Broadrack KDR Series User manual

KDR Series
Dual Rail LCD Console with Single Port KVM
Switch User Manual
Rev 1.0

KDR Series User Manual
I
Packing List
The complete KDR-11501 / 11701 / 11901 package consist of:
One 1U 19” rack mount console
Short Single Bracket x 2
Long Assemblied Bracket x 2
Support Bracket x 2
Metal Plate x 2 (For short single bracket)
Copper Ring x 4 (For short single bracket)
Flat Screw x 4 (For short single bracket)
Cap Screw x 28
Key x 2
One 1.8M signal cable
One power cord
One user manual CD
One quick installation guide
Check to make sure that the unit wasnot damaged in shipping. If you encountera
problem, contact your dealer.
Please read this manual thoroughly, and follow the installation and operation
procedures carefully to prevent any damage to the product, and/or any of the devices
that connect to it.

KDR Series User Manual
II
Safety Instructions
1. Please read thesesafetyinstructions carefully.
2. Please keep this User’s Manual for later reference.
3. Please disconnect this equipment from AC outlet before cleaning. Don’t use
liquid or sprayed detergent for cleaning. Use moisture sheet or clothe for
cleaning.
4. For pluggable equipment, the socked-outlet shall be installed near the
equipment and shall be easily accessible.
5. Please keep this equipment from humidity.
6. Lay this equipment on a reliable surface when install. A droporfall could cause
injury.
7. Do not leave this equipment in an environment unconditioned, storage
temperature above 600C, it may damage the equipment.
8. The opening on the enclosure is for air convection hence the equipment from
overheating. DO NOT COVER THE OPENING.
9. Make sure the voltage of thepower sourceconnect the equipment to the power
outlet.
10.Please keep the power cord such a way that people can not step on it. Do not
place anything over power cord. The power cord must rate for the voltage and
current marked on the product’s electrical ratings label. The voltage and current
ratingof the cord should be greater than the voltage and the current rating
marked on theproduct.
11.Allcautions and warning on the equipment should be noted.
12.If the equipment is not in use for long time, disconnect the equipment from mains
to avoid being damaged by transient over-voltage.
13.Never pour any liquid into ventilation openings; this could cause fire or electrical
shock.
14.Never open the equipment. Forsafety reason, qualified service personnel
should only open the equipment.
15.If one of the following situations arises, get the equipment checked by service
personnel.
The Power Cord or plug is damaged.
Liquid has penetrated into the equipment.
The equipment has been exposed to moisture.
The equipment has not worked well or you can not get it work according to
User’s Manual.

KDR Series User Manual
III
The equipment has dropped and damaged.
If the equipment has obvious signs or breakage.

KDR Series User Manual
IV
Index of Contents
Packing List......................................................................................................... I
Safety Instructions.............................................................................................. II
Index of Contents..............................................................................................IV
1. General Information..................................................................................... 1
1.1 Overview.............................................................................................. 1
1.2 Product Specification........................................................................... 2
1.2.1 KDR-11501 Specification............................................................2
1.2.2 KDR-11701 Specification............................................................4
1.2.3 KDR-11901 Specification............................................................6
2. Panel Controls and OSD Function............................................................... 8
2.1 Auto Tune........................................................................................... 8
2.2 Input Source....................................................................................... 9
2.3 Brightness.......................................................................................... 9
2.4 Contrast............................................................................................ 10
2.5 Color................................................................................................. 10
2.6 Position ............................................................................................ 11
2.7 Language......................................................................................... 12
2.8 Recall............................................................................................... 12
2.9 Exit................................................................................................... 13
2.10 Power Indicator................................................................................ 13
3. Installation.................................................................................................. 14
3.1 Install Console into Cabinet............................................................... 14
3.1.1 Notes ........................................................................................ 14
3.1.2 Hardware Kits Contents............................................................ 15
3.1.3 Installation Steps (KDR-11501 / 11701 / 11901)....................... 17
3.2 InstallingtheVideoCardandVideoDriver............................................. 20
3.2.1 Configuring the Display Settings............................................... 20
3.2.2 ConnectingtheConsole................................................................ 21
3.3 TurningontheConsole........................................................................ 21
3.4 Testingthe Console............................................................................ 21

