless
additional backflow protection for the higher
risk is included in the installation.
IRN R006
IRN R006 IRN R006
IRN R006 -
--
- QD ½ C, QD ¾ C, QD SMBAS C,
QD ½ C, QD ¾ C, QD SMBAS C, QD ½ C, QD ¾ C, QD SMBAS C,
QD ½ C, QD ¾ C, QD SMBAS C,
QD EBAS C, QD EBASNW C, QD TBAS C
QD EBAS C, QD EBASNW C, QD TBAS CQD EBAS C, QD EBASNW C, QD TBAS C
QD EBAS C, QD EBASNW C, QD TBAS C
This tap or co bination tap asse bly has a
Type AUK3 air gap and is therefore for
installation in any pre ises to protect against
a backflow risk up to a Fluid Category 5.
IRN R010
IRN R010 IRN R010
IRN R010 –
––
– QD SMBAS C, QD EBAS C, QD
QD SMBAS C, QD EBAS C, QD QD SMBAS C, QD EBAS C, QD
QD SMBAS C, QD EBAS C, QD
EBASNW C, QD TBAS C, QD BF C
EBASNW C, QD TBAS C, QD BF C EBASNW C, QD TBAS C, QD BF C
EBASNW C, QD TBAS C, QD BF C
Schedule 2
Schedule 2Schedule 2
Schedule 2-
--
-15 (1)
15 (1)15 (1)
15 (1)
Water supplies shall be a reasonably
balanced pressures fro a co on source
(e.g. hot and cold supplies both fro the
sa e storage or both fro a supply pipe).
Where the fitting is supplied fro unbalanced
supplies (e.g. hot and cold supplies fro
separate sources) a ‘Listed’ single check
‘Listed’ single check ‘Listed’ single check
‘Listed’ single check
valve
valvevalve
valve or so e other no less effective backflow
prevention device shall be fitted i ediately
upstrea of both hot and cold water inlets.
the shower head is constrained above the
spill-over lever of the bath, wash basin or
shower tray.
IRN R070
IRN R070 IRN R070
IRN R070 –
––
– QD BID C
QD BID CQD BID C
QD BID C
The water supply (Water Fittings)
Regulations 1999 and the Water Bylaws
2000, Scotland preclude the connection of
ri feed ascending spray type bidets with
hand – held spray attach ents directly to
any supply pipe.
Continued overleaf.
04

AUK2 or AUK3 air
AUK2 or AUK3 air AUK2 or AUK3 air
AUK2 or AUK3 air
gap as
gap as gap as
gap as
appropriate
appropriateappropriate
appropriate
Washbasin,
sink or bath
Single check valves if
required
Cold water
supply
Hot water
supply
Co bination tap: -
Cutaway section
showing cold and
hot water ixing in
the body of the tap
Diagra 1
Diagra 1Diagra 1
Diagra 1
BIDETS WITH OVER
BIDETS WITH OVERBIDETS WITH OVER
BIDETS WITH OVER-
--
-RIM SUPPLY ARRANGEMENTS
RIM SUPPLY ARRANGEMENTSRIM SUPPLY ARRANGEMENTS
RIM SUPPLY ARRANGEMENTS
(a) Bidets installed in do estic locations of the
over – ri type, that have no ascending
spray and/or flexible hose ay be supplied
with cold and hot water through single or
co bination tap asse blies fro either a
supply pipe or distributing pipe providing
that a Type AUK2 air gap is provided
between the outlet of the water fitting and
the spillover level of the bidet and shall
also co ply with (c) below.
(a) Bidets installed in pre ises other than
do estic locations of the over – ri type,
that have no ascending spray and / or
flexible hose where a higher fluid category
of risk ay be present, ay be supplied
with cold and hot water through single or co bination tap asse blies fro either a
supply pipe or a distributing pipe providing that a Type AUK3 air gap is provided between
the outlet of the water fitting and the
spillover
level of the bidet as (a) above and shall also
BIDETS (INCLUDING WCS ADAPTED AS BIDETS) WITH SUBMERGED WATER INLETS AND / OR FLEXIBLE
BIDETS (INCLUDING WCS ADAPTED AS BIDETS) WITH SUBMERGED WATER INLETS AND / OR FLEXIBLE BIDETS (INCLUDING WCS ADAPTED AS BIDETS) WITH SUBMERGED WATER INLETS AND / OR FLEXIBLE
BIDETS (INCLUDING WCS ADAPTED AS BIDETS) WITH SUBMERGED WATER INLETS AND / OR FLEXIBLE
HOSE WITH SPRAY OR JET HANDSET FITTINGS
HOSE WITH SPRAY OR JET HANDSET FITTINGSHOSE WITH SPRAY OR JET HANDSET FITTINGS
HOSE WITH SPRAY OR JET HANDSET FITTINGS
Bidets, including WCs adapted as bidets,
incorporating and ascending spray inlet or
utilising a flexible hose or an arrange ent with a
spray or jet, are a fluid category 5 risk in that the
ascending spray inlet could be conta inated
with urine or other atter and the spray or jet
handset could be deposited in the bidet or WC.
Bidets of this type ust not be supplied with
water fro a cold or hot water supply pipe or a
co on distributing pipe. The zone of backflow
risk is shown and the highest part of this zone
ust be not less that 15 below any cistern
serving the bidet. See Diagra 2 below. 5
Hose and spray
Bidet
FL
Independent
distributing
pipes for cold
and hot water
Zone of
backflow risk
Not less than 15
WP
Type AG
air gap
Diagra 2
Diagra 2Diagra 2
Diagra 2
the outlet of the water fitting and the
spillover
level of the bidet as (a) above and shall also
co ply with (c) below.
(c) In case of a bidet equipped with a single outlet (single flow) ixing tap, shall also be
installed in accordance with IRN R010. See Diagra 1 below
05
,/
/
,,.,.-
/
I
I
I
I
I
I
\
\
\
I
\ \
\,
'\.'-..'
BRISTAN
-...___
r--- ------ -
'"-,(
\ \ \
\
\
I
J
I
I
I
I
I
/

