Brother FAX-2840 Assembly instructions

Advanced User’s Guide
FAX-2840
FAX-2950
MFC-7240
MFC-7290
Not all models are available in all countries.
Version 0
ARL/ASA/NZ

i
User’s Guides and where do I find them?
Download optional software from the Brother
Solutions Center (FAX-2840 users only)
You can download a printer driver for free from the Brother Solutions Center, enabling you to use
your Brother Fax machine as a printer. Visit us at http://solutions.brother.com/.
Which Guide? What’s in it? Where is it?
Product Safety Guide Read this Guide first. Please read the
Safety Instructions before you set up your
machine. See this Guide for trademarks
and legal limitations.
Printed / In the Box
Quick Setup Guide Follow the instructions for setting up your
machine and installing the drivers and
software for the operating system (for
FAX-2950, MFC-7240 and MFC-7290) and
connection type you are using.
Printed / In the Box
Basic User’s Guide Learn the basic Fax, Copy and Scan (for
FAX-2950, MFC-7240 and MFC-7290)
operations and how to replace
consumables. See troubleshooting tips.
Printed / In the Box
Advanced User’s Guide Learn more advanced operations: Fax,
Copy, security features, printing reports
and performing routine maintenance.
PDF file / CD-ROM / In the Box
Software User’s Guide
(For FAX-2950,
MFC-7240 and
MFC-7290)
Follow these instructions for Printing,
Scanning, Remote Setup, PC-Fax and
using the Brother ControlCenter utility.
PDF file / CD-ROM / In the Box

ii
Table of Contents
1 General Setup 1
IMPORTANT NOTE............................................................................................... 1
Memory Storage .................................................................................................... 1
Set Daylight Saving Time ......................................................................................2
Ecology features .................................................................................................... 2
Toner Save ......................................................................................................2
Sleep mode ..................................................................................................... 2
Deep Sleep mode............................................................................................3
Toner Settings .......................................................................................................3
Toner Setting (Continue mode) ....................................................................... 3
Receiving faxes in Continue Mode .................................................................. 4
Toner End in Continue Mode...........................................................................4
LCD Contrast ......................................................................................................... 4
Mode Timer............................................................................................................ 5
Dial Prefix ..............................................................................................................5
Setting up the prefix number ........................................................................... 5
Changing the prefix number ............................................................................6
2 Security features 7
Security.................................................................................................................. 7
TX Lock
(FAX-2840 and MFC-7240)......................................................................... 7
Memory Security
(FAX-2950 and MFC-7290) ......................................................................... 8
Setting Lock..................................................................................................... 9
Restricting dialling ......................................................................................... 10
3 Sending a fax 11
Additional sending options................................................................................... 11
Sending faxes using multiple settings ........................................................... 11
Contrast ......................................................................................................... 11
Changing Fax Resolution ..............................................................................12
Additional sending operations.............................................................................. 13
Sending a fax manually ................................................................................. 13
Dual access ................................................................................................... 13
Broadcasting..................................................................................................13
Real Time Transmission................................................................................14
Overseas Mode .............................................................................................15
Delayed Fax ..................................................................................................15
Delayed batch transmission ..........................................................................15
Checking and cancelling waiting jobs............................................................ 15
Electronic cover page .................................................................................... 16
Polling overview................................................................................................... 18
Polled transmit............................................................................................... 18
4 Receiving a fax 19

