Broadrack EC 17 User manual

EC 17 / 19
Cost Effective Single Rail LCD Console
Install Keyboard Instruction
Rev 1.0

EC 17 / 19 Install Keyboard Instruction
1
Notes:
1. Please check all peripherals according the list before installation. To make sure
that the whole unit was not damaged and lost during shipping process. If you
encounter any problem, please contact your dealer.
2. Before install, make sure all devices have been turned off.
3. Reliable grounding of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to
the branch circuit.
Hardware kits contents:
1. Keyboard x 1
2. Mylar x 2
Upper: 420 x 25 x 0.5 mm
Lower: 420 x 31.5 x 0.5 mm
Install keyboard steps:
1. Unscrew two screws and take HUB’s cover out.

EC 17 / 19 Install Keyboard Instruction
2
2. Install keyboard and connect USB connector.
3. Install six screws around keyboard. Then stick two Mylars.
4. Install two screws to combine HUB’s cover for finish install.