Bidets of this type ay:
a. Be supplied with cold and / or hot water
through type AA, AB, AD or AUK1 backflow
prevention arrange ent or type DC device
serving the bidet only. See Diagra 3: or
Type AA, AB, AD or AUK1 air gap with or
Type AA, AB, AD or AUK1 air gap with or Type AA, AB, AD or AUK1 air gap with or
Type AA, AB, AD or AUK1 air gap with or
without blended water cistern or type DC
without blended water cistern or type DC without blended water cistern or type DC
without blended water cistern or type DC
backflow Prevention device.
backflow Prevention device.backflow Prevention device.
backflow Prevention device.
b. Be supplied with cold water fro an
independent distributing pipe serving the
bidet only, or a co on distributing pipe
serving the bidet and which ay also serve
a WC or urinal flushing cistern at a lower
level. See Diagra 4; or
c. Be supplied with hot water fro a water heater, which is supplied fro an independent
distributing pipe, that serves the bidet only. See Diagra 4: or
Diverter or
separate control
valves to hose or
ascending spray
Type AA, AB, AD or AUK1 air gap with
or without blended water cistern or
Type DC backflow prevention device
Zone of backflow risk
300 ini u
Hot and
cold water
supply or
distributing
pipes to
ixer
Blended cold
and hot water
distributing
pipe
FL
Diagra 3
Diagra 3Diagra 3
Diagra 3
distributing pipe, that serves the bidet only. See Diagra 4: or
d. Where the bidet is at a lower elevation than
any other outlets or appliances, be supplied
with water fro a co on cold and / or
hot water vented distribution pipe providing
that;
(i) the elevation of the spillover level of the
bidet, if there is no flexible hose; or
(ii) the elevation of the spray outlet, with the
hose extended vertically above the spill
over level of the bidet
Whichever is the highest, is not less than
300 below the point of connection with the
distributing pipe which serves over appliances
or outlets. See Diagra 5.
SgV WP
Storage cistern with
Type AG air gap
Hot water
heater serving
single bidet only
(see G15.10c)
FL
DP to serve WC
or urinal flushing
cistern only (see
G15.10b)
Cold water DP to
other appliances
Bidet
Diagra 4
Diagra 4Diagra 4
Diagra 4
06
BRISTAN
/
/
/
\ -~
,,.,,,.,.,..
I
I
I
I
I
I
\
\
\\ \ ''"
"
_J
-........._
' ' '"
Fl.,,.ible ho5e \\
and spray
I
/
'
\
1
\
I
I
I
}
I
I

