Britax GROW WITH YOU CLICKTIGHT User manual

Tel.: [phone]
Tel.: [phone]
www.Britax.com
Britax Child Safety, Inc.
4140 Pleasant Road
Fort Mill, SC 29708 USA
A Britax Childcare company
GROW WITH YOU™
CLICKTIGHT®
GROW WITH YOU™
CLICKTIGHT® PLUS
User Guide
Guíde d'utilisation
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 1P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 1 1/29/2020 9:17:23 AM1/29/2020 9:17:23 AM

P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 2P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 2 1/29/2020 9:17:23 AM1/29/2020 9:17:23 AM

Table of Contents
Child Seat Features ��������������������������������������� 2
Safety Information����������������������������������������� 4
Warnings������������������������������������������������������������������ 4
Important Notes������������������������������������������������������� 5
Registration�������������������������������������������������������������� 6
Certification�������������������������������������������������������������� 6
Child Fit Information ������������������������������������������������ 7
Installing the Child Seat�������������������������������� 8
General Information ������������������������������������������������� 8
Installation in Harness Mode ��������������������������������� 10
Installation in Booster Mode���������������������������������� 16
Securing Your Child������������������������������������� 18
Harness Mode�������������������������������������������������������� 18
Booster Mode �������������������������������������������������������� 20
Child Seat Functions ����������������������������������� 22
Adjusting Harness and Head Restraint Height ������ 22
Overhang ��������������������������������������������������������������� 23
Adjusting Buckle Position �������������������������������������� 23
Using the Harness Buckle ������������������������������������� 25
Using the Chest Clip���������������������������������������������� 25
Using the Recline��������������������������������������������������� 25
Using the Lower Universal Anchorage System
(LUAS) and Tether �������������������������������������������������� 26
Using the Lower Connectors ��������������������������������� 26
Using the Impact Absorbing Tether ����������������������� 27
Switching Between Modes ������������������������������������ 29
Uninstall the Seat��������������������������������������������������� 35
Vehicle Compatibility����������������������������������� 36
Incompatible Vehicle Seat Belts ���������������������������� 36
Vehicle Buckle Positions ���������������������������������������� 37
Vehicle Seating Positions��������������������������������������� 37
Maintenance ������������������������������������������������ 38
Removing the Cover ���������������������������������������������� 38
Replacing the Cover ���������������������������������������������� 40
Removing the Buckle��������������������������������������������� 41
Replacing the Buckle��������������������������������������������� 42
Cleaning ������������������������������������������������������� 43
Warranty ������������������������������������������������������� 44
User Guide - English
BRITAX®, GROW WITH YOU™ CLICKTIGHT®and EZ-Buckle™ are
trademarks owned by Britax Child Safety, Inc� All Rights Reserved� ©2020
Britax Child Safety, Inc� This product and Its components are subject to
change without notice� Printed in U�S�A� P12378900_A:1�20
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 1P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 1 1/29/2020 9:17:23 AM1/29/2020 9:17:23 AM

2
BRITAX Child Safety, Inc.
Child Seat Features
Front
Rear
31
33
32
20
21
22
23
24
26
27
28
29
30
1
2
3
6
5
7
8
10
11
4
9
14
15
16
17
12
13
18
F
E
A
T
U
R
I
N
G
34
19
25
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 2P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 2 1/29/2020 9:17:24 AM1/29/2020 9:17:24 AM

