PASCO ME-9885A User manual

Instruction Manual
No. 012-09743A
Magnetic Bumper Set
ME-9885A
Introduction
The Magnetic Bumper Set includes a pair of strong magnetic bumpers. These bumpers are
ideal for measuring forces during elastic collisions between carts. Simply remove the hooks
on the Force Sensors and replace with the magnetic bumpers. The bumper has a metal post
which assures that it is mounted in the correct orientation.
Included Equipment Part Number
Magnetic Bumper (2) 003-09567
Additional Equipment Recommended
Force Accessory Bracket CI-6545
Force Sensors CI-6537, CI-6746 or PS-2104
PASCO carts ME-6951, ME-6950 or
ME-9454
Magnetic
Bumpers (2)

Magnetic Bumper Set Suggested Activities
2®
Suggested Activities
Elastic Collisions
1. Remove the hooks from both Force Sensors
2. Screw a Magnetic Bumper into each of the sensors, Note
the location of the alignment post on the bumpers and the
hole on the sensor face.
3. Connect the Force Sensors to PASCO carts or Force
Accessory Bracket
Limited Warranty
For a description of the product warranty, see the PASCO catalog.
Contacting Technical Support
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Web: www.pasco.com
Tech Support: [email protected]
Phone: [phone]
[phone]
Copyright Notice
The PASCO scientific 012-09743A Magnetic Bumper Set Instruction Manual
is copyrighted with all rights reserved.