BT Home monitor keypad User manual

Introduction
The BT Home Monitor Keypad acts as a wireless remote
control for your BT Home Monitor VP1000 system.
Carry with you around the home to turn your security
system on and off, or chan e settin s, at the touch of
a button. The panic button functions allow you to call for
help in an emer ency, ensurin that nominated contacts
receive alerts by telephone, text messa e and e-mail.*
You can have 2 Keypads re istered with the Control Panel.
They provide a useful way to turn your system on and off
if your Control Panel is located somewhere other than
your usual entry and exit point.
Inside The Box
• 1 Wireless Keypad (Battery Included)
• Mountin Equipment
• Installation Guide
Before You Begin
Be sure you have set up your BT Home Monitor VP1000
system accordin to the instructions shown in the main
User Guide.
Before you proceed, check that your Control Panel says
BT HOME MONITOR or READY. If it does not, please
consult the troubleshootin section of the main User Guide.
Note that only the MASTER CODE owner can add an
accessory.
Installation
To add a new Keypad, follow these instructions.
Step 1 – Insert The Battery
1. Remove the wall mountin bracket from the Keypad
by pushin downward.
2. Slide down the battery cover.
3. Insert the battery (observin polarity + and –).
4. Replace the battery cover.
Step 2 – Register The Keypad
At the Control Panel, follow these instructions:
PRESS DISPL Y
Until the display shows SYSTEM PROFILE.
Enter your MASTER CODE – if you have not
selected a personal PIN number, this will be the
default settin – 2580.
Until the display shows ADD / DEL KEYPAD 1.
Display shows 1-WAY KP NO:–
Enter the Keypad number you want e. . 1,
or press NEXT to find the next available
Keypad location.
Display shows ACTIVATE NOW.
Press the ✱button (next to 0) on the Keypad
for two seconds. You will hear a confirmation
melody.
Display shows KEYPAD NO: (number), e. . ■.
The Keypad is now re istered. Choose either:
To move to the next Keypad. Or:
Three times, then <OK> to exit and return
to READY.
Please remember to update your personal online account
with this information so that your monitorin service can
report information accurately.
BT Home Monitor Keypad VP
Installation and User Guide
BT Home Monitor Keypad VP – Edition 08 – 21.03.03
1
NEXT
SHOW / OK
NEXT
SHOW / OK
SHOW / OK
NEXT
0
HOME
Downloaded from www.ukpanels.com

Step 3 – Wall Mounting The Keypad
If you wish to mount the Keypad on a wall surface, use
these instructions.
1. Hold the bracket a ainst the wall and mark the drill
points throu h the two screw holes.
2. Drill two holes where you have marked the wall.
3. Insert the wall plu s.
4. Screw the bracket to the wall with the screws provided.
5. The Keypad slides into the bracket and the clips hold
it in place.
Step 4 – Test The Keypad
1. Stand about 3m away from the Control Panel and turn
the system ON by pressin the button.
2. Enter your User Code (if you have not selected a
personal PIN number this will be the default settin –
2580).
3. Check the Keypad LED li hts reen with each button
press. If the command is successful you will hear a
sin le beep and the LED will turn red.
4. The ON indicator li ht should appear on the Control
Panel. The panel will state aloud, “Switchin on house,
please exit now” and the exit delay beeps will be in.
5. Switch the system OFF by pressin the button.
The ON indicator li ht on the Control Panel should o
out and the display should revert to READY.
Usage
You can now use the Keypad buttons instead of the
Control Panel to switch your BT Home Monitor VP1000
on and off. The Keypad is also equipped with panic
button functions to allow people at home to send
emer ency, help and fire alerts.*
Keypad Buttons nd Functions
FUNCTION PRESS
Switch House ON Then enter USER PIN
Turns your system on fully when you want to leave your house.
Switch Home ON Then enter USER PIN
Turns on selected sensors so you have protection but can still
move around indoors. See Section 3 of the main User Guide
for more information.
Switch OFF Then enter USER PIN
Turns your system off, except for 24-hour sensors which will
continue to function.
Help larm Hold down for 2 seconds
Sends a help messa e to all your BT Home Monitor contacts.
Fire larm Hold down for 2 seconds
Sounds the internal siren and sends a fire messa e to all your
BT Home Monitorin contacts.
Emergency larm +Hold down for 2 seconds
Sounds the internal siren and sends an emer ency messa e
to all your BT Home Monitorin contacts.
Status Report
Gives a system status report at the Control Panel.
Light
This function is not operational. Reserved for future devices.
LIGHT
✱
OFF
HOME
ON
OFF
ON
BT Home Monitor Keypad VP
Installation and User Guide
BT Home Monitor Keypad VP – Edition 08 – 21.03.03
2
HOME
ON
OFF
LIGHT
2
3
1
5
6
4
8
9
7
0
#
✱
Indicator LED
Fire alarmHelp alarm
Emer ency alarm (Press to ether)
Downloaded from www.ukpanels.com