The ethod of supplying water to an
ascending spray and / or hose and
spray bidet is illustrated in Diagra
3 and which is described in the for al
guidance, is difficult to achieve in
practice. The air gap should be located
above the fully extended hose and spray,
or zone of backflow risk, and this height
ay need to be increased to provide
sufficient water pressure, to overco e
friction loss in the pipes and fittings, in
order to operate the ascending spray
and hose spray effectively. This ethod
of supplying blended water to a bidet
involves co plicated control ethods
as the control of water to the bidet
itself has to be linked with the control
of water flow, and te perature, upstrea of the air gap,
blended water cistern or DC device.
Diagra 5
Diagra 5Diagra 5
Diagra 5
Cold water
storage
cistern
SgV SgV SgV
The bidet ust be located
below the spillover lever of the
lowest sanitary fitting and
below any hot water storage
vessel or ancillary pipework
Not less
than
300
Bidet with
ascending
spray only
Not less
than
300
Mixing
valve
Bath
Washbasin
FL
Diagra 5
Diagra 5Diagra 5
Diagra 5
blended water cistern or DC device.
Installation
Installation Installation
Installation -
--
- Basin
Basin Basin
Basin / Bath taps
/ Bath taps/ Bath taps
/ Bath taps
1. Identify all co ponents are present prior to starting
installation.
2. Install the taps to the basin / bath, ensuring the plinth
is fitted between the tap body and the basin / bath. Slide
the washer (6) onto the threaded tail of the tap and screw
the backnut (7) onto the tail until tight to secure the taps
in place.
Note
NoteNote
Note:
: :
: Supplied with plastic backnuts which ust be
tightened fully using a suitable spanner.
3. Connect the hot and cold water supplies to the
threaded tails.
4. Turn on the water supplies. Operate both taps, letting
the water flow for a few inutes to check all joints and
connections for any leaks.
07
BRISTAN
1 2 3
11 ~~~.I
J
4 --

Installation
Installation Installation
Installation –
––
– Small Basin Mixer
Small Basin MixerSmall Basin Mixer
Small Basin Mixer
1. Identify all co ponents are present prior to starting
installation.
2. Install the ixer body (7) to the basin,
ensuring plinth (8) and washer (9) and
fitted between the ixer body (7) and the basin.
3. Screw the threaded rods (12) and flexible connecting
pipes(14) into the botto of the ixer body (7).
4. Slide the ‘C’ shape rubber washer (10) and ‘c’ shaped etal
washer (11) onto the threaded rods (12) up to the underside
of the basin.
5. Secure the ixer body (7) to the basin by tightening the fixing
nuts (15) onto the threaded rods (12) until they are fully
1
2
3
4
5
6
7
08
tightened against the ‘C’ shaped etal washer (11).
6. Turn on both water supplies and operate
the lever handle (3)up and side to side,
letting the water flow for a few inutes to
check all joints and
connections for any
leaks.
7
8
9
10
11
12
13
14
BRISTAN
[(]]II_

Installation
Installation Installation
Installation -
--
- Eco
Eco Eco
Eco Basin Mixer & Eco Basin Mixer (No Waste)
Basin Mixer & Eco Basin Mixer (No Waste) Basin Mixer & Eco Basin Mixer (No Waste)
Basin Mixer & Eco Basin Mixer (No Waste)
1. Identify all co ponents are present prior to starting installation.
2. Fit the ixer body to the basin/bidet using the 'C' plate fixing kit. The full rubber
washer (8) goes between the fitting and the basin and the 'C' shaped rubber (9) and
etal washers (10) on the underside of the basin to be secured by the nuts (12) and
threaded rods (11).
3. Fit the flexible tail pipes (13) by (HAND ONLY)
(DO NOT OVERTIGHTEN) inside of the fitting
and connect the hot and cold supplies using
washers (14) and suitable fittings (Not Supplied).
4. Fit the pop up waste (if applicable) washer (16)
above and washer (18) below the basin/bidet.
It is reco ended that a silicone sealant be
applied to both sealing faces of washers 16 and
18. The plug height can be set by, adjusting the
(See ADDITIONAL
(See ADDITIONAL (See ADDITIONAL
(See ADDITIONAL
SAFETY FEATURE)
SAFETY FEATURE)SAFETY FEATURE)
SAFETY FEATURE)
18. The plug height can be set by, adjusting the
waste rod (6) and operating rod (19) connecting
bracket(15), and the screw in the base of the plug.
Friction for the waste echanis can be
adjusted using the waste cap (20) (DO NOT
OVER-TIGHTEN).
5. Fully open the ixer in the id position,
letting it run for a few inutes and check all
joints and connections for leaks.
An innovative water saving feature
that offers a subtle resistance as it
reaches, approxi ately half of its
full flow capability. For increased flow this feature
can be overridden. At full flow the click cartridge
uses 32% less water than a standard cartridge and
when in eco click ode the reduction increases to 72%.
09
BRISTAN
s--8
14---