iii
Remote Fax Options............................................................................................19
Fax Forwarding..............................................................................................19
Fax Storage ...................................................................................................19
Changing Remote Fax Options .....................................................................19
Remote retrieval ............................................................................................20
Remote fax commands..................................................................................23
Additional receiving operations............................................................................24
Printing a reduced incoming fax ....................................................................24
Setting the Fax Receive Stamp .....................................................................24
Receiving faxes into memory (FAX-2840 and MFC-7240) ............................24
Setting the Print Density ................................................................................25
Printing a fax from the memory .....................................................................25
Out of Paper Reception .................................................................................25
Polling overview...................................................................................................26
Polling receive ...............................................................................................26
Stop polling....................................................................................................27
5 Dialling and storing numbers 28
Telephone line services .......................................................................................28
Caller ID.........................................................................................................28
Additional dialling operations ...............................................................................29
Combining quick dial numbers ......................................................................29
Additional ways to store numbers........................................................................29
Setting up Groups for Broadcasting ..............................................................29
Changing Group numbers .............................................................................30
Deleting Group numbers ...............................................................................31
6 Printing reports 32
Fax reports...........................................................................................................32
Transmission verification report.....................................................................32
Fax Journal....................................................................................................32
Reports ................................................................................................................33
How to print a report ......................................................................................33
7 Making copies 34
Copy settings .......................................................................................................34
Stop copying..................................................................................................34
Using the Options key ...................................................................................35
Improving copy quality...................................................................................37
Sorting copies using the ADF ........................................................................37
Adjusting Contrast and Brightness ................................................................37
Enlarging or reducing the image copied ........................................................38
Making N in 1 copies (page layout) ...............................................................39
Manual Duplex (two-sided) Copying..............................................................39
A Routine maintenance 41
Cleaning the machine ..........................................................................................41
Checking the machine .........................................................................................41

iv
Checking the Page Counters.........................................................................41
Checking the remaining life of parts .............................................................. 41
Packing and shipping the machine ...................................................................... 42
B Glossary 44
C Index 48

v

1
1
1
IMPORTANT NOTE 1
Most of the illustrations in this User’s
Guide show the FAX-2840.
Memory Storage 1
Your menu settings are stored permanently,
and in the event of a power failure will not be
lost. Temporary settings (for example,
Contrast and Overseas Mode) will be lost.
(For FAX-2950 and MFC-7290)
During a power failure the machine will retain
the date and time and programmed fax timer
jobs (e.g. Delayed Fax) for approximately 60
hours. Other fax jobs in the machine’s
memory will not be lost.
(For FAX-2840 and MFC-7240)
During a power failure the machine will retain
the date and time for approximately 2 hours.
The fax jobs in the machine’s memory will be
lost.
General Setup 1

Chapter 1
2
Set Daylight Saving
Time 1
You can set the machine to change for
Daylight Saving Time. If you choose On, it will
reset the time forward one hour, and if you
choose Off, it will reset the time backward
one hour.
aPress Menu, 0, 2, 2.
bPress aor bto choose On or Off.
Press OK.
cPress 1or 2to choose 1.Change or
2.Exit.
dPress Stop/Exit.
Ecology features 1
Toner Save 1
You can save toner using this feature. When
you set Toner Save to On, prints appear
lighter. The default setting is Off.
aPress Menu, 1, 4, 1.
bPress aor bto choose On or Off.
Press OK.
cPress Stop/Exit.
Note
We do not recommend Toner Save for
printing Photos or Greyscale images.
Sleep mode 1
The Sleep Time setting can reduce power
consumption. When the machine is in Sleep
mode (Power Save mode) it acts as though it
were turned off. Receiving data or starting an
operation wakes the machine up from Sleep
mode to Ready mode.
You can choose how long the machine must
be idle before it goes into sleep mode. When
the machine receives a fax, computer data or
makes a copy, the timer will be reset. The
default setting is 3 minutes.
While the machine is in sleep mode the LCD
will show Sleep.
aPress Menu, 1, 4, 2.
bEnter the length of time the machine is
idle before entering sleep mode.
Press OK.
cPress Stop/Exit.

General Setup
3
1
Deep Sleep mode 1
If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
the machine will automatically enter Deep
Sleep mode, and the LCD will show Deep
Sleep. Deep Sleep mode uses less power
than Sleep mode. The machine will wake up
and start warming up when the machine
receives computer data or when you press a
key on the control panel.
Lifting the handset will also wake up the
machine from Deep Sleep mode.
Toner Settings 1
Toner Setting (Continue
mode) 1
You can set the machine to continue printing
after the LCD shows Replace Toner.
The machine will continue printing until the
LCD shows Toner Ended.
The default setting is Stop.
aPress Menu, 1, 7.
bPress aor bto choose Continue or
Stop.
Press OK.
cPress Stop/Exit.
Note
• If you continue printing in the Continue
mode, we cannot guarantee the print
quality.
• While using Continue mode the print may
appear faint.
• After replacing the toner cartridge with a
new one, the Continue mode will go back
to the default setting (Stop).

