Bticino Classe100 X16E Operating manual

User and installation manual
www.bticino.com
Classe100 X16E
344682
RA00169AC-11/21-PC

Classe100 X16E
User and installation manual

3
Contents
Classe100 X16E
User and installation manual
Quick guide 5
Answer a call 5
Auto-switching on and camera scrolling 7
Call another room or apartment (intercom) 9
Dissociate a smartphone 11
Dissociate an user 12
Customise the home page of the Door entry Classe100X App 14
General information 16
Warnings and recommendations 16
Warnings and consumer rights 17
Front view 18
Function keys and status LEDs 18
Rear view 20
Installation 21
Dimensional data and recommended installation heights 21
Wall-mounted installation 21
Installation on the tabletop bases 344692 (optional) 23
Configuration 25
Programming of the programmable keys 26
Use from the device 33
Functions 33
Answer a call 33
Call another room or apartment (intercom) 34
PE or cameras direct auto-switching on 36
NETATMO cameras 38
Door lock release 41
Paging 42
Services 43
Inductive loop 43
Door status 44
Professional Studio (Office) 45
Safe door lock 46
Device adjustments and settings 47
Use of the joystick 47
Wi-Fi adjustments and settings 48
Settings 59
Use with the Door entry Classe100X App 62
Introduction 62
Account registration 63
Authentication 65
Forgotten password 66
Help 67
FAQ 68
Sending log 68
Association of the device 69
Home page 78
Display the cameras or Entrance Panels 79
Open door locks 81
Staircase Lights 81
To receive a video door entry call 82
Call home: Call your Classe100 X16E 86

44
Classe100 X16E
User and installation manual
Menu 88
Users 89
Settings 94
Account 108
NETATMO cameras 117

Quick guide
54
Classe100 X16E
User and installation manual
4
12
3
Quick guide
Answer a call
1. Touch to answer the call.
2. If necessary, during the call press the joystick to display the audio/video parameter adjustment
icons.
3. Move the joystick up/down to select the type of parameter for which you want to modify the
value (see the following table) among:
– Speaker volume (Parameter that can be adjusted only with active audio);
– Image brightness;
– Image contrast;