3
GROW WITH YOU CLICKTIGHT / PLUS User Guide
Child Seat Features
Front
Rear
Description
1� Cover
2� Side Impact Cushion (Grow With You ClickTight Plus
ONLY)
3� Arm Rest
4� Booster Mode Belt Guide
5� Cup Holder and Storage
6� Harness and Head Restraint Height Adjuster
7� Head Restraint
8� Shoulder Belt Guide
9� Stay Put Comfort Pads
10� Impact Absorbing Chest Pads (Select Model)
11� Chest Clip
12� User Guide Storage (in pocket behind cover)
13� Harness Buckle
14� Lower Connector Storage (under CLICKTIGHT)
15� EZ-Buckle™ Belly Pad
16� Harness Adjuster Release Lever (under flap)
17� Harness Adjuster Strap
18� Recline Adjuster Handle
19� Serial Number and Manufactured Date Label (Grow With
You ClickTight ONLY)
20� Tether Adjuster
21� Tether Hook
22� Tether Webbing
23� Tether Storage Strap
24� Harness Straps
25� National Safety Mark
26� Harness Mode Belt Path - Green (CLICKTIGHT)
27� Serial Number and Manufactured Date Label (Grow With
You ClickTight Plus ONLY)
28� Lower Connector Adjuster Button (LUAS)
29� Lower Connector Adjuster (LUAS)
30� Lower Connector Release Button (LUAS)
31� Lower Connector (LUAS)
32� Shell
33� Harness Yoke
34� Impact Absorbing Base
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 3P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 3 1/29/2020 9:17:24 AM1/29/2020 9:17:24 AM

4
BRITAX Child Safety, Inc.
WARNING!
Safety Information
Failure to follow all warnings and instructions on the restraint
system could result in SERIOUS INJURY or DEATH�
FIT REQUIREMENTS
• Harness Mode: Use only with children who weigh
between 11�3 and 30 kg (25 and 65 lbs) and whose
height is between 85 and 125 cm (34 and 49 in�) and
are at least 2 years of age�
• Booster Mode: Use only with children who weigh
between 18 and 54 kg (40 and 120 lbs) and whose
height is between 112 and 160 cm (44 and 63 in�)�
• Snugly adjust the belts provided with this child restraint
around your child�
INSTALLATION
• Secure the top tether strap provided with this child seat
in harness mode� It is recommended that the top tether
strap is used in booster mode�
• Use only the vehicle’s lap and shoulder belt system
when restraining the child in this booster seat�
• Secure this child restraint with the vehicle’s lower connector
system if installed in a seating position that is equipped
with a lower universal anchorage system or by means of a
vehicle seat belt and by means of a tether strap�
GENERAL USAGE
• Follow all instructions on this child restraint and in the
written instructions�
• Register your child restraint with the manufacturer�
• The top tether must be used at all times when installing
the child seat in harness mode� Using the top tether
will improve the stability of your child seat and reduce
the risk of injury�
• Use this seat forward-facing only�
• This child seat must be used in the upright position in
booster mode�
• In a vehicle with rear designated seating positions,
vehicle owners should be alerted that, according to
accident statistics, children are safer when properly
restrained in the rear seating positions than in the front
seating positions� To ensure your child’s safety, please
study Vehicle Seating Positions on page 37 and consult
your vehicle owner’s manual�
• To prevent injury due to deterioration or hidden damage,
discontinue use of this child seat when it is older than
nine (9) years or has been in a moderate or severe crash�
See expiration date on Serial Number and Manufactured
Date Label located on the child seat shell� See page 3�
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 4P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 4 1/29/2020 9:17:24 AM1/29/2020 9:17:24 AM

