Broil King BSACT-26-1 User manual

R
fi fi

12.
R
Side Panel (3B Right)
Side Panel (3A Left)
M4x8 Flat Head Screws 5 pcs
M4x10 Screw 4 pcs + M4 Hex Nut 4 pcs
BR0036
BR0037
BR0038
BR0039
BR0040
BR0041
BR0042
BR0043
BR0044
BR0045
BR0046
BR0047

R
R
fl
Locking Caster #1 using 4 pcs M5x12 screw
and 4 pcs M5 flat washer on each.
x
h
fl
x12 screw
M5x12 screw and 3pcs M5 flat washer to be
Attach Bottom Back Panel #4 to the Side
Panels (#3A & #3B) by using 6 pcs M5x12
screw and 6 pcs M5 flat washer and then to
the Bottom Panel #2 by using 3 pcs M5x12
screw and 3 pcs M5 flat washer.

fl
R&
Attach Step Panel #6 to the Bottom Panel #2
by using 2 pcs M5x12 screw and 2 pcs M5
flat washer, and then to use 2 pcs M5x12 screw
and 2pcs M5 flat washer to be attached with
Left Side Panel #3A
Attach the Tank Bracket with Ring #7
4 pcs M5x12 screw and 4 pcs M5 flat washer to
using 8 pcs M5x12 screw and 8 pcs M5 flat
washer, and then to use another 3 pcs M5x12

Attach two Door Handles #8 to the assembled
Door Unit 39 by using 4 pcs M4x8 screw and
4 pcs M4 flat washer
Attach 4 pcs Side Shelf Brackets #10 to the
Right and Left Side Panels #3A & #3B by
using 16 pcs M5x12 Countersunk Head Screw,
and then attach a Side Shelf #11 to each Side
Panel.

barbeque head with 2 pcs M5x12 screw
fi
The mounting holes in the Bottom Back Panel
#4 are for mounting the transformer. (These
holes are only for the BBQ head with lights.)
The larger round holes in the Upper and Bottom
Back Panel #4 & #5 are for the gas hose and
the transformer wire.
Some adjustments may be needed to properly
position and level the cart. Make sure to tighten
all screws with a screwdriver.