Bticino Axolute 349311 User manual

Contents
349311
349312
11/09-01 PC
User manual
Video Display

Contents
1 Introduction and basic functions 5
General information■6
Your Video Display: use it now!■6
Video door entry function key✔s
Navigation key✔s
Menu functions■8
Volume adjustmen✔t
Monitor adjustmen✔t
Camera swin✔g
Bells adjustmen✔t
Pagin✔g
2 Trouble shooting 15
Push to Talk mod✔e
3 CCTV functions 19
Activation 2■0
Intercommunication 2■0
Camera 2■1
Cycle cameras 2■1
Staircase lights 2■2
Call exclusion 2■2
4 House automation functions 23
Scenarios 2■4
Alarms 2■5
Sound system 2■6
Temperature control 2■7
Multimedia menu 2■9
5 Services 31
The “Settings” menu 3■2
Services 3■3
Professional studi✔o
Hands fre✔e
Door stat✔e
Alarm message✔s
Messages 3■5

4
Notes

5
1
1 Introduction and basic functions
General information■
Your Video Display: use it now!■
Video door entry function keys✔
Navigation keys✔
Menu function■
Volume adjustment✔
Monitor adjustment✔
Camera swing✔
Bells adjustment✔
Paging✔

Introduction and basic functions1
6
TheVideo Display oers the normal video door entry and CCTV functions
and can also interact with your My home system.
Fitting in with My Home
•Scenarios:
Runs the scenarios saved in the Scenario module.
•Alarms:
Signals the last alarm events which have occurred and the division of
the system.
•Sound system:
Manages the BTicino digital sound system.
•Temperature control:
Displays and adjusts the temperature in the various zones of the home
and the state of the control unit.
General information■Your Video Display: use it now!■
7
5
4
2
6
8
1
3
1- Entrance panel and cycling
switching ON key
2- Door lock key
3- Connection key
4- Call exclusion LED*
5- Navigation keys
6- Microphone
7- LCD 2,5”colour display
8- Loudspeaker
* It lights up when the bell volume is set to 0.
WARNINGS
■Incorrect use of the Video Display and of all the devices
connected to it excludes any guarantee !
■ For cleaning only use a damp or antistatic cloth. Avoid the
use of alcohol or chemical detergents.
LCD screen note
The LCD screen has been manufactured using advanced high
precision technology. It is however possible that sometimes up to
5 small black or coloured dots (red, blue, green) may appear on the
LCD screen. This is an absolutely normal result of the manufactur-
ing process and is not indicative of a malfunction and/or fault.

Introduction and basic functions 1
7
Video door entry function keys✔Navigation keys✔
key
Allows access to the menu; confirms the
selection made.
keys
Inside the menu they change the value set.
In audio/video connection they allow rapid
access to the volume and monitor settings.
Activation Entrance Panel/Cycling
It activates the switching on of the associated Entrance
Panel and, if present, allows the cycling display of the
other Entrance Panels/cameras.
keys
Inside the menu they select the previous or next
item.
Connection key
Activates/deactivates the audio connection.
When a call has been received the LED ashes; press
once to answer: the LED shines steadily.
At rest activates the paging function (if enabled).
Door lock key
When there is a call it opens the door lock of the Entrance Panel
from which the call was made, at rest that of the associated
Entrance Panel. The LED signals that it is activated.
keys
Returns to the previous window. If you are
already on the first window it switches the
display o.

Introduction and basic functions1
8
Three possible solutions for drawing up the main menu are given below:
• menu with COMMUNICATION functions;
• menu with HOME AUTOMATION functions;
• CUSTOMISED menu.
For more explanations consult the complete User Manual in the CD supplied.
Use the keys to select the functions from those available:
1) Submenu and commands
2) Use the settings icon to access a series of adjustments/services
described below
1 1 1
1 1 2
COMMUNICATION
Main menu example with programming of just the COMMUNICATION
commands.
HOUSE AUTOMATION
Main menu example with communication and house-automation
submenu.
Menu functions■
Use the OK key to access the main menu:
1 2 3
3 4 5
1 2 3
4 5 6
1) Activation
2) Intercommunication
3) Camera
4) Cycle cameras
5) Settings
1) Communication
2) Scenarios
3) Alarms
4) Sound system
5) Temperature control
6) Settings
SCENARIOS
ACTIVATION I
SETTINGS

Introduction and basic functions 1
9
The installer has given the exact conguration of your Video Display
the tables below; if he has not lled it in ask for it.
COMMUNICATION
FUNCTIONS DESCRIPTION
HOUSE AUTOMATION
SUB-MENU SYSTEM FOUND
SCENARIOS
ALARMS
SOUND SYSTEM
TEMPERATURE CONTROL
MULTIMEDIA INTERFACE
CUSTOMISED MENU
The customised menu allows more intuitive use of the Video Display
functions. In fact the menu only displays the functions in your My
Home system and the text of each command can be customised in the
installation phase.
Using the customised menu also lets you:
•Have the PROFESSIONAL STUDIO, HANDS FREE, PAGING and
MULTIMEDIA functions, which otherwise can only be called from the
SETTINGS menu, in the main page or in another page.
1 2 3
4 5 6
1) Communication
2) Professional studio
3) Hands free
4) Paging
5) Multimedia
6) Settings
SETTINGS

