Broyhill GBO21-602-1 User manual

ASSEMBLY INSTRUCTIONS
ITEM# : GBO21-602-1
SKU# : 810493301
ASHFORD SECTIONAL SET
RIGHT ARM SOFA AND LEFT ARM SOFA
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at customerservice[email protected]t,[e-mail]
[e-mail]

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
Retain these assembly instructions for future reference.
WARNINGS:
Use the correct bolts as indicated. All bolts should be hand tighten untill the complete piece is assembled ( This will make the assembly
process much easier ). Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
Regularly check hardware and tighten if necessary.
Use the correct bolts as indicated. Do not tighten any of the bolts until the sofa is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children and pets away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Sofa is for sitting purposes only. Standing on or misuse of sofa may result in damage or injury.
Weight limit is 500 lbs ( 227.3 kg). Not intended for commercial use.
MAINTENANCE
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your sofa.
In order to prolong the life and beauty of your sofa, we recommend that it be stored in a dry and protected area during off season periods.
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on
the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery cleaner if necessary.
If washed, rinse well and hang to dry. Do not machine wash or dry.
Well recommend the use of furniture covers when not in use.
GENERAL BEST PRACTICE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:

Part No. Part Qty Image Part No. Part Qty Image
R1 Sofa Back 18Short Bolt
(M6x15mm) 8
R2 Sofa Seat Panel 19Middle Bolt
(M6x28mm) 9
R3 Armrest 110 Long Bolt
(M6x41mm) 1
R4 Back Armrest Foot
( with one threaded hole) 111 Washer 18
R5 Front Armrest Foot
( with two threaded hole) 112 Back Cushion 2
6Back Foot 113 Seat Cushion 1
7Front Foot 1
Tools
PARTS LIST FOR RIGHT ARM SOFA:
R1
R2
R3
R4
R5

PRODUCT FRAME MAP
R1
7
6
R5
R2
R4
R3

STEP 1
PART REQUIRED: R3, R4 & R5
Keep the bolts loose.
Note: After assembled, keep all the
threaded holes inwards.
STEP 2
PART REQUIRED: R1, R2, 6 & 7
Keep the bolts loose.
STEP 1
STEP 2
X4 X4
X6
8
8
11
X10
R4 R5
R3
X4
11
6
911
R1
8
R2
7
11
8
11
9

PART REQUIRED: R1 & R3
Keep the bolts loose.
STEP 3
PART REQUIRED: R2, R4 & R5
Keep the bolts loose.
R2
R4
R5
STEP 4
X3 X3
11
STEP 3
X1 X1
R1
R3
9
11
11
10
11
10
9

Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
PART REQUIRED: 12 & 13
Make sure the sofa stand on the ground stable, then tighten all the bolts.
Put the cushions on the seat.
STEP 5
12 12
13

Part No. Part Qty Image
Part No.
Part Qty Image
L1 Sofa Back 18Short Bolt
(M6x15mm) 8
L2 Sofa Seat Panel 19Middle Bolt
(M6x28mm) 9
L3 Armrest 1 10 Long Bolt
(M6x41mm) 3
L4 Back Armrest Foot
( with one threaded hole) 111 Washer 18
L5 Front Armrest Foot
( with two threaded hole) 112 Back Cushion 2
6Back Foot 113 Seat Cushion 1
7Front Foot 115 U - shape
Connection Lock 2
Tools
PARTS LIST FOR
Note: There are 2 pc PART 10 long bolt to match PART 15 U - shape connection lock. No washer
is needed for this two.
LEFT ARM SOFA:
L1
L2
L3
L4
L5

PRODUCT FRAME MAP
L2
7
L5
6
L1
L4
L3

STEP 1
PART REQUIRED: L3, L4 & L5
Keep the bolts loose.
Note: After assembled, keep all the threaded
holes inwards.
STEP 3
PART REQUIRED: L1, L2, 6 & 7
Keep the bolts loose.
STEP 1
X8 X8
STEP 2
8
8
9
8
11
11
X6 X10
X4
L4
L1
L2
6
7
11
L3
L5
11
911
8