Keypad Indicator Light
COLOUR FUNCTION
Red Li hts durin transmission
mber Li hts durin pro rammin
Green Li hts upon each press of a button
Red and Green Li hts upon each press of a Help,
alternately Fire or Emer ency button
Set/Change Your User Codes
If you have not done so already, you should chan e your
User Code from the default settin – 2580. If you have
already selected new codes for your Control Panel you
will need to pro ram your Keypad with these same codes.
Please follow the instructions below:
PRESS DISPL Y
Green LED flashes slowly.
Enter the MASTER CODE – if you have
not selected a personal PIN number, this will be
the default settin – 2580.
Press 1to set/chan e a new master User Code
Or
Press a button between 2and 8to set/chan e an
additional User Code for other family members.
Enter the new 4-di it code you want.
You will hear a confirmation melody and
the Amber LED will flash slowly.
To confirm the chan e.
Using Multiple Keypads
The Keypad acts in the same way as the Control Panel,
so only User 1 is able to have full control over the system,
includin the ability to chan e the BT Home Monitor
VP1000 operational settin s. Up to 7 other users can
have limited access ri hts, such as the ability to turn the
system on and off, by assi nin individual user codes.
Deleting Keypad
You may at some point decide you do not wish to use
one or more of the Keypads.
To delete a Keypad from the Control Panel, follow these
instructions.
PRESS DISPL Y
Until the display shows SYSTEM PROFILE.
Enter the MASTER CODE – if you have
not selected a personal PIN number, this will be
the default settin – 2580.
Until the display shows ADD/DEL KEYPAD.
Display shows KEYPAD NO:–
Enter the number of the Keypad you wish
to delete, e. . 1 or press NEXT to scroll
throu h the list.
Display shows <OFF> TO DELETE.
Display shows KEYPAD NO: (number).
Choose either:
To move to the next Keypad. Or:
Three times, then <OK> to exit and return
to READY.
To test that the Keypad has successfully been deleted,
press the button, followed by your User Code, to
see whether the Control Panel responds. You may also
wish to remove the battery.
Please remember to update your personal online account
with this information so that your monitorin service can
report information accurately.
ON
#
4
1
#
BT Home Monitor Keypad VP
Installation and User Guide
BT Home Monitor Keypad VP – Edition 08 – 21.03.03
3
eg.
0
OFF
SHOW / OK
NEXT
NEXT
SHOW / OK
SHOW / OK
NEXT
0
HOME
Downloaded from www.ukpanels.com