Chapter 1
4
Receiving faxes in Continue
Mode 1
The machine can store received faxes in the
memory if you choose Continue mode when
the LCD shows Replace Toner. When
received faxes are printed in Continue mode
the LCD will ask if the print quality of the fax
is OK. If the quality is not good, choose
2.No. The machine will keep the faxes
stored in the memory so you can reprint them
after you replace the toner cartridge with a
new one. If the print quality is good, choose
1.Yes. The LCD will ask if you want to
delete the printed faxes from the memory. If
you choose not to delete them, you will be
asked again after you replace the toner
cartridge with a new one.
Note
• The FAX-2840 and MFC-7240 can store
up to 400 faxes in memory and the FAX-
2950 and MFC-7290 can store up to 500
faxes in memory.
• (FAX-2840 and MFC-7240)
If you turn off the power switch faxes
stored in memory will be lost.
• The machine will keep faxes stored in
Continue Mode even if you change the
Continue setting to Stop.
• If you install a new toner cartridge when
the LCD shows Toner Ended, the
machine will ask if you want to print the
stored faxes. Choose 1.Print to print
stored faxes.
Toner End in Continue Mode 1
When the LCD shows Toner Ended the
machine will stop printing. If the memory is full
and you want to continue receiving faxes, you
must install a new toner cartridge.
LCD Contrast 1
You can change the contrast to make the
LCD look lighter or darker.
aPress Menu, 1, 5.
bPress cto make the LCD darker. Or,
press dto make the LCD lighter.
Press OK.
cPress Stop/Exit.

General Setup
5
1
Mode Timer 1
The machine has two or three mode keys on
the control panel: FAX, SCAN (for FAX-2950,
MFC-7240 and MFC-7290) and COPY.
You can set how much time the machine
takes after the last Copy or Scan operation to
return to FAX mode default. If you choose
Off, the machine will stay in the mode you
used last.
FAX-2950, MFC-7240 and MFC-7290 1
FAX-2840 1
aPress Menu, 1, 1.
General Setup
1.Mode Timer
bPress aor bto choose 0 Sec, 30
Secs, 1 Min, 2 Mins, 5 Mins or Off.
Press OK.
cPress Stop/Exit.
Dial Prefix 1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
Setting up the prefix number 1
aPress Menu, 0, 6.
(For New Zealand) Press Menu, 0, 5.
bEnter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
Note
• You can use the numbers 0 to 9, #, l
and !. (Press Hook/Hold to display “!”.)
You cannot use ! with any other numbers
or characters.
If your telephone system requires a timed
break recall (hookflash), press Hook/Hold
to enter the break.
• (Not available in New Zealand) If the pulse
dialing mode is on, # and lare not
available to use.
cPress Stop/Exit.

Chapter 1
6
Changing the prefix number 1
aPress Menu, 0, 6.
(For New Zealand) Press Menu, 0, 5.
bDo one of the following:
To change the prefix number,
press 1.
To exit without making a change,
press 2. Go to step d.
cEnter a new prefix number using the dial
pad (up to 5 digits), press OK.
dPress Stop/Exit.

