BRS BioLock User manual

1
B
Bi io oL Lo oc ck k®
®
U Us se er rs s G Gu ui id de e
V
Ve er rs si io on n 1 1. .0 0
Bio Recognition Systems Pty Ltd
Unit 11, Building F, 16 Mars Rd, Lane Cove NSW, Australia 2066
Ph: [phone] Fax: [phone]

2
Disclaimer
BIO RECOGNITION SYSTEMS PTY LTD LICENCES THE SOFTWARE AND
DOCUMENTATION PRODUCT TO YOU, OR YOUR COMPANY, SOLELY ON AN
“AS IS” BASIS AND SOLELY IN ACCORDANCE WITH THE TERMS AND
CONDITIONS OF THE ACCOMPANYING LICENCE AGREEMENT. BIO
RECOGNITION SYSTEMS PTY LTD MAKES NO OTHER WARRANTIES
WHATSOEVER EITHER EXPRESS OR IMPLIED, REGARDING THE SOFTWARE
OR THE CONTENT OF THE DOCUMENTATION. BIO RECOGNITION SYSTEMS
PTY LTD HEREBY EXPRESSLY STATES AND YOU OR YOUR COMPANY
ACKNOWLEDGES THAT BIO RECOGNITION SYSTEMS PTY LTD DOES NOT
MAKE ANY WARRANTIES, INCLUDING, FOR EXAMPLE, WITH RESPECT TO
MERCHANTABILITY, TITLE, OR FITNESS FOR ANY PARTICULAR PURPOSE.
Trademarks
BioLock®, BioKey®are all registered trademarksof Bio Recognition Systems
Pty Ltd.
Microsoft, Windows NT and MS-DOS are registered trademarks of Microsoft
Corporation.
Copyright
Copyright © 2005Bio Recognition Systems Pty Ltd. All rights reserved.
Reproduction or transmittal of this publication, or portions of the publication,
is prohibited without the express prior and written consent of the publisher.
Photocopying and distribution within your organisation is permitted.
Patents & Technology
BioLock®is protected by numerous patents pending and design registrations
involving its technology. For further information please contact us.
Bio Recognition Systems Pty Ltd
Unit 11, Building F, 16 Mars Rd,
Lane Cove NSW, Australia 2066 AUSTRALIA.
Ph: [phone] Fax: [phone]
BioLock®Getting Started Manual.
Version 1.0
Last Updated: 14 January 2006

3
C
CO ON NT TE EN NT TS S
Disclaimer ...........................................................................................2
Trademarks.........................................................................................2
Copyright............................................................................................2
Patents & Technology ..........................................................................2
CONTENTS ......................................................................................... 3
BIO RECOGNITION SYSTEMS PTY LTD SERVICES ............................. 5
COMPANY INFORMATION .............................................................................5
CONTACT INFORMATION..............................................................................5
HARDWARE SUPPORT .................................................................................6
Warranty Support ................................................................................6
The Bio Recognition Systems Pty Ltd Web Site....................................... 6
Regulatory Compliance.........................................................................6
International Biometrics Standards Compliance ......................................7
INTRODUCTION................................................................................. 8
HARDWARE INSTALLATION............................................................... 9
INSTALLING BIOLOCK®..............................................................................9
HARDWARE PROGRAMMING ........................................................... 17
PROGRAMMING BIOLOCK®......................................................................... 17
ENTERING ADMIN MODE ........................................................................... 17
CONNECTING THE SECURE RELAY BOARD....................................................... 17
PROGRAMMING THE BIOLOCK®RELAY ON TIME.............................................. 17
TESTING THE RELAY ON-TIME DURATION ......... ERROR!BOOKMARK NOT DEFINED.
ADDING USERS ....................................................................................... 18
DELETING USERS..................................................................................... 18
DELETING ALL USERS ............................................................................... 18
VERIFYING USERS.................................................................................... 18
FACTORY DEFAULT................................................................................... 18
USING BIOLOCK .............................................................................. 19
Centering the Core ............................................................................ 20
Identification Errors ........................................................................... 20
False Acceptance ............................................................................... 20
False Rejection .................................................................................. 20
GLOSSARY........................................................................................ 23
USER COMMENTS............................................................................. 25

5
Chapter 1
B
BI IO O R RE EC CO OG GN NI IT TI IO ON N S SY YS ST TE EM MS S P PT TY Y L LT TD D S SE ER RV VI IC CE ES S
Bio Recognition Systems Pty Ltd are pleased that you have chosen ‘BioLock®’ -
our New Keyless Finger Print Unit system - to help you to run your
business/office or home more efficiently. Our aim has been to develop the
most technologically advanced BioMetric Products at realistic prices.
Company Information
Bio Recognition Systems Pty Ltd (BRS) is a Research, Development and
BioMetrics Manufacturer based in Sydney NSW Australia. Since early 2000 we
have been developing and supporting our range of BioMetric Security and
Time Management software and hardware solutions. This latest product
BioLock®is a fully embedded finger print device that incorporates all of the
features of the more expensive competitive units along with many additional
features.
Contact Information
You can contact Bio Recognition Systems (BRS) in any of the following ways:
Address Unit 11, Building F, 16 Mars Rd, Lane Cove NSW
2066 AUSTRALIA.
Phone [phone]
FAX [phone]
Email [e-mail]
[email protected]
World Wide Web http://www.brsgrp.com