5
GROW WITH YOU CLICKTIGHT / PLUS User Guide
• Always make sure the child restraint system is secured
to the vehicle, even when unoccupied, since in a
crash an unsecured child restraint system may injure
occupants� The unoccupied child seat can be secured
to the vehicle by attaching the lower connectors to the
lower anchors in the vehicle, or by fastening the vehicle
seatbelt across the unoccupied child seat�
• The use of non-Britax covers, inserts, toys, accessories,
or tightening devices is not approved by Britax� Their
use could cause this child seat to fail Canada Motor
Vehicle Safety Standards or not perform as intended in
a crash�
• Grow With You ClickTight Plus - Prevent the Side
Impact Cushions from being punctured� Puncture
damage will cause the cushions not to perform as
intended in a crash�
Important Notes
• Third party recommendations are subject to change, so
we recommend you visit their websites for the most up
to date recommendations�
• Before each use, check this child seat and its
components to make sure they are in good condition
and good working order�
• Do not install with LUAS for a child weighing more than
18 kg (40 lbs) in harness mode�
• Discontinue use of this child seat if it has been in a
moderate or severe crash� It is not necessary to replace
a car seat after a minor crash defined by the US National
Highway Trac Safety Administration (NHTSA) as:
* The vehicle is driveable from the crash site; and
* The vehicle door nearest the child seat was not
damaged; and
* No vehicle occupants were injured; and
* There is no visible damage to the child seat; and
* The airbags (if present) did not deploy�
• Cover the child seat when the vehicle is parked in direct
sunlight� Metal parts of child seat could become hot
enough to burn a child�
• Store the child seat in a safe place when it is not being
used� Avoid placing heavy objects on top of it�
• Do not, except as described in this booklet, attempt to
disassemble any part of the child seat or change the
way the harness or vehicle’s seat belts are used�
• Never use the harness or adjuster strap to lift or carry
this child seat� Doing so could damage the harness
adjuster and webbing� Always carry this child seat by
the shell or tether straps�
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 5P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 5 1/29/2020 9:17:24 AM1/29/2020 9:17:24 AM

6
BRITAX Child Safety, Inc.
Registration
Child seats can be recalled for safety reasons� You must
register this child seat to be reached in a recall� Send your
name, address, and the child seat’s model number and
manufacturing date to Britax Child Safety, Ltd�, P�O Box
7289 RPO Brunswick Square, Saint John NB E2L 4S6, or
call 1-888-427-4829, or register online at us.britax.com/
registration�
For your convenience, record all the information about
your child seat below� Refer to the Serial Number &
Manufactured Date Label for all information (see page 3)�
Model Name and Number: ______________________________
Serial Number: ________________________________________
Batch Number: ________________________________________
Date of Manufacture:___________________________________
Certification
This restraint is certified for use in motor
vehicles and aircraft when used in harness
mode� This restraint is not certified for
use in aircraft when used in booster mode
because belt-positioning boosters require
lap-shoulder belts not available in aircraft�
Motor Vehicles
This child seat system conforms to all applicable Canada
Motor Vehicle Safety Standards (CMVSS 213 and 213�2)�
Aircraft
For aircraft installation, follow the instructions on pages
14-15 while routing the lap belt over the CLICKTIGHT in
the closed position� The tether cannot be used�
– Install your child seat in a window seat to avoid
blocking the aisle�
– If the aircraft lap belt is too short, ask a flight attendant
for a belt extender�
– Your child may experience discomfort if the buckle
is located in the seating area of the child seat after
installation�
– Inflatable aircraft lap belts are not compatible with this
child seat�
– This seat may not fit all aircraft� Contact your airline
prior to travel to verify fit�
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 6P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 6 1/29/2020 9:17:24 AM1/29/2020 9:17:24 AM

