BT Decor 2200 User manual

User Guide
BT Decor 2200
Offices worldwide
The services described in this publication are subject to availability and may be
modified from time to time. Services and equipment are supplied subject to
British Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of a contract.
© British Telecommunications plc 2011.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed and produced by The Art & Design Partnership Ltd.
Printed in China / Issue 1 / ADP 08-11
1 Set up
2 Go!
General information
For information on safety instructions,
cleaning, technical information or
connecting to a switchboard, please
refer to the ‘General information’
section in the full user guide at
www.bt.com/producthelp
Guarantee
Your BT Decor 2200 is guaranteed for a period of 12
months from the date of purchase.
Subject to the terms listed below, the guarantee
will provide for the repair of, or at BT’s or its agent’s
discretion the option to replace the BT Decor 2200, or
any component thereof, which is identified as faulty or
below standard, or as a result of inferior workmanship
or materials. Products over 28 days old from the date
of purchase may be replaced with a refurbished or
repaired product.
The conditions of this guarantee are:
• The guarantee shall only apply to defects that
occur within the 12 month guarantee period.
• Proof of purchase is required.
• The equipment is returned to BT or its agent
as instructed.
This guarantee does not cover any faults or defects
caused by accidents, misuse, fair wear and tear,
neglect, tampering with the equipment, or any
attempt at adjustment or repair other than through
approved agents.
This guarantee does not affect your statutory rights.
For further information within and outside the 12
month guarantee, please refer to the full user guide at
www.bt.com/producthelp
Product disposal instructions
The symbol shown here and on the product
means that the product is classed as Electrical or
Electronic Equipment and should not be disposed with
other household or commercial waste at the end of its
working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place
to recycle products using best available recovery and
recycling techniques to minimise the impact on the
environment, treat any hazardous substances and
avoid the increasing landfill.
Product disposal instructions for residential users
When you have no further use for it, please remove
any batteries and dispose of them and the product as
per your local authority’s recycling processes. For more
information please contact your local authority or the
retailer where the product was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check
the terms and conditions of the purchase contract
and ensure that this product is not mixed with other
commercial waste for disposal.
R&TTE Directive & Declaration
of Conformity
This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential
requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive
(1999/5/EC).
The Declaration of Conformity is published on
the website www.bt.com/producthelp
Please
turn
over
Important: Only use the telephone line cord supplied in this box,
or this product may not work. Any replacement batteries must be of
the same type as supplied.
Check box contents
07900 124456
AM
PM
NEW
BT Decor 2200 corded telephone with handset
and telephone line cord attached
10%
4x AA 1.5v batteries
(pre-installed)
Set time and date
The default time format is 24 hour but you can change this to 12 hour, see below
for instructions. (Please note, you should set the time and date in the 24 hour format
first before changing to the 12 hour format if required).
Press .
BT services is displayed. Press to display Set Time and Date , press
to select.
The first digit of the time flashes. Use the keypad to enter the time using 2 digits for
the hour and 2 digits for the minutes and press to confirm.
The current date setting is displayed with the first digit flashing. Use the keypad
to enter the date using 2 digits for the day, 2 digits for the month and 2 digits for the
year e.g. 21/05/11 for 21st May 2011, press to confirm. The date will be displayed
as dd/mm only.
Set the time format (12 or 24 hour)
Press .
BT services is displayed. Press to display Time Format and press .
Press or to select either
12 hour or 24 hour and press . Saved is displayed.
If you ever need to remove the batteries, ensure the phone is disconnected from
the phone line, turn the phone over and remove the battery compartment cover
by pressing in on the plastic clip and lifting the cover off. Pull the ribbon to remove
the batteries.
Your BT Decor 2200 is now ready for use.
Setting up is easy. Just follow the simple steps in this guide.
If you need further assistance, please visit our website www.bt.com/producthelp
to view our advanced user guide
1 Set up
1. Activate the batteries by pulling the plastic tab away from the underside of
the phone.
2. Plug the end of the telephone line cord into the telephone wall socket.
You must plug the phone into the wall socket via an ADSL microfilter if you are
using broadband on the same phone line.
1
2

Caller Display and the calls list
You must subscribe to a Caller Display service for this feature to work. Your network
provider may charge you for this service.
View and dial from the calls list
Press . Calls are listed in order from newest to oldest.
New will be displayed if the
call is new (unanswered).
If the caller’s details are stored in the directory and an exact match is found, the caller’s
name will be displayed as well as the number.
