Britton Hoxton HOX.005CP User manual

INSTALLATION
INSTRUCTIONS
Important
A
1 - 3
● We recommend that this product is installed by a qualified professional contractor. Such as a plumber who is certified by NVQ
(National Vocational Qualification) or SNVQ (Scottish National Vocational Qualification) Level 3.
● Please check this product immediately to ensure that it has not been damaged and is complete. Before installation, please make
sure this product is the correct model and you have all the parts required for installation and using.
● Please read these instructions carefully and keep it for future reference
HOX.006CP/ HOX.006MB/ HOX.006BB
Dimension
Hoxton Shower Mixer without Diverter Chrome /
Matt Black/ Brushed Brass
Hoxton Shower Mixer with Diverter Chrome /
Matt Black/ Brushed Brass
HOX.005CP/ HOX.005MB/ HOX.005BB
HOX.005 CP/MB/BB HOX.006 CP/MB/BB
215mm
73mm
46mm
48mm
7mm
10mm
3mm
120mm 120mm
215mm
93mm
46mm
7mm
38mm
3mm
10mm
48mm

Figure 1
Installation of HOX.005 trim sets (needs to be used with HOX.005V)
HOX.005V parts included
BACK PLATE
O-RING
RETAINING
SLEEVE
HANDLE
HOX.005CP/MB/BB parts included
IMPORTANT:
For valve body installation, please refer to instructions included with HOX.005V.
● Parts should be assembled in sequence illustrated by Figure 1.
● Lock the retaining sleeve to the valve body.
● Apply a narrow layer of silicone sealant around the retaining sleeve and carefully press in place.
● Install O-ring into holes of the back plate and slide the back plate onto the retaining sleeve. (O-ring should be applied
with soapy water or plumber grade grease for easy assembly.)
● Assemble the handles, the plastic ring included in HOX.005V must be placed between the sleeve and the handle.
A
2 - 3
For HOX.005 trim sets, please follow below steps to install:
BACK PLATE
O-RING
RETAINING
SLEEVE
HANDLE
PLASTIC RING
PLASTIC RING
● Apply a narrow bead of silicone sealant around the back edge of the back plate and carefully press into position.

PLASTIC RING
HANDLE
BACK PLATE
O-RING
RETAINING SLEEVE
HOX.006CP/MB/BB parts included
Installation of HOX.006 trim sets (needs to be used with HOX.006V)
HOX.006V parts included
IMPORTANT:
For valve body installation, please refer to instructions included with HOX.006V.
For HOX.006 trim sets, please follow below steps to install:
● Lock the retaining sleeve to the valve body.
● Apply a narrow layer of silicone sealant around the retaining sleeve and carefully press in place.
● Install O-ring into holes of the back plate and slide the back plate onto the retaining sleeve. (O-ring should be applied
with soapy water or plumber grade grease for easy assembly.)
● Assemble the handles, the plastic ring included in HOX.006V must be placed between the sleeve and the handle.
● Parts should be assembled in sequence illustrated by Figure 2.
Maintenance
We do NOT recommend you use any household cleaners to clean the product because these cleaners change substance
or formula too frequently. The product should be always cleaned only with soapy water and rinsed with clean water and
dried with a soft cloth.
HANDLE
BACK PLATE
O-RING
RETAINING SLEEVE
PLASTIC RING
Figure 2
A
3 - 3
● Apply a narrow bead of silicone sealant around the back edge of the back plate and carefully press into position.