7
GROW WITH YOU CLICKTIGHT / PLUS User Guide
Child Fit Information
Harness Mode
Children must:
1� Be at least two years of age; and
2� weigh between 11�3 and 30 kg (25 and 65 lbs); and
3� stand between 85 and 125 cm (34 and 49 in�) in height;
and
4� the top of the child’s ears
must be below the top of
the head restraint when
seated; and
5� the harness straps must
be in the closest position
at or above the child’s
shoulders when seated�
Booster Mode
NOTE: Britax recommends booster mode only after the
child outgrows harness mode.
Children must:
1� Weigh between 18 and 54 kg (40 and 120 lbs); and
2� stand between 112 and 160 cm (44 and 63 in�) in height;
and
3� the top of the child’s
ears must be below
the top of the head
restraint; and
4� the vehicle shoulder
belt must lay straight
across the center
of the child’s chest,
with the shoulder
belt guide positioned
above the child’s
shoulders; and
5� the lap belt is routed
under the armrests,
low across the child’s
upper thighs�
Registration
Child seats can be recalled for safety reasons� You must
register this child seat to be reached in a recall� Send your
name, address, and the child seat’s model number and
manufacturing date to Britax Child Safety, Ltd�, P�O Box
7289 RPO Brunswick Square, Saint John NB E2L 4S6, or
call 1-888-427-4829, or register online at us.britax.com/
registration�
For your convenience, record all the information about
your child seat below� Refer to the Serial Number &
Manufactured Date Label for all information (see page 3)�
Model Name and Number: ______________________________
Serial Number: ________________________________________
Batch Number: ________________________________________
Date of Manufacture:___________________________________
Certification
This restraint is certified for use in motor
vehicles and aircraft when used in harness
mode� This restraint is not certified for
use in aircraft when used in booster mode
because belt-positioning boosters require
lap-shoulder belts not available in aircraft�
Motor Vehicles
This child seat system conforms to all applicable Canada
Motor Vehicle Safety Standards (CMVSS 213 and 213�2)�
Aircraft
For aircraft installation, follow the instructions on pages
14-15 while routing the lap belt over the CLICKTIGHT in
the closed position� The tether cannot be used�
– Install your child seat in a window seat to avoid
blocking the aisle�
– If the aircraft lap belt is too short, ask a flight attendant
for a belt extender�
– Your child may experience discomfort if the buckle
is located in the seating area of the child seat after
installation�
– Inflatable aircraft lap belts are not compatible with this
child seat�
– This seat may not fit all aircraft� Contact your airline
prior to travel to verify fit�
Shoulder level
Above Shoulder Level
Below Shoulder Level
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 7P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 7 1/29/2020 9:17:25 AM1/29/2020 9:17:25 AM

8
BRITAX Child Safety, Inc.
Installing the Child Seat
General Information
Harness Mode
Install forward-facing only�
DO NOT use anything to raise the child seat o of the
vehicle seat�
Do not install with LUAS for a child weighing more than
18 kg (40 lbs) in harness mode�
The top tether must be used at all times when installing
the child seat in harness mode� Using the top tether will
improve the stability of your child seat and reduce the
risk of injury�
• Use this child seat in harness mode with children at
least 2 years of age and who weigh between 11�3 and
30 kg (25 and 65 lbs) and who stand between 85 and
125 cm (34 and 49 in�) in height� Britax recommends
using harness mode until your child outgrows its fit
requirements� See the Child Fit Information section on
page 7 for more information�
• This seat may be used in
either the upright or recline
position in harness mode
(see figures at right)�
WARNING!
Upright Position
Recline Position
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 8P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 8 1/29/2020 9:17:26 AM1/29/2020 9:17:26 AM

9
BRITAX Child Safety, Inc. GROW WITH YOU CLICKTIGHT / PLUS User Guide
Booster Mode
• Position forward-facing only in a seating position with
a lap-shoulder belt�
• Use only the vehicle’s lap and shoulder belt system
when securing a child in booster mode� Never secure
a child with a lap belt only in booster mode�
• Always secure the unoccupied child seat�
• If the lower anchors in your vehicle prevent proper
vehicle belt fit across your child you cannot use LAUS
to position this seat in booster mode� See below�
• The vehicle belt fits properly when
the lap part sits low across the
child’s upper thighs (B) and the
shoulder part lies across the center of
the child’s chest and does not contact
the child’s neck when routed
through the upper belt guide (A)�
• This child seat can be used in booster mode with
children who weigh between 18 and 54 kg (40 and 120
lbs) and stand between 112 and 160 cm (44 and 63 in�)
in height� Britax recommends using booster mode only
once your child has outgrown harness mode�
• This child seat cannot be
in the reclined position
when used in booster
mode�
• In booster mode,
this child seat can
be positioned on the
vehicle seat using the
LUAS system�
• Use the vehicle’s lap-
shoulder belt to secure
the child� Ensure that
the LUAS system does
not interfere with the
vehicle belt function
and alignment when
securing your child�
WARNING!
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 9P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 9 1/29/2020 9:17:27 AM1/29/2020 9:17:27 AM