KDR Series User Manual
1
1.General Information
1.1 Overview
The KVM console is an ideal solution fornetworkadministration with multiple
servers / platforms. Their 15-inch and 17-inch 19-inch large size TFT LCD color
display and ultra-low-profile compactindustrial keyboard / touchpad provide the
user-friendliest and most reliable environment for network administrators. All these
functions are integrated in a 19-inch 1U space with rugged construction design to
achieve ultra space saving and high reliability for high quality industrial network
applications.
The KVM console provide superior picture quality and state-of-the-art features
mounted in an industrial grade, rack mount console. The console forms a rugged
enclosure that protects the panel from industrial hazards and permits easy
access to panel controls.
The KVM console panels provide flicker-free color images at optimal resolutions.
The panels’ 0.264mm pixel pitch ensures crisp imageswith clear definition, even at
highresolutions. The KVM console panels are intelligent, microprocessor-based,
and have an ergonomically designed display.
The KVM console panels employ the latest in active matrix thin film transistor
(TFT) technology, providing crisp screen images and wide viewing angles.
Unlike CRT panels, LCD panels are inherently immune to the magnetic fields
commonly found on the plant floor or communications centers. LCDs are also
typically brighter than conventional CRT technology, making them ideal for the
high ambient lighting conditions found in many of today's factory environments.
On-screen menus allow for display adjustments. In addition, the panels'
Plug-n-Play+ features support Windows 95/98,NT and XP, while a universal
power supply ensures global applicability.
The KVM console panels are compatible with most analog RGB (red, green, blue)
display standards, including PS/2, optional for Sun Micro System, Apple Macintosh
Centris, Quadra,and Macintosh II family signals. The LCD panel is capable of
displaying crisp and vibrant colorgraphics with VGA, S2GA, XGA (non-interlaced),
and most Macintosh compatible color video cards.

KDR Series User Manual
2
1.2 Product Specification
1.2.1 KDR-11501 Specification
Model name
KDR-11501
Number of ports
1
Dimension
449.8 x 443.4 x 43.0 mm / 17.6 x 19.0 x 1.9 inches
Package Dimension
605 x 560 x 202 mm / 23.8 x 22.0 x 8.0 inches
Net Weight
10.5 Kg / 23.1 lbs
Gross Weight
15.5 Kg / 34.2 lbs
Display Size
15 inches
Panel Type
Active Matrix TFT LCD
Resolution Capabilities
Maximum Resolution up to 1024 x 768 (XGA)
Pixel Pitch
Supports 0.297 mm x 0.297 mm
Viewing Angle (CR>10)
Right-Left View 130°(Typ)
Up-Down View 100°(Typ)
Contrast Ratio
550:1
Brightness
White 250 cd/m²(Center 1 point Typ)
Back Light
Dual Lamps for Back Light
Supported Colors
16M Colors (6-bit with FRC)
Response Time
Rising Time 2 ms , Decay Time 6 ms
Operating System
Dos, Unix, Linux, OSX, Windows ( XP, 7, 8, Server 2012 R2)
Connectors
PC Port / Daisy Chain Connectors
1 x VGA HDDB 15-pin
2 x PS/2 Mini Din 6-pin
Power Connector
1 x AC Inlet
Signal Cable
KC-0303
Keyboard Mouse
106 key PS/2 keyboard with touch pad
Sync
45 ~ 80 KHz
Power Source
100 ~ 240 VAC input
Power Consumption
10.12W for Panel
Temperature
Operate 0 ~ 50°C / 32 ~ 122°F
Storage -20 ~ 60°C / -4 ~ 140°F
Humidity
10% ~ 90% RH
Chassis Construction
Heavy duty steel materials
Keyboard Language
US, UK, German, French, Spanish, Italian, Portuguese, Dutch,
Swiss, Belgium, Swedish, Hebrew, Norwegian, Danish, Japanese,
Mandarin, Russian, Arabic
Certification
CE / FCC, UL / CUL / C-Tick
Table 1-1. KDR-11501 Specification