Maintenance
Low Battery Warning
The Keypad is powered by a 3V lithium battery which
will last for up to 3 years. When the Keypad battery is
runnin low, the Control Panel will display the messa e
KEYPAD LOW BATTERY and the CHECK indicator li ht
will be illuminated.
Replacing The Battery
1. Remove the wall-mountin bracket by pushin
downward.
2. Slide down the battery cover and remove the
old battery.
3. Insert the new battery (observin polarity + and –).
4. Replace the battery cover.
Cleaning
Clean with a soft cloth or damp spon e with a mild
deter ent. Wipe dry immediately. Do not submer e in
water and do not use abrasives or solvents.
Support
For further assistance
If you need further information, please refer in the
first instance to the main BT Home Monitor VP1000
User Guide.
Alternatively, BT advisors are on hand to assist –
24 hours a day, 7 days a week.
Telephone: [phone]. Call char es will apply.
Or email: [email protected]
Important Information
Product Information
Wireless systems are reliable and tested to hi h standards.
However, due to their transmittin power and ran e,
there are some limitations to be considered:
• Receivers may be blocked by radio si nals occurrin
on or near operatin frequencies, re ardless of the
code selected.
• A receiver can only respond to one transmitted si nal
at a time.
• Wireless equipment should be tested re ularly to
determine whether there are sources of interference
and to protect a ainst faults.
Specifications
Transmitted Powercode (Help, Fire and
ID Type: Emer ency) and CodeSecure
(Switchin On and Off)
Frequency (MHz): 868.95
Battery: 3VDC Lithium Type CR123A
Current 10µA (durin standby), 95mA
Consumption: (durin transmission includin LED
and back li ht currents)
Battery Life 3 years (for typical use)
Expectancy:
Operating 0ºC – 49ºC (32ºF – 120ºF)
Temperature:
Dimensions: 127 x 70 x 24mm (5 x 23⁄4x 31/32in)
Colour: Ivory
BT Home Monitor Keypad VP
Installation and User Guide
BT Home Monitor Keypad VP – Edition 08 – 21.03.03
4
Downloaded from www.ukpanels.com

BT Guarantee
Your BT Home Monitor Keypad VP is uaranteed for a
period of 12 months from the date of purchase. Subject
to the terms listed below, the uarantee will provide for
the repair of, or at BT’s or its a ent’s discretion the
option to replace the BT Home Monitor Keypad VP, or
any component thereof, which is identified as faulty or
below standard, as a result of inferior workmanship of
materials. Products over 28 days old from the date of
purchase may be replaced with a refurbished product.
The conditions of this guarantee are:
• The uarantee shall only apply to defects that occur
within the 12 month uarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its a ent as
instructed.
• This uarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
ne lect, tamperin with the equipment, or any
attempt at adjustment or repair other than throu h
approved a ents.
• This uarantee does not affect your statutory ri hts.
Within the 12 month guarantee period:
If you experience difficulty usin the product, prior to
returnin it, please contact BT Home Monitor Support
for assistance on 0870 240 1979 – 24 hours, 7 days a
week (call char es will apply).
In the unlikely event of a defect occurrin , please follow
the helpdesk’s instructions for replacement or repair.
Outside of the 12 month guarantee period:
If your product needs repair after the uarantee period
has ended, we recommend that you call the helpdesk
for information.
Instructions for returning the product:
If the helpdesk is unable to remedy your problem they may
ask you to return the product to the ori inal point of
purchase. Where possible, pack the product in its ori inal
packa in . Please remember to include all parts. (Please
note that we cannot take responsibility for oods dama ed
in transit.) Please obtain and keep proof of postin .
Terms and Conditions
For full Terms and Conditions for BT Home Monitorin ,
please visit www.bt.com/homemonitorin
Declaration of Conformity with European
Community Directive 1999/5/EC.
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards. This equipment complies with
the essential requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
1999/5/EC.
The Declaration of Conformity for the BT Home Monitor
VP1000 is published on the website:
http://www.visonic.com/bthomemonitor
BT Home Monitor Keypad VP
Installation and User Guide
BT Home Monitor Keypad VP – Edition 08 – 21.03.03
5
* You must have an active subscription to the
BT Home Monitorin System to receive alerts.
Downloaded from www.ukpanels.com

BT Home Monitor Keypad VP
Installation and User Guide
BT Home Monitor Keypad VP – Edition 08 – 21.03.03
Offices worldwide
The telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British
Telecommunications plc’s respective standard conditions of contract.
Nothin in this publication forms any part of any contract.
© British Telecommunications plc 2003
Re istered office: 81 New ate Street, London EC1A 7AJ
Re istered in En land No: 1800000
BT Home Monitor Keypad VP (03/03) 7
Printed in Israel
Downloaded from www.ukpanels.com