10
BRITAX Child Safety, Inc.
Installation in Harness Mode
Lap-Shoulder Belt with CLICKTIGHT (Preferred Method)
Before you begin:
• Check that your vehicle has a top tether anchor�
The top tether must be used at all times when
installing the child seat in harness mode� Using the
top tether will improve the stability of your child seat
and reduce the risk of injury� Check your vehicle
owner’s manual for tether anchor locations�
• Loosen the tether and place it over the child seat
back to keep it from becoming pinned between the
child seat and vehicle seat during installation�
• Adjust the child seat to desired position and place
forward facing on the vehicle seat�
1� Release the buckle and
open the CLICKTIGHT�
a� Locate the two slots
in the CLICKTIGHT
cover�
b� Squeeze the
CLICKTIGHT release
levers�
2� Pull the vehicle belt out
and route along the green
belt path� Verify that the
belt is not twisted and then
buckle�
3� Remove slack from the lap
part (A), then shoulder part
(B) of the vehicle belt�
IMPORTANT:
Overtightening the
belt may prevent the
CLICKTIGHT from properly
securing�
4� Close the CLICKTIGHT�
A click confirms the
CLICKTIGHT is secure�
NOTE: The child seat is
secure when it cannot be
moved front-to-back or
side-to-side more than
2.5 cm (1 in.) at the belt
path. If the child seat is
not secure, repeat the
installation procedure or
use a dierent seating location.
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 10P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 10 1/29/2020 9:17:29 AM1/29/2020 9:17:29 AM

11
BRITAX Child Safety, Inc. GROW WITH YOU CLICKTIGHT / PLUS User Guide
5� Firmly press the tether
hook over a designated
vehicle tether anchor�
Remove slack�
6� Secure excess webbing
with the elastic strap�
Harness Mode: Lap-Shoulder Belt with CLICKTIGHT
9Check all connections and verify that child seat is
secure� The child seat is secure when it cannot be
moved front-to-back or side-to-side more than 2�5 cm
(1 in�) at the belt path� If the child seat is not secure,
repeat the installation procedure or use a dierent
seating location�
9Check that any excess tether webbing is contained
within your vehicle and secured in the elastic strap�
OR
OR
TIP: To ensure proper
installation of the child
seat: Route the lap and
shoulder portions of the
vehicle seat belt through
the gap/notch in the seat
shell as shown�
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 11P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 11 1/29/2020 9:17:30 AM1/29/2020 9:17:30 AM

12
BRITAX Child Safety, Inc.
LUAS with CLICKTIGHT
Before you begin:
• Check that your vehicle has lower anchors�
Use the vehicle belt (not lower connectors) for
harness mode installations with children who weigh
more than 18 kg (40 lbs)�
• Check that your vehicle has a top tether anchor�
The top tether must be used at all times when
installing the child seat� Using the top tether will
improve the stability of your child seat and reduce
the risk of injury� Check your vehicle owner’s manual
for tether anchor locations�
• Loosen the tether and place it over the child seat
back to keep it from becoming pinned between the
child seat and vehicle seat during installation�
• Adjust the child seat to desired position and place
forward facing on the vehicle seat�
1� Release the buckle and
open the CLICKTIGHT
to access the lower
connectors�
a� Locate the two slots
in the CLICKTIGHT
cover�
b� Squeeze the
CLICKTIGHT release
levers�
2� Route the lower
connector strap along
the green belt path
and firmly press the
lower connectors onto
their adjacent lower
anchors� A click confirms
attachment�
NOTE: Verify that the strap
is not twisted.
3� Pull the end of the lower
connector strap to
remove slack�
IMPORTANT:
Overtightening the
webbing may prevent
the CLICKTIGHT from
properly securing�
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 12P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 12 1/29/2020 9:17:31 AM1/29/2020 9:17:31 AM