7
2
2
Security 2
You can set up your machine with multiple
levels of security using TX Lock (for FAX-
2840 and MFC-7240), Memory Security (for
FAX-2950 and MFC-7290) and Setting Lock.
TX Lock
(FAX-2840 and MFC-7240) 2
Note
(For FAX-2840)
You can download the printer driver from
the Brother Solutions Center at
http://solutions.brother.com/.
TX Lock lets you prevent unauthorized
access to the machine. You will not be able to
continue to schedule Delayed Faxes or
Polling jobs. However, any prescheduled
Delayed Faxes will be sent even if you turn on
TX Lock, so they will not be lost.
While TX Lock is on, the following operations
are available:
Receiving telephone calls
Receiving faxes
Fax Forwarding
(if Fax Forwarding was already on)
Remote Retrieval
(if Fax Storage was already on)
PC Fax Receive (MFC-7240 only)
(if PC Fax Receive was already on)
While TX Lock is on, the following operations
are NOT available:
Making telephone calls using the
machine’s handset
Sending faxes
Copying
PC printing (MFC-7240 only)
Scanning (MFC-7240 only)
Note
• To print the faxes in memory, turn off TX
Lock.
• If you forget the TX Lock password,
please call Brother Customer Service or
your local Brother dealer.
Setting up the password 2
Note
If you have already set the password, you will
not need to set it again.
aPress Menu, 1, 6, 1.
bEnter a four-digit number for the
password using numbers 0-9.
Press OK.
cIf you are entering the password for the
first time, the LCD will show Verify:.
dRe-enter the password.
Press OK.
ePress Stop/Exit.
Changing the TX Lock password
aPress Menu, 1, 6, 1.
bPress aor bto choose Set Password.
Press OK.
cEnter the registered four-digit password.
Press OK.
dEnter a four-digit number for the new
password.
Press OK.
eIf the LCD shows Verify:, re-enter the
new password.
Press OK.
Security features 2

Chapter 2
8
fPress Stop/Exit.
Turning TX Lock on/off 2
If you enter the wrong Password, the LCD
shows Wrong Password and stays offline.
The machine will stay in TX Lock Mode until
the registered password is entered.
Turning TX Lock on 2
aPress Menu, 1, 6, 1.
bPress aor bto choose Set TX Lock.
Press OK.
cEnter the registered four-digit password.
Press OK.
The machine goes offline and the LCD
shows TX Lock Mode.
Turning TX Lock off 2
aPress Menu.
Enter the registered four-digit password.
bPress OK.
TX Lock is automatically turned off.
Memory Security
(FAX-2950 and MFC-7290) 2
Memory Security lets you prevent
unauthorized access to the machine. You will
not be able to continue to schedule Delayed
Faxes or Polling jobs. However, any pre-
scheduled Delayed Faxes will be sent even if
you turn on Memory Security, so they will not
be lost.
While Memory Security is on, the following
operations are available:
Receiving faxes into memory (limited by
memory capacity)
FAX Forwarding (if Fax Forwarding was
already on)
Remote Retrieval (if Fax Storage was
already on)
While Memory Security is on, the following
operations are NOT available:
Printing received faxes
Sending faxes
Receiving telephone calls using the
machine’s handset
Making telephone calls using the
machine’s handset
Copying
Scanning
PC printing
PC Fax Receive
Operation from control panel
Note
To print the faxes in memory, turn off
Memory Security.
Setting up the password 2
Note
• If you have already set the password, you
will not need to set it again.
• If you forget the Memory Security
password, please call Brother Customer
Service or your local Brother dealer.
aPress Menu, 1, 6, 1.
bEnter a four-digit number for the
password using numbers 0-9.
Press OK.
cRe-enter the password when the LCD
shows Verify:.
Press OK.
dPress Stop/Exit.
Changing your memory security
password 2
aPress Menu, 1, 6, 1.

