BT BT-CSIS User manual

Tube Feeding Training Model
USER’S GUIDE
BT-CSIS

Product Information
Product Specifications
Customer Service
Product Name
Model Name
Manufacturer
Country of Origin
Size
Weight
Web-site
Address
Contacts
E-mail
310 x 700 x 238 ㎜
9㎏
Tube Feeding Training Model
BT-CSIS
BT Inc.
South Korea
www.btinc.co.kr
Headquarter : A-313 Samsong Techno-valley, 140, Tongil-ro,
Deogyang-gu, Goyang-si, Gyeonggi-do, 10594,
South Korea
Sales : Busan Building 5F, 27, Jeonpo-daero 92beon-gil,
Nam-gu, Busan 48404, South Korea
Headquarter : [phone]
Sales : [phone]
[email protected]

Cautions
Please read it carefully to ensure correct usage and user’s safety through understanding
of the product.
① Use only components provided or approved by BT Inc.
② Do not use the product for other purposes described in the manual.
③ If you disassemble or modify the product without any permission by BT Inc, you cannot get
the warranty. Also, making imitated or altered products for commercial purposes are prohibited
by law.
④ Keep the product away from water and moisture.
⑤ Do not keep the product near hot or cold environments as possible. Deterioration of
product or internal damage may occur by the extreme weather conditions
⑥ Never clean the product with chemicals such as solvent, benzene or thinner as these may
cause fire ignition or the surface deterioration.
⑦ BT Inc. can change or adjust the product specification without any notice in order to improve
the product.

Components
Adult torso model
※ Etc. - Storage bag, User manual
Pedestal
for semi-sitting
position
Fixing bolts
for Semi-setting
position
Injector connector
for endotracheal suction
Draining
connector
Water inlet
FunnelDraining tube Injector
for endotracheal suction
50
60
40
30
20
10

Installation
※ When install the tube feeding training model,
be sure to lock the valve of draining tube before injecting water.
50
60
40
30
20
10
Put the manikin in a supine position,
lock the valve of the draining tube and insert it into the draining connector of manikin.
Insert the injector for endotracheal suction to the connector
and open the valve of water inlet on the abdomen.
Open the water inlet valve, insert the funnel and fill it with 300cc ~ 350cc of water.
50
60
40
30
20
10

Installation
<Changing position>
<How to change the Semi-sitting position>
Supine position Sitting positionSemi-sitting position (21°~45°)
45° | 42° | 39° | 36° | 33° | 30° | 27° | 24° | 21°
Loosen and remove bolts at the top, adjust the pedestal to the angle.
45° | 42° | 39° | 36° | 33° | 30° | 27° | 24° | 21°

Functions
<Tube feeding>
※ When practicing tube feeding, be sure to open the valve of draining tube.
45° | 42° | 39° | 36° | 33° | 30° | 27° | 24° | 21°
When practicing tube feeding, set the manikin to sitting or semi-sitting position
and practice according to the way of inserting the catheter.
When injecting nutrition after inserting a catheter,
inject nutrition after open the valve of darining tube.

Functions
<Tracheostomy care / Endotracheal suction>
Practicing tracheostomy care is possible.
Please do the training after injecting artificial saliva of 20~30cc with a injector for endotracheal suction.
When practicing gastrostomy tube care or PEG care, remove the chest skin and rib part of manikin,
insert a gastrostomy tube by opening the cap of stomach, seal the skin and procee the training.
<Gastrostomy tube / PEG care>

Maintenance
50
60
40
30
20
10
50
60
40
30
20
10
After training, put the manikin in a lateral position,
drain the remaining nutrition fluid and remove the chest skin and rib part of manikin.
Separate the stomach, remove the face skin, and then separate the trachea.
Wash models in running water, wipe the surface with a dry cloth and dry it
After drying, assemble and store in reverse order.

A-313, Samsong Techno-valley, 140, Tongil-ro,
Deogyang-gu, Goyang-si, Gyeonggi-do, 10594, Republic of Korea
Hompage: www.btinc.co.kr / E-mail: [email protected]
Tel: [phone] ,[phone] / Fax: [phone]
Copyright(c) BT Inc. All rights reserved.
Tube Feeding Training Model
BT-CSIS