Introduction and basic functions1
10
NOTE: During a video door entry call you can access the Adjustments
menu directly by pressing the or key.
Volume adjustment✔
Select
Adjustments
Press OK to access
the menu
Inside the menu select
one of the items
(e.g. Bells)
Adjust the volume to
the level required.
EP SOUND = sound volume when talking to the entrance panel.
INTERCOM = sound volume when holding an intercom conversation.
BELLS = volume level for all the bells.
SOUND SYSTEM = sound system volume.
Press OK
to conrm
S
IMPOSTAZIONI
ADJUSTMENTS
VOLUME
BELLS

Introduction and basic functions 1
11
NOTE: During a video door entry call you can access the Adjustments
menu directly by pressing the or key.
Monitor adjustment✔
Select
Adjustments
Press OK to access
the menu
Select
Monitor
Press OK
to conrm
Inside the menu select
one of the items
(e.g. Contrast)
Make
the adjustment
IMPOSTAZIONI
ADJUSTMENTS
MONITOR
COLOUR
CONTRAST

Introduction and basic functions1
12
NOTE: This menu can only be accessed during the connection with the
entrance panel, if this is set up for the camera swing.
Camera swing✔
Select
Adjustments
Press OK to access
the menu
Select
Swing
Press OK
to conrm
Adjust the correct
camera angle
ADJUSTMENTS
SWING BRACKET

Introduction and basic functions 1
13
You can associate one of sixteen tunes to each call event.
Bells adjustment✔
Select
Bells
Select Confirm and then OK to
save the selection and return to the
previous page
Adjust the volume
Choose the tune
Select
the event
Press OK to access
the menu
Press OK
to conrm
CALL FROM EP = call from the entrance panel (S=0 o S=1)
INTERNAL INTERCOM = call from the intercom in your apartment
EXTERNAL INTERCOM = call from an intercom in another apartment
CALL TO THE FLOOR = call from the pushbutton near your entrance door
IMPOSTAZIONI
01
BELLS
CALL FROM EP (S=0)
TUNE

Introduction and basic functions1
14
If your system is set up, using the icon in the main menu a “paging” call
can be sent to the system:
•Basic: only sound system
•Enhanced: on the speaker* audio handsets as well
Paging✔
Once the communication is activated the voice will be played on the whole
system.
Select
Paging
Press OK
to conrm
The page function can be activated directly by pressing the key
(if the installer has congured it).
* Congurate with Software
PAGING

15
2
2 Trouble shooting
Push to Talk mode✔

Trouble shooting2
16
PROBLEM SOLUTION
On pressing the Entrance panel Activation/Cycling key ( ) no picture
appears.
- the audio/video channel may be busy, wait for it to become free
(from 1 to 3 minutes) and try again.
On pressing the OK key the menu does not switch on and the
handset gives a busy sound
- the audio/video channel is busy, wait for it to become free (from 1 to 3
minutes) and try again.
When called the handset does not ring
- check that the call has not been excluded (the call exclusion LED is
ON);
- check the conguration of the devices.
At the entrance panel it is dicult to hear the caller
- talk at a maximum distance of 40 centimetres from the Video
Display microphone;
- check the entrance panel settings with the installer and if necessary
reduce the microphone volume;
- you can communicate in PUSH TO TALK mode (see description on
next page).
At the handset it is dicult to hear the caller
- check the volume setting on the Video Display;
- make sure that there are no strong noise sources near the Video Display;
- you can communicate in PUSH TO TALK mode (see description on
next page).

Trouble shooting 2
17
Press the Connection key to answer the call.
The connection LED lights up.
Receiving a call from the entrance panel.
During the conversation you can activate the PUSH TO TALK function.
Press the Connection key for at least 2 seconds to talk to the entrance
panel.
The LED remains ON.
Push to Talk mode✔

Trouble shooting2
18
Release the key to hear from the entrance panel.
The LED becomes red.
To end the connection press the connection key briey.
The LED goes out.

19
3
3 CCTV functions
Activation■
Intercommunication■
Camera■
Cycle cameras■
Staircase lights■
Call exclusion■

CCTV functions3
20
This function activates an actuator or an entrance panel. As an example
you can activate the opening of a secondary gate.
This function allows conversation with other video handsets/ handsets
installed in your home or in other apartments.
Command Performed appears on
the screen briey
To quit the menu press the C key
Command Performed appears briey
and then the screen switches o
If the audio/video channel is occupied
by another user you hear a sound and
the command is not performed.
Wait until the channel is free and
try again.
If there is a call from the entrance panel,
the conversation is interrupted.
Activation■Intercommunication■
Press OK
to conrm
Select
the function
Press OK to access
the Main menu
Press OK
to conrm
Select
the extension to call
Press OK to access
the Main menu
COMMAND PERFORMED COMMAND PERFORMED
INTERCOMMUNICATING I
ACTIVATION I