Security features
9
2
bPress aor bto choose Set Password.
Press OK.
cEnter the registered four-digit password.
Press OK.
dEnter a four-digit number for the new
password.
Press OK.
eIf the LCD shows Verify:, re-enter the
new password.
Press OK.
fPress Stop/Exit.
Turning memory security on 2
aPress Menu, 1, 6, 1.
bPress aor bto choose Set Security.
Press OK.
cEnter the registered four-digit password.
Press OK.
The machine goes offline and the LCD
shows Secure Mode.
Turning memory security off 2
aPress Menu.
bEnter the registered four-digit password.
Press OK.
Memory Security is automatically turned
off and the LCD shows the date and
time.
Setting Lock 2
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Please call your
administrator, Brother Customer Service or
your local Brother dealer.
While Setting Lock is On, you cannot change
the settings without a password. You can only
change the following Fax transmission
settings that are in the FAX menu.
Contrast
Fax Resolution
Delayed Fax
Real Time TX
Polled TX
Overseas Mode
(For FAX-2950, MFC-7240 and MFC-7290)
Also, machine settings cannot be changed
through the Remote Setup while Setting Lock
is On.
Setting up the password 2
aPress Menu, 1, 6, 2.
bEnter a four-digit number for the
password using numbers 0-9.
Press OK.
cRe-enter your password when the LCD
shows Verify:.
Press OK.
dPress Stop/Exit.
Changing your Setting Lock password2
aPress Menu, 1, 6, 2.
bPress aor bto choose Set Password.
Press OK.
cEnter your four-digit password.
Press OK.
dEnter a four-digit number for the new
password.
Press OK.
eRe-enter your new password when the
LCD shows Verify:.
Press OK.
fPress Stop/Exit.

Chapter 2
10
Turning Setting Lock on/off 2
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Setting Lock on
aPress Menu, 1, 6, 2.
bPress aor bto choose On.
Press OK.
cEnter your four-digit password.
Press OK.
dPress Stop/Exit.
Turning Setting Lock off
aPress Menu, 1, 6, 2.
bEnter your four-digit password.
Press OK twice.
cPress Stop/Exit.
Restricting dialling 2
This feature is to prevent users from sending
a fax or call to a wrong number by mistake.
You can set the machine to restrict dialling by
using the dial pad, One Touch and Speed
Dial.
If you choose Off, the machine does not
restrict the dialling method.
If you choose Enter # twice, the machine
will prompt you to re-enter the number, and
then if you re-enter the same number
correctly, the machine will start dialling. If you
re-enter the wrong number, the LCD will
show an error message.
If you choose On, the machine will restrict all
fax sending and outbound calls for that
dialling method.
Dial pad restriction 2
aPress Menu, 2, 6, 1.
bPress aor bto choose Off, Enter #
twice or On.
Press OK.
cPress Stop/Exit.
One Touch restriction 2
aPress Menu, 2, 6, 2.
bPress aor bto choose Off, Enter #
twice or On.
Press OK.
cPress Stop/Exit.
Speed Dial restriction 2
aPress Menu, 2, 6, 3.
bPress aor bto choose Off, Enter #
twice or On.
Press OK.
cPress Stop/Exit.
Note
•TheEnter # twice setting will not work
if you lift a machine’s handset or press
Hook/Hold before entering the number.
• The Restricting dialling feature will not
work if you use an external handset or an
extension handset.
• The machine cannot restrict dialling when
you use the Redial/Pause button.
• If you chose On or Enter # twice, you
cannot use the Broadcasting feature and
cannot combine quick dial numbers when
dialling.

11
3
3
Additional sending
options 3
Sending faxes using multiple
settings 3
Before you send a fax, you can change any
combination of these settings: contrast,
resolution, overseas mode, delayed fax timer,
polling transmission, real time transmission
or cover page settings.
aMake sure you are in FAX mode .
After each setting is accepted, the LCD
asks if you want to enter more settings.
Next
1.Yes 2.No
bDo one of the following:
To choose more settings, press 1.
The LCD returns to the Setup Send
menu so you can choose another
setting.
If you have finished choosing
settings, press 2and go to the next
step for sending your fax.
Contrast 3
For most documents the default setting of
Auto will give the best results.
It automatically chooses the suitable contrast
for your document.
If your document is very light or dark,
changing the contrast may improve the
quality of the fax.
Use Dark to make the faxed document
lighter.
Use Light to make the faxed document
darker.
aMake sure you are in FAX mode .
bLoad your document.
cPress Menu, 2, 2, 1.
dPress aor bto choose Auto, Light or
Dark.
Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting if you choose Photo as the Fax
Resolution.
Sending a fax 3

Chapter 3
12
Changing Fax Resolution 3
The quality of a fax can be improved by
changing the Fax Resolution. Resolution can
be changed for the next fax or for all faxes.
To change the Fax Resolution setting
for the next fax 3
aMake sure you are in FAX mode .
bLoad your document.
cPress Resolution, then aor bto
choose the resolution.
Press OK.
To change the default Fax Resolution
setting 3
aMake sure you are in FAX mode .
bPress Menu, 2, 2, 2.
cPress aor bto choose the resolution
you want.
Press OK.
Note
You can choose four different resolution
settings.
The time taken to send will increase when
selecting S.Fine or Photo.
fax resolution
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than Fine
resolution.
Photo Use when the document has
varying shades of grey or is a
photograph. This has the
slowest transmission time.