1
2
3
4
5
6
7
Installation
Installation Installation
Installation –
––
– Tall Basin Mixer
Tall Basin MixerTall Basin Mixer
Tall Basin Mixer
1. Identify all co ponents are present prior to starting
installation.
2. Install the ixer body (7) to the basin, ensuring the
plinth (8) and washer (9) are fitted between the ixer
body (7) and the basin.
3. Screw the threaded rods (12) into the botto of the ixer
body (7).
Note:
Note: Note:
Note: The copper connecting pipes are pre-installed into the ixer
body (7). DO NOT
DO NOT DO NOT
DO NOT atte pt to re ove the as this could cause a
leak fro the connection.
4. Slide the ‘C’ shaped rubber washer (10) and ‘C’ shaped etal
washer (11) onto the threaded rods (12) up to the underside
of the basin.
5.
Secure the ixer body (7) by tightening the
10
8
9
10
11
12
13
14
5.
Secure the ixer body (7) by tightening the
fixing nuts (13) onto the threaded rods (12)
until they are fully tightened against the
‘C’ shaped etal washer (11).
6. Turn on both water sup[plies
and operate the lever handle (3)
up and side to side, letting the
water flow for a few inutes to
check all joints and
connections for and leaks.
BRISTAN
1zce-
[[]][[]]_
I
I I
I I I
I~
~ -
'~ ""---
~ -

Installation
Installation Installation
Installation -
--
- Bidet
Bidet Bidet
Bidet Mixer
Mixer Mixer
Mixer
1. Identify all co ponents are present prior to starting installation.
2. Fit the ixer body to the bidet ensuring the plinth (7) and washer (8) are fitted between
the ixer body and the bidet.
3. Screw the fixing rods (11) into the botto of the ixer body.
4. Slide the ‘C’ shaped rubber washer (9) and ‘C’ shaped etal washer (10) onto the fixing
studs (11) up to the underside of the bidet.
5. To secure the ixer in place tighten the fixing nuts (12) onto the threaded rods (11)
until they are fully tightened against the ‘C’ shaped etal washer (10).
6. Screw in the flexible connecting pipes (13) and tighten by hand only (DO NOT
hand only (DO NOT hand only (DO NOT
hand only (DO NOT
OVERTIGHTEN)
OVERTIGHTEN)OVERTIGHTEN)
OVERTIGHTEN).
7. Connect the hot and cold water supplies to the flexible connecting pipes (13).
8. Turn on both water supplies, lift the ixer handle (3) upwards and operate in both
directions, letting the water flow for a few inutes to check all joints and connections
for any leaks.
13
2
4
5
6
7
8
9
10
11
12
13
11
BRISTAN
"- o -
' ,.
I
LJ -
~ -

Installation
Installation Installation
Installation -
--
- Bath Shower Mixer
Bath Shower MixerBath Shower Mixer
Bath Shower Mixer
Installation
Installation Installation
Installation -
--
- Bath Filler
Bath FillerBath Filler
Bath Filler
1. Identify all co ponents prior to
installation
1. Install the fittings onto the bath
using the provided washers (6),
above and below the bath and back
nuts (7), below the bath.
2. Connect the hot and cold water
supplies.
3. Fully open both valves, letting the
water to flow for a few inutes and
check all joints and connections
for leaks.
1. Identify all co ponents prior to
installation
2. Install the fittings onto the bath using
the provided washers (6), above and
below the bath and back nuts (7), below
the bath.
3. Connect the hot and cold water supplies.
4. Fit the hose to the ixer (11) and the
handset using the s all sealing washers.
5. To fit wall bracket, position, ark out
and drill holes to suit, then screw wall
bracket to the wall, ensuring that the
handset will reach it.
6. Fully open both valves, letting the water to flow for a few inutes and check all joints
and connections for leaks.
7. Operate the ixer in both bath and shower ode. To switch fro bath to shower
ode pull the diverter knob (8) up. After use the ixer auto atically reverts to the
bath filling ode.
12
BRISTAN
1 2 3
~ ~
4 ----+
5~
1 2 3
! ~