KDR Series User Manual
3
Figure 1-1. KDR-11501 Dimension

KDR Series User Manual
4
1.2.2 KDR-11701 Specification
Model name
KDR-11701
Number of ports
1
Dimension
447.3 x 481.9 x 43.0 mm / 17.6 x 19.0 x 1.7 inches
Package Dimension
605 x 560 x 202 mm / 23.8 x 22.0 x 8.0 inches
Net Weight
12.0 Kg / 26.5 lbs
Gross Weight
17.0 Kg / 37.5 lbs
Display Size
17 inches
Panel Type
Active Matrix TFT LCD
Resolution Capabilities
Maximum Resolution up to 1280 x 1024 (SXGA)
Pixel Pitch
Supports 0.264 mm x 0.264 mm
Viewing Angle (CR>10)
Right-Left View 170°(Typ)
Up-Down View 160°(Typ)
Contrast Ratio
1000:1
Brightness
White 250 cd/m²(Center 1 point Typ)
Back Light
Dual Lamps for Back Light
Supported Colors
16.7M Colors (6-bit with FRC)
Response Time
Rising Time 3.8ms , Decay Time 1.2 ms
Operating System
Dos, Unix, Linux, OSX, Windows ( XP, 7, 8, Server 2012 R2)
Connectors
PC Port / Daisy Chain Connectors
1 x VGA HDDB 15-pin
2 x PS/2 Mini Din 6-pin
Power Connector
1 x AC Inlet
Signal Cable
KC-0303
Keyboard Mouse
106 key PS/2 keyboard with touch pad
Sync
45 ~ 80 KHz
Power Source
100 ~ 240 VAC input
Power Consumption
9.91W for Panel
Temperature
Operate 0 ~ 50°C / 32 ~ 122°F
Storage -20 ~ 60°C / -4 ~ 140°F
Humidity
10% ~ 90% RH
Chassis Construction
Heavy duty steel materials
Keyboard Language
US, UK, German, French, Spanish, Italian, Portuguese, Dutch,
Swiss, Belgium, Swedish, Hebrew, Norwegian, Danish, Japanese,
Mandarin, Russian, Arabic
Certification
CE / FCC, UL / CUL / C-Tick
Table 1-2. KDR-11701 Specification

KDR Series User Manual
5
Figure 1-2. KDR-11701 Dimension

KDR Series User Manual
6
1.2.3 KDR-11901 Specification
Model name
KDR-11901
Number of ports
1
Dimension
508.8 x 481.9 x 44.0 mm / 20.0 x 19.0 x 1.7 inches
Package Dimension
664 x 564 x 185 mm / 26.1 x 22.2 x 7.3 inches
Net Weight
12.5 Kg / 27.6 lbs
Gross Weight
19.0 Kg / 41.9 lbs
Display Size
19 inches
Panel Type
Active Matrix TFT LCD
Resolution Capabilities
Maximum Resolution up to 1280 x 1024 (SXGA)
Pixel Pitch
Supports 0.098 mm x 0.294 mm
Viewing Angle (CR>10)
Right-Left View 170°(Typ)
Up-Down View 160°(Typ)
Contrast Ratio
1000:1
Brightness
White 250 cd/m²(Center 1 point Typ)
Back Light
Dual Lamps for Back Light
Supported Colors
16.7M Colors (6-bit with FRC)
Response Time
Rising Time 3.6 ms , Decay Time 1.4 ms
Operating System
Dos, Unix, Linux, OSX, Windows ( XP, 7, 8, Server 2012 R2)
Connectors
PC Port / Daisy Chain Connectors
1 x VGA HDDB 15-pin
2 x PS/2 Mini Din 6-pin
Power Connector
1 x AC Inlet
Signal Cable
KC-0303
Keyboard Mouse
106 key PS/2 keyboard with touch pad
Sync
45 ~ 80 KHz
Power Source
100 ~ 240 VAC input
Power Consumption
11.03W for Panel
Temperature
Operate 0 ~ 50°C / 32 ~ 122°F
Storage -20 ~ 60°C / -4 ~ 140°F
Humidity
10% ~ 90% RH
Chassis Construction
Heavy duty steel materials
Keyboard Language
US, UK, German, French, Spanish, Italian, Portuguese, Dutch,
Swiss, Belgium, Swedish, Hebrew, Norwegian, Danish, Japanese,
Mandarin, Russian, Arabic
Certification
CE / FCC, UL / CUL / C-Tick
Table 1-3. KDR-11901 Specification

KDR Series User Manual
7
Figure 1-3. KDR-11901 Dimension

KDR Series User Manual
8
2.Panel Controls and OSD Function
Table 2-1. Panel Controls
Figure 2-1. KDR-11501/ 11701 OSD Control Bar
Figure 2-2. KDR-11901 OSD Control Bar
2.1 Auto Tune
Press the “auto tune” button. The panel will adjust the display size
automatically and also tune the panel to its best condition.
Controls
Description
Soft power on/off button. Adjacent LED is lit when
on.
Auto
Auto-synchronize and scale down display to any
valid factory preset timings.
Up
Press to scroll the function you want to adjust.
Down
Press to scroll the function you want to adjust.
Menu
To access the main menu. This button also acts as
the “Enter” button.