Sending a fax
13
3
Additional sending
operations 3
Sending a fax manually 3
Manual transmission 3
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
aMake sure you are in FAX mode .
bLoad your document.
cPress Hook/Hold or pick up the handset
of the machine and listen for a dial tone.
dDial the fax number you want to call.
eWhen you hear the fax tone, press
Start.
fPress Hook/Hold or replace the
machine’s handset.
Dual access 3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD will show the new
job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If you get an Out of Memory message
while scanning the first page of a fax,
press Stop/Exit to cancel scanning. If you
get an Out of Memory message while
scanning a subsequent page, you can
press Start to send the pages scanned so
far, or press Stop/Exit to cancel the
operation.
Broadcasting 3
Broadcasting lets you send the same fax
message to more than one fax number. You
can include Groups, One Touch, Speed Dial
numbers and up to 50 manually dialled
numbers in the same broadcast.
You can broadcast up to 272 different
numbers. This will depend on how many
Groups, access codes or credit card numbers
you have stored, and on how many delayed
or stored faxes in memory.
Before you begin the broadcast 3
One Touch and Speed Dial numbers must be
stored in the machine’s memory before they
can be used in a broadcast. (See Basic
User’s Guide: Storing One Touch Dial
numbers and Storing Speed Dial numbers.)
Group numbers must also be stored in the
machine’s memory before they can be used
in a broadcast. Group numbers include many
stored One Touch Dial and Speed Dial
numbers for easier dialling. (See Setting up
Groups for Broadcasting uu page 29.)
How to broadcast a fax 3
Note
Use (Address Book) to help you
choose numbers easily.
aMake sure you are in FAX mode .
bLoad your document.
cEnter a number.
Press OK.
You can use either a One Touch,
Speed Dial, a Group number, or a
number manually entered using the dial
pad. (See Basic User’s Guide: How to
dial.)
dRepeat step cuntil you have entered
all the fax numbers you want to
broadcast to.

Chapter 3
14
ePress Start.
After the broadcast is finished the machine
will print a broadcast report to let you know
the results.
Cancelling a Broadcast in progress 3
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
aPress Menu, 2, 7.
The LCD will display the Broadcast job
number followed by the fax number
being dialled (for example, #001
123456789) and the broadcast job
number (for example,
Broadcast#001).
bPress aor bto choose one of the
following:
Choose the fax number being
dialled, and press OK.
Choose the broadcast job number,
and press OK.
cPress 1to cancel the fax number or
Broadcast job number you chose in step
b, or press 2to exit without cancelling.
If you chose to only cancel the fax
currently being sent in step b, the
LCD will ask you if you want to
cancel the broadcast job. Press 1to
clear the whole broadcast job or 2to
exit.
dPress Stop/Exit.
Real Time Transmission 3
When you are sending a fax, the machine will
scan the documents into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On for the next fax only.
Note
• If the memory is full, the machine will send
the document in real time (even if
Real Time TX is set to Off).
•Next Fax:On or Next Fax:Off can be
selected only if a document is loaded.
Sending in real time for all faxes 3
aMake sure you are in FAX mode .
bPress Menu, 2, 2, 5.
cPress aor bto choose On.
Press OK.
Sending in real time for the next fax
only 3
aMake sure you are in FAX mode .
bPress Menu, 2, 2, 5.
cPress aor bto choose Next Fax:On.
Press OK.
Not sending in real time for the next
fax only 3
aMake sure you are in FAX mode .
bPress Menu, 2, 2, 5.