General Cleaning
General CleaningGeneral Cleaning
General Cleaning
Your fitting has a high quality finish and
should be treated with care to preserve
the visible surfaces. All finishes will
wear if not cleaned correctly. The only
safe way to clean your product is to wipe
with a soft da p cloth. Stains can be
re oved using washing up liquid. All
bathroo cleaning products (powders
and liquids) will da age the surface of
your fitting, even the non-scratch
cleaners.
Note:
Note:Note:
Note: Never use abrasive detergents or
disinfectants or those containing
alcohol, hydrochloric acid or phosphoric
acid.
Bristan reco end E-
cloth for cleaning all of
Maintenance
MaintenanceMaintenance
Maintenance
See ap of Hard Water Regions in the UK
overleaf to see the water type in your area.
Maintenance
MaintenanceMaintenance
Maintenance
We advise that your fitting is regularly
serviced in hard water areas to aintain
opti u perfor ance (see ap of Hard
Water Regions in the UK overleaf).
If your fitting begins to leak the following
should be carried out;
Isolate both hot and cold water supplies to
the kitchen ixer by either:
•Turning the water supply off at the ains
stopcock or
•Turning off the isolation valves to the
kitchen ixer.
cloth for cleaning all of
our bathroo & kitchen
products. Using just
water, E-cloth gives a s ear
free, deep clean by breaking up and
holding dirt, which nor al cloths leave
behind. Order through your Bristan
stockist (order code: ECLOTH).
Cleaning the Showerhead
Cleaning the Showerhead Cleaning the Showerhead
Cleaning the Showerhead –
––
– QD BSM C
QD BSM CQD BSM C
QD BSM C
Your Bristan showerhead has rub-clean
nozzles for easy cleaning. Si ply rub your
fingers across the rubber spray jets
regularly and before you turn the shower on
to re ove any scale or debris.
The hardness of the water in your area will
deter ine how often you should clean your
showerhead. Build up of scale in particularly
hard water areas co bined with constant
use eans you ay need to clean your
showerhead once a week. To ensure
continued perfor ance the showerhead
needs to be regularly descaled.
kitchen ixer.
1. Prise the cap off fro the handle and
loosen the grub screw.
2. Pull the handle fro the spline of the
valve / cartridge.
3. Re ove the valve fro the body by
unscrewing it with a suitable spanner.
If cartridge unscrew shroud, re ove
cartridge retaining nut using a suitable
spanner and pull cartridge fro the body.
3. Clean the valve / cartridge and seating, if
necessary replace the valve / cartridge.
4. Replace the valve and tighten fully using a
suitable spanner.
The cartridge has locating pins on the
botto which align with locating holes in
the body. Tighten the cartridge retaining
nut and screw the shroud back on.
6. Replace the handle, tighten the grub
screw and push the cap back on.
13
BRISTAN

Sy pto
Sy ptoSy pto
Sy pto Cause
CauseCause
Cause Re edy
Re edyRe edy
Re edy
No flow or poor flow
rate.
Partially closed stop or service
valve in water supply pipework to
the tap.
Open stop or service valve.
Head of water is below the
ini u distance required.
Refer to the Specification section
for ini u pressures required.
Possible airlock / blockage in
supply pipework
Re ove water supplies fro the
fitting and flush the syste to
re ove any airlocks / debris.
Cartridge / Valve not opening
fully.
Service fitting. Refer to
aintenance section on page 13.
Water dripping for a few
seconds after the tap
has been turned off.
This is caused by ‘capillary
action’ and residual water in the
spout being siphoned out. This
should only last for a couple of
seconds.
If the fitting is fitted with an
aerator this can be replaced with
a ore restrictive type to reduce
the a ount of water that drips
out.
Troubleshooting
TroubleshootingTroubleshooting
Troubleshooting
Constant dripping /
leaking when the tap is
not in use.
Cartridge / Valve not fully
shutting off.
Service fitting and replace
cartridge / valve. Refer to
aintenance section on page 13.
Fitting does not turn on. Water supplies not turned on. Check that the water supplies to
the fitting are turned on.
Closed stop or service valve. Open stop or service valve.
Water does not co e
out of the showerhead
when using the bath
shower ixer.
Diverter echanis not fully
open.
Open the diverter echanis
fully by pulling the diverter knob
up.
Insufficient water pressure /
header height.
Refer to the specification section
for ini u pressures required.
Water fro the bath
shower ixer
showerhead is not hot.
Hot valve not fully open. Open the valve by turning the
handle.
Possible blockage in shower
hose or handset restricting water
supply.
Check shower hose and handset
for any blockages.
Insufficient header height / water
pressure.
Refer to the specification section
for ini u pressures required.
14

