Broyhill H21GK025VB-1 User manual

ASSEMBLY INSTRUCTION
ITEM#: H21GK025VB-1-rev
SKU#: 810589089
YORKTOWN RESIN WICKER
CUSHION BENCH -BROWN WICKER
Need help? We are here for you! 1 (877) 800 – 6021 • Toll Free
[email protected] • Email Address

Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Loveseat is for sitting purposes only. Standing on or misuse of loveseat may result in damage or injury.
Not intended for commercial use. Weight limit is 500 lbs (227 kg).
Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Retain these assembly instructions for future reference
PAGE 1 OF 4
Regularly check hardware and tighten if necessary
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming
upholstery cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
We recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and
safety of your chair.
In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected
area during off season periods.
To Ensure Alignment & Easy Assembly, Secure All Bolts & Washers In Place Before Fully Tightening

PAGE 2 OF 4
500 10 20 30 40 60 70 80 90
mm 100
Tools
STEP 1
PARTS REQUIRED: 1, 2, 6, & 7
Keep the bolts loose.
x3 x3
6 7
HKVS025B-BG
HKVS025B-ZG
HKVS025B-ZSB
HKVS025B-YSB
PART
NO. MATERIAL CODE PART Q’TY
1
2
3
4
BACK ASSEMBLY
LEFT ARM
RIGHT ARM
SEAT ASSEMBLY
1
1
1
1
LS-M6-15
HKVS025B-ZM
5
BOLT M6*15
SEAT CUSHION
8
4
1
PARTS LIST
LS-M6-40
6
BOLT M6*40
7
DP-d6.5-D13
WASHER d6.5*D13*1.0
711
2
6
1
7
PART
NO. MATERIAL CODE PART Q’TY

PAGE 3 OF 4
STEP 3
PARTS REQUIRED: 1, 3, 4, 6, & 7
Tighten all bolts by using the supplied Hex key.
x4 x4
6 7
STEP 2
PARTS REQUIRED: 2, 3, 4, 5, & 7
Keep the bolts loose.
x4 x4
5 7
2
3
4
4
7
7
5
5
6
6
7
7
1
3
Note:
The labels marked “L” and “R” on the arms (#3 and #4)
should coincide with Step 2 to ensure proper assembly.
L
R

PAGE 4 OF 4
Warranty
• One–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer’s responsibility for freight and packing charges to and from the service center.
8
STEP 4
PARTS REQUIRED: 8
The store where you made your purchase does not stock parts for this item.
If you need parts, whether they are missing or damaged,
STOP!
Missing A Part? No Need To Go Back To The Store
Call us between 9:00 AM and 4:30 PM Eastern Time Monday through Friday
For further assistance, please visit us at [email protected]
Call Toll Free:
TEL: [phone]