KDR Series User Manual
9
2.2 Input Source
1. Press the “menu” button.
2. Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
3. Press the“menu”button to enter,and you will see:
VGA / DVI
4. Use the “Down” and “Up” button to select the input source of signal.
5. Press the “menu” button to enter
2.3 Brightness
1. Press the “menu” button.
2. Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
3. Press the“menu”button to enter.
4. Use the“Down”and“Up”button to adjust the brightness of the display.
5. Press the “menu” button to enter.

KDR Series User Manual
10
2.4 Contrast
1.Press the “menu” button.
2.Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
1.Press the “menu” button to enter.
2.Use the “Down” and “Up” button to adjust the contrast of the display.
3.Press the “menu” button to enter.
2.5 Color
1.Press the “menu” button.
2.Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit

KDR Series User Manual
11
3.Press the “menu” button to enter. And you will see:
Icon
Description
9300°K
To set CIE coordinates at 9300°K color
7500°K
To set CIE coordinates at 7500°K color
6500°K
To set CIE coordinates at 6500°K color
User
To set user defined CIE
Auto color
To auto adjust color
Return
To exit and return to the previous page
Table 2-2. Icon Description
4.Use the “Down” and “Up” button to adjust the color of the display.
5.Press “menu” to enter.
2.6 Position
1.Press the “menu” button.
2.Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
3.Press the “menu” button to enter. And you will see:
Icon
Description
Image Pos
To adjust the position of the image.
OSD Pos
To adjust the position of the OSD.
Return
To exit and return to the previous page
Table 2-3. Icon Description

KDR Series User Manual
12
4.Use the “Down” and “Up” button to scroll.
5.Press the “menu” button to enter.
2.7 Language
1.Press the “menu” button.
2.Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall
Exit
3.Press the “menu” button to enter. And you will see:
English
German
French
Italian
Spanish
4.Use the “Down” and “Up” button to scroll.
5.Press the “menu” button to enter.
2.8 Recall
1.Press the “menu” button.
2.Use the “Down” and “Up” button to scroll.
Auto tune.
Input Source
Brightness
Contrast
Color
Position
Language
Recall

KDR Series User Manual
13
Exit
3.Press the “menu” button to enter, and you will see:
Yes/ No
4.Select “Yes” button then ‘Menu” button to recall the factory setting.
Select “No “ to return to the previous page.
2.9 Exit
Press the “exit” button to quit OSD menu.
2.10 Power Indicator
GREEN ON
RED STANDBY
RED SUSPEND
RED OFF
OSD –On Screen Display

KDR Series User Manual
14
3. Installation
3.1 Install Console into Cabinet
3.1.1 Notes
1. Please check all peripherals according the list before installation.To make
sure that the whole unit was not damaged and lost during shipping process.If
you encounter any problem,please contact your dealer.
2. Before installation,make sure all peripherals and computers have been
turned off.
3. This product required front and rear mounting brackets. Pre-configure the
deep of the rack to find the best rear bracket kits for your usage.
4. The standard rear bracket kits are for 420~830 mm - KDR-11501 / 11701
(480~895 mm - KDR-11901) as below figure,contact your dealer if you need
more longer rear bracket.
5. Reliable grounding of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to
the branch circuit.

KDR Series User Manual
15
3.1.2 Hardware Kits Contents
Packing contents (KDR-11501 / 11701 / 11901):
1. Short Single Bracket x 2
2. Long Assembled Bracket x 2
3Support Bracket x 2
4Metal Plate x 2 (For short single bracket)
5Copper Ring x 4 (For short single bracket)
6Flat Screw x 4 (For short single bracket)
7Cap Screw x 28
8Key x 2