6
Hardware Support
Bio Recognition Systems Pty Ltd (BRS) currently provides hardware support
between the hours of 9am and 5pm (EST), Monday through Friday.
In addition, we provide annual hardware support programs.
Warranty Support
BioLock®is warranted for a period of 12 months,within this period if the unit
becomes defective due to workmanship or failure of the electronic
components, Bio Recognition Systems Pty Ltd at its full discretion will replace,
repair or offer an alternative product. Any Bio Recognition Systems Pty Ltd
product which has any serial number labels, any logos or silk-screen printing
removed in any way from its original placement will automatically invalidate
the warranty. At no time will onsite warranty be offered unless a separate
onsite warranty agreement has been entered into and paid for by the
customer. All warranties require that the unit be return back to Bio
Recognition Systems Pty Ltd for servicing or repaired through an authorised
distributor of Bio Recognition Systems Pty Ltd. Finger Sensors, or parts that
can suffer from wear & tear are not covered under this warranty. Finger
Sensors, Power supplies and batteries supplied with Bio Recognition Systems
Pty Ltd products are warranted for 3 months only.
The Bio Recognition Systems Pty Ltd Web Site
The Bio Recognition System’s web site can be found at
http://www.brsgrp.com
Here you will find information about BioLock®and a Customer Support
section. The Customer Support section contains downloadable documents,
technical articles and product firmware updates.
Regulatory Compliance
The product has been tested and has compliance to the following standards:
a) European low voltage directive, ie. EN60950
b) European EMC directive, ie. EN50082
c) Australian New Zealand EMC requirements, AS3548. Level 2
d) US FCC Part 15J Emission Standard
e) CE
f) CISPR22

7
International Biometrics Standards Compliance
The product has been tested and has compliance to the following standards:
BioAPI Compliant (ANSI / INCITS 358-2002)
CBEFF -Common Biometric Exchange File Format Compliant (NISTIR
6529-2001)

8
Chapter 2
I
IN NT TR RO OD DU UC CT TI IO ON N
BioLock®is the new Breed of Biometric hardware that has the ability to scan a
human finger print even if the finger print is non-existent. It does this by
using technology known as non-invasive Radio Frequency scanning. It allows
the sensor to look under the skin to see the true fingerprint. The unit is a fully
functional Finger Access unit or data acquisition device for gathering data on
movement of employees.
Incorporating standard 10BaseT communications technology BioLock®
provides users the ability to run long distances including over the internet
removing distance restrictions.
BioLock can be installed outdoors as it is weather rated to IP65 which means
it can handle water jets of low to medium pressure directly without the
concerns of damage or ingress into electronic circuitry. Being weather
resistant BioLock is ideal for outdoor access control gates, bollards, parking
lots or any application requiring either a clean or dirty environment.
BioLock will also resist all dust and small particles and is rated to withstand
this ingression indefinitely.

9
Chapter 3
H
HA AR RD DW WA AR RE E I IN NS ST TA AL LL LA AT TI IO ON N
Installing BioLock®
BioLock®includes the following components:
BioLock Metal Unit
Metal Mounting Backplate
Power Supply (9V DC)
Cable assembly
CDROM
Secure I/O PCB & Enclosure ( If Security product purchased)
Screw and assembly pack
Quick Installation Guide
If any item is missing please contact the supplier who can replace missing
components.
Device LED Indicators
Power On Green Led
The Green Led indicates
power to the device
Identify Success
Enrolment Yellow Led
The Yellow Led indicates a
successful scan has taken
place, also it is used for
Enrolment assistance.
Identity Fail Red Led
The Red Led indicates a
failed scan has taken place and
Is also used for assistance with
enrolments.
Power Requirements
The BioLock Device requires power from an external power supply. The
product ships with a 9V DC Plug Pack style power supply.
Green Led
Red Led
Yellow
Led

10
STEP 1 –Location & Mounting
Find the best location for the mounting of the metal backplate – shown below.
Note it is important that the surface be flat, if it is not then it is advised to
pack out the bracket with washers or material to provide a flat base. The unit
will not seal, and the tamper switch will not sit accurately if the bracket is
twisted in any way.
Drill a large hole in the mounting location to enable passing the BioLock II
Cable (BRS-819-29) RJ45 socket through the opening.
Attach the RJ-45 socket on the cable assembly supplied to a valid CAT5
network via an CAT5 Ethernet cable.
Attach the Power + & -wires to the adaptor supplied. Terminate all wires
used and unused in the screw strips provided to eliminate shorting or failures.
The 8 Pin White connector on the cable must be passed through the 7mm
hole via the rear or back of the metal backplate closest to the wall and in
doing the grommet placed on the cable must be tightly inserted into the 7mm
hole. Leave ample cable hanging out of the hole whilst mounting so that you
can manipulate the front housing when plugging the cable in. See Diagram
below.
Attach the wall bracket to the wall or substrate surface via the use of 4
Countersunk screws. It is important that countersunk screws are used as this
will guarantee a good fit and weather protection when the screws touch the
bottom of the rebated holes when tightened.
FRONT VIEW OF METAL BRACKET
Cable pass
through hole
Front Housing screw
locking engagement
keys