Scroll or through the list.
To dial the displayed number, lift the handset or press or .
1571 Voice mail indication
You must subscribe to a BT messaging service either BT Answer 1571 or
Call Minder for this feature to work. A fee is chargeable for Call Minder.
Access your voice mail messages
When you’ve received a new voice mail message the green LED on the button
light will flash.
Press . Handsfree mode will be activated and you will hear the telephone
dialling out. After a few seconds you will be connected automatically to your voice
mail service.
Or
Lift the handset and wait for the dial tone. Press . The number is displayed and
you will hear the telephone dialling out. After a few seconds you will be connected
automatically to your voice mail service.
Turn 1571 on or off
Press .
BT services is displayed. Press or to display Message Waiting
and press .
Press or to select either
ON or OFF and press . Saved is displayed.
2 Go!
Making calls
Lift handset and dial telephone number. To end the call, replace the handset.
Mute
Press and release Mute during a call to activate mute mode. The red LED on the button
will illuminate to indicate mute is on.
Press and release Mute again to return to your caller.
Handsfree
Press during a call. Place the handset back on the base. Continue your conversation in
handsfree mode. The green LED on the button illuminates when handsfree is on.
To switch back to using the handset at any time during the call, simply lift the handset.
Last number redial
Lift the handset (or press ), then press . The last number called will
be redialled.
Directory (up to 50 entries)
Storing new directory entries
Press .
If the directory is empty:
Phonebook Empty will be displayed briefly and then Add Entry ,
press .
If there are already entries stored, the first alphabetical entry will be displayed.
Press to display
Add New Entry and press .
Enter the name for the entry using the keypad then press .
Enter the telephone number for the entry using the keypad then press .
Entry Saved is displayed.
Dial a directory entry
Press , then or to scroll to the directory entry you want.
Or, to search alphabetically:
Enter the first letter of the name you want e.g. for Emma, press twice to display
names beginning with E, then scroll using or to the name you want.
Press to dial the displayed entry.
Adjust the ringer volume (high, low or ringer off)
Press .
BT services is displayed, press to display Ringer volume and press .
Current volume setting is displayed. Press or to change the volume level.
On each button press you will hear an example ring.
With the volume you want displayed, press to confirm.
Select the ringer tone
Press .
BT services is displayed.
Press to display
Ringer Tones , press to select.
Press or to hear and display each tone.
With the tone you want displayed, press to confirm.
Adjust the display contrast (5 levels)
Press .
BT services is displayed.
Press to display
Contrast , press to select.
Press or to change the contrast level, press to confirm.
Your telephone
Find out more
• New Frequently Asked Questions available at www.bt.com/producthelp
• If you need more detailed instructions, a full user guide is available to
download from www.bt.com/producthelp
Access Settings menu.
Press when viewing Calls
list, directory or redial list
to view sub-menu list.
3 Line Display
When in standby display
shows time and date.
Calls LED
Red calls LED flashes to
indicate an incoming call. Use to store and dial
directory entries.
Help
Most problems can be fixed with a few simple checks.
Problem Solution
No dial tone Only use the cables supplied.
Make sure the telephone line cord is plugged in correctly.
No display Make sure the batteries are fitted correctly observing the
polarity markings.
Using broadband on the same
phone line?
Make sure you plug the phone
into the wall socket via an ADSL
microfilter (not supplied), otherwise
you may have problems with this
product and your broadband service.
ADSL
microfilter
07900 124456
AM
PM
NEW
07900 124456
AM
PM
NEW
Recall for use with a switchboard/
PBX and BT Calling Features.
Press to move back to previous
menu screen or press and hold
to return to standby.
Use to delete entered digits/letters.
Access Calls list.
Use to scroll down through the
menu, directory and Calls list.
Mute
Lets you talk to someone
in the same room without
the person you are calling
hearing you. Red LED
illuminates when mute
is on.
Increase or decrease
the loudspeaker
volume only.
Press to use
handsfree mode.
Green LED illuminates
when handsfree is on.
Microphone
When using handsfree
your voice is projected
through the base
microphone.
Access last number called.
Use to scroll up through the menu,
directory and Calls list.
Press to dial a displayed number.
Press to confirm a menu selection.
Press to automatically dial 1571
to easily access BT Answer 1571
or Call Minder.1
The green LED flashes when you
have new messages waiting on
your network’s answering service.
1 To use the 1571 feature, you must subscribe to your network’s answering service and batteries must be installed.