13
BRITAX Child Safety, Inc. GROW WITH YOU CLICKTIGHT / PLUS User Guide
9Check all connections and verify that child seat is
secure�
The child seat is secure when it cannot be moved
front-to-back or side-to-side more than 2�5 cm (1 in�)
at the belt path� If the child seat is not secure, repeat
the installation procedure or use a dierent seating
location�
9Check that any excess tether webbing is contained
within your vehicle and secured in the elastic strap�
4� Close the CLICKTIGHT�
A click confirms the
CLICKTIGHT is secure�
NOTE: The child seat is
secure when it cannot be
moved front-to-back or
side-to-side more than
2.5 cm (1 in.) at the belt
path. If the child seat is
not secure, repeat the
installation procedure
or use a dierent seating
location.
5� Firmly press the tether
hook over a designated
vehicle tether anchor�
Remove slack�
6� Secure excess webbing
with the elastic strap�
Harness Mode: LUAS with CLICKTIGHT
OR
OR
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 13P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 13 1/29/2020 9:17:31 AM1/29/2020 9:17:31 AM

14
BRITAX Child Safety, Inc.
Lap Belt with CLICKTIGHT
Before you begin:
• Check that your vehicle has a seat belt that can be
locked�
Check your vehicle owner’s manual to determine
what type of vehicle belt you have and how it can
be locked for use with child seats�
• Check that your vehicle has a top tether anchor�
The top tether must be used at all times when
installing the child seat� Using the top tether will
improve the stability of your child seat and reduce
the risk of injury� Check your vehicle owner’s
manual for tether anchor locations�
• Loosen the tether and place it over the child seat
back to keep it from becoming pinned between the
child seat and vehicle seat during installation�
• Adjust the child seat to desired position and place
forward facing on the vehicle seat�
1� Release the buckle and
open the CLICKTIGHT�
a� Locate the two slots
in the CLICKTIGHT
cover�
b� Squeeze the
CLICKTIGHT release
levers�
2� Pull the vehicle belt out
and route along the
green belt path� Verify
that the belt is not
twisted and then buckle�
3� Lock and remove slack
from the vehicle belt�
IMPORTANT:
Overtightening the
belt may prevent the
CLICKTIGHT from
properly securing�
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 14P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 14 1/29/2020 9:17:32 AM1/29/2020 9:17:32 AM

15
BRITAX Child Safety, Inc. GROW WITH YOU CLICKTIGHT / PLUS User Guide
4� Close the CLICKTIGHT�
A click confirms the
CLICKTIGHT is secure�
NOTE: The child seat is
secure when it cannot be
moved front-to-back or
side-to-side more than
2.5 cm (1 in.) at the belt
path. If the child seat is
not secure, repeat the
installation procedure or
use a dierent seating
location.
5� Firmly press the tether
hook over a designated
vehicle tether anchor�
Remove slack�
6� Secure excess webbing
with the elastic strap�
Harness Mode: Lap Belt with CLICKTIGHT
9Check all connections and verify that child seat is
secure�
The child seat is secure when it cannot be moved
front-to-back or side-to-side more than 2�5 cm (1 in�)
at the belt path� If the child seat is not secure, repeat
the installation procedure or use a dierent seating
location�
9Check that any excess tether webbing is contained
within your vehicle and secured in the elastic strap�
OR
OR
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 15P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 15 1/29/2020 9:17:33 AM1/29/2020 9:17:33 AM

