Bryton Rider 210 User manual

Q
u
i
ck Start Gu
i
de
210

2
EN
Key Functions
Rider 210
Rider 210 is equipped with barometer which shows the real time
altitude. This device has three keys that are used for multiple functions.
2
LAP/OK ( )
Press and hold to turn the device on/o.•
In Menu, press to enter or conrm a•
selection.
In free cycling, press to start recording.•
When recording, press to mark the lap.•
1
BACK ( )
Press to return to the previous page or•
cancel an operation.
When recording, press to pause•
recording. Press it again to stop
recording.
3
PAGE ( )
In Menu, press to move down to scroll through menu options.•
In Meter view, press to switch meter screen page. Press and hold to enter Shortcut•
page.
Accessories
The Rider 210 comes with the following accessories:
•USBcable•Bikemount
Optional items:
•Heartratebelt•Dualsensor•Speedsensor•Cadencesensor
/
11 /11 r
p
m
321
Note: To adjust the altitude settings on Rider 210, go to Setting > Altitude > press >
press / to change altitude > press to conrm.

EN
3
Step 1: Charge your Rider 210
ConnectRider210toaPCtochargethebatteryforatleast3hours.
Unplugthedevicewhenitisfullycharged.
/
11 /11 r
p
m
reset
Icons
Icon Description Icon Description
Bike Type HeartRateSensorActive
1
Bike1 CadenceSensorActive
2
Bike2 SpeedSensorActive
GPS Signal Status DualSensorActive
No signal (not xed) Notication
Weak signal Log Record in Progress
Strong signal Recording is paused
Power Status Bluetoothfunctionis
enabled
Full battery
/ Halfbattery
Low battery
Note: Only the active icons are displayed on the screen.

4
EN
Step 2: Turn On Rider 210
Press and hold to turn on the device.
Step 3: Initial Setup
When turning Rider 210 on for the rst time, the setup wizard appears
on screen. Follow the instructions to complete setup.
1. Select the display language.
2. Select the daylight saving time.
3. Select the unit of measurement.
4. Enter your “user prole”.
The “user prole” includes the following data settings:
Gender• Height• Weight•
It is recommended to input the data. The data accuracy will highly
aect your training analysis.
5.ScantheQRcodewithyourphonetodownloadtheBrytonMobile
APP.
Note:
The Rider 210 was designed to wirelessly sync your data in the background using•
Bluetooth Smart.
For more instructions, please refer to “Share Your Records” section.•
6.ReadandaccepttheSafetyAgreement.

EN
5
Step 4: Acquire Satellite Signals
Once the Rider 210 is turned on, it will automatically search for
satellite signals. It may take 30 to 60 seconds to acquire signals.
The GPS signal icon ( / ) appears when GPS is xed.
If the GPS signal is not xed, an• icon appears on the screen.
Please avoid the obstructed environments since they might aect•
the GPS reception.
Tunnels Inside rooms,
building, or
underground
Underwater High-voltage
wires or television
towers
Constructionsites
and heavy trac
Step 5: Ride Your Bike with Rider 210
• Free ride:
Select Meter from the menu list and start free ride.
• Start an exercise and record your data:
In meter view, press to start recording, press to pause,
press again to stop.
Start a training:•
Select Train from the menu list. Training can be based on time,
distance, calories burn, or the saved workouts.

6
EN
Reset Rider 210
To reset the Rider 210, long press all three keys ( / / ) at the
same time.
Share Your Records
Whenusingthedeviceforthersttime,pleasedownloadBryton
MobileAPPandpairyourmobilephonewithRider210.
Note:
You• can also scan QR code here or go to
corp.brytonsport.com/app/sports to download Bryton APP.
a. Go to Settings > Bluetooth >
Pairing.
b.UsemobilephonetoscanQR
codetodownloadBrytonAPP.
Pairing
Next

EN
7
c.InstalltheBrytonAPP. d. Press and leave Rider 210
device with the “Waiting for
pairing”.
e.Signup/loginonBrytonAPP
Register a new account or use
yourcurrentBryton
Accounttologin.
Note: Bryton Account is
the email address that
you used to register a
member of
brytonsport.com.
f.MakesureBluetoothonmobile
phone and Rider 210 are turned
on.
g. Pairing your mobile phone with
Rider 210
Select Setting > Bluetooth >
Pairing. Once Rider 210 appears
on the list, select it to pair.
Note: The pairing
process is required
only one time.
Once completed,
your Rider 210 and
mobile phone will
remain paired.
h. Later, tap Sync with device, the
workout
records will
sync to
BrytonAPP.
Bryton mobile app
INSTALLING...
Pairing
Waiting for
Pairing
Pairing
Waiting for
Pairing

8
EN
Note:
Please go to corp.brytonsport.com > Support > Tutorial for more instructions.•
Please go to• http://corp.brytonsport.com/products/support_sdownload?lang=eng
to download User’s Manual.
Bike Mount Installation
To mount Rider 210 onto your bike, do the following:
1
2
3
210
210
4

EN
9
Accessories Installation (Optional)
Heart Rate Monitor
C
L
O
S
E
O
P
E
N
C
L
O
S
E
O
P
E
N
C
L
O
S
E
O
P
E
N
1
2
3
4
5
6
C
L
O
S
E
O
P
E
N
Speed/Cadence/Combo Sensor
CADENCESPEED
SPEED
1
2
3
4

10
EN
3
mm
Speed/CAD
Turn Off
Status: active
ID XXXXXXXXX
Rescan
Speed/CAD
Turn Off
Status: active
ID XXXXXXXXX
Rescan
5c
6c
7c
8c
SPEED
3
mm
SPEED
SPEED
SPEED
SPEED
Speed
Turn Off
Status: active
ID XXXXXXXXX
Rescan
SPEED
Speed
Turn Off
Status: active
ID XXXXXXXXX
Rescan
5a
6a
7a
8a
Cadence
Turn Off
Status: active
ID XXXXXXXXX
Rescan
5b
6b
7b
8b
Cadence
Turn Off
Status: active
ID XXXXXXXXX
Rescan
3
mm
CADENCE