Bristan Guarantee
Bristan GuaranteeBristan Guarantee
Bristan Guarantee
Bristan offers solid guarantees to provide you with co plete peace of ind.
Taps and Mixers
Taps and MixersTaps and Mixers
Taps and Mixers
5 year parts and 1 year labour*. Gold, painted and special finishes 3 years parts only.
All subject to proof of purchase.
Mixer Shower Valves
Mixer Shower ValvesMixer Shower Valves
Mixer Shower Valves
5 year parts. 5 year labour* (subject to registration), or 1 year with proof of purchase.
Gold, painted and special finishes 3 years parts only.
Pu ps and Power Showers
Pu ps and Power Showers Pu ps and Power Showers
Pu ps and Power Showers
2 year parts. 1 year labour* (subject to registration).
Electric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water HeatersElectric Showers/Instantaneous Water Heaters
Electric Showers/Instantaneous Water Heaters
2 year parts. 1 year labour* (subject to registration).
Accessories
AccessoriesAccessories
Accessories
5 year parts only. Includes bathroo s accessories, shower accessories (e.g. hoses, handsets and poles), wastes,
WC levers and light pulls. Gold, painted and special finishes 3 years parts only.
Sanitaryware
SanitarywareSanitaryware
Sanitaryware
5 year parts only. Subject to proof of purchase.
*Labour provided by an approved Bristan engineer. Guarantee only applies to products with a anufacturing fault.
A deferred pay ent will be necessary in order to secure any visits by our engineers which will be charged if the
proble is found not
notnot
not to be a anufacturing fault. If the fault is found to be down to a anufacturing error, the
pay ent will be released and not charged.
This guarantee applies to products purchased within the United Kingdo or Republic of Ireland, but does not apply
to products used co ercially.
to products used co ercially.
The guarantee is only available to original purchasers who have proof of purchase.
The installation ust allow ready access to all products for the purpose of inspection, aintenance or
replace ent.
Any part found to be defective during the above guarantee period will be replaced without charge, providing that the
product has been installed in accordance with the instructions, used as intended, and regularly serviced.
Servicing should be carried out at regular intervals of no ore than 12 onths and ore frequently in hard water
areas (heavy li e scale) areas.
In the unlikely event that any proble s are encountered with the product’s perfor ance on installation, you ust
obtain guidance/authorisation fro our Custo er Service Depart ent, and be able to supply proof and date of
purchase, before any re edial action is taken.
The guarantee excludes general wear and tear and da age caused by accident, isuse or neglect, and does not
cover the following:
. Co ponents that are subject to general wear and tear such as filters, seals, ‘O’ rings and washers etc.
· Da age caused by faulty installation
· Da age caused by li e scale or any waterborne debris
· Da age caused by inappropriate cleaning products (see user instructions)
· Da age caused by the use of non-Bristan parts
· The product being used for a purpose other than intended by the anufacturer.
In the interests of continuous product i prove ent Bristan reserves the right to alter specification as necessary.
15
BRISTAN
Guarantee

This booklet covers product codes
QD ½ C, QD ¾ C, QD SMBAS C, QD EBAS C, QD EBASNW C
QD TBAS C, QD BID C, QD BF C, QD BSM C
Helpline
HelplineHelpline
Helpline
844 7 1 6273
844 7 1 6273844 7 1 6273
844 7 1 6273
FI (QUADRATO) – REV. D6
844 7 1 6273
844 7 1 6273844 7 1 6273
844 7 1 6273
Bristan Group Limited
Birch Coppice Business Park, Dordon, Tamworth, Staffordshire B78 1SG
A Masco Company
Website: www.bristan.com
Telephone: [phone] Facsimile: 844 7 1 6275
Email: [e-mail]
BRISTAN

Check out our full range of Bathroom Taps
Contemporary Bathroom Taps
Traditional Bathroom Taps
Waterfall Bathroom Taps
Basin Taps
Bath Taps
Bidet Taps
Luxury Mira Aspects Taps
Mira Honesty
Mira Evolve
Mira Precision
Mira Comfort
Mira Revive
Mira Fluency
Don’t forget these amazing tap cleaning and care products
Cramer Tap Cleaner
Cramer Chrom Star Chrome Polish