16
BRITAX Child Safety, Inc.
Installation in Booster Mode
LUAS with CLICKTIGHT
Before you begin:
IMPORTANT: Use lower anchors to secure the child
seat to the vehicle seat even when unoccupied, since in
a crash an unsecured child restraint system may injure
occupants� Secure your child using the vehicle’s lap-
shoulder belt system�
• Check that your vehicle has lower anchors�
• Check that your vehicle has a top tether anchor�
• Loosen the tether and place it over the back of the child
seat back to keep it from becoming pinned between
the child seat and vehicle seat during positioning�
• Adjust the child seat to the upright position and
place forward facing on the vehicle seat�
IMPORTANT: It is not necessary to use lower anchors
or tether to position this child restraint in booster mode�
To use this seat in booster mode without lower anchors,
see instructions for Securing Your Child on page 18�
1� Release the buckle and
open the CLICKTIGHT
to access the lower
connectors�
a� Locate the two slots
in the CLICKTIGHT
cover�
b� Squeeze the
CLICKTIGHT release
levers�
2� Locate the lower
connectors in the
storage compartment�
Push release buttons
to remove from storage
compartment�
3� Route the lower
connector strap along
the green belt path and
firmly press the lower
connectors onto their
adjacent lower anchors�
A click confirms
attachment�
NOTE: Verify that the strap is not twisted.
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 16P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 16 1/29/2020 9:17:34 AM1/29/2020 9:17:34 AM

17
BRITAX Child Safety, Inc. GROW WITH YOU CLICKTIGHT / PLUS User Guide
Installation in Booster Mode
LUAS with CLICKTIGHT
Before you begin:
IMPORTANT: Use lower anchors to secure the child
seat to the vehicle seat even when unoccupied, since in
a crash an unsecured child restraint system may injure
occupants� Secure your child using the vehicle’s lap-
shoulder belt system�
• Check that your vehicle has lower anchors�
• Check that your vehicle has a top tether anchor�
• Loosen the tether and place it over the back of the child
seat back to keep it from becoming pinned between
the child seat and vehicle seat during positioning�
• Adjust the child seat to the upright position and
place forward facing on the vehicle seat�
IMPORTANT: It is not necessary to use lower anchors
or tether to position this child restraint in booster mode�
To use this seat in booster mode without lower anchors,
see instructions for Securing Your Child on page 18�
1� Release the buckle and
open the CLICKTIGHT
to access the lower
connectors�
a� Locate the two slots
in the CLICKTIGHT
cover�
b� Squeeze the
CLICKTIGHT release
levers�
2� Locate the lower
connectors in the
storage compartment�
Push release buttons
to remove from storage
compartment�
3� Route the lower
connector strap along
the green belt path and
firmly press the lower
connectors onto their
adjacent lower anchors�
A click confirms
attachment�
NOTE: Verify that the strap is not twisted.
4� Pull the end of the lower
connector strap to
remove slack�
IMPORTANT:
Overtightening the
webbing may prevent
the CLICKTIGHT from
properly securing�
5� Close the CLICKTIGHT�
A click confirms the
CLICKTIGHT is secure�
6� Firmly press the tether
hook over a designated
vehicle tether anchor�
Remove slack�
7� Secure excess webbing
with the elastic strap�
OR
OR
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 17P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 17 1/29/2020 9:17:35 AM1/29/2020 9:17:35 AM

18
BRITAX Child Safety, Inc.
Securing Your Child
Harness Mode
Never route the vehicle belt over the child when using
this child seat in harness mode�
Adjust the belts provided with this child seat so they
fit snugly around your child� A snug strap should not
allow any slack� It lies in a relatively straight line without
sagging� It does not press on the child’s flesh or push
the child’s body into an unnatural position�
Adjust the harness to fit the clothes the child is wearing�
Remove bulky coats and/or jackets before putting the
child in the child seat�
Verify that the child seat is secure and the harness is
properly adjusted around the child each time the child
seat is used�
Before you begin:
Always check the seat area for debris and remove
it to prevent interference with the harness adjuster
mechanism or CLICKTIGHT�
1� Loosen the harness�
a� Press the release
lever�
b� Pull both harness
straps forward�
2� Open the chest clip�
a� Press tabs�
b� Pull apart�
3� Release the buckle
and place the harness
straps around the
armrests�
WARNING!
P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 18P12378900_USER GUIDE_GROW WITH YOU CT_CT PLUS - CAN.indb 18 1/29/2020 9:17:36 AM1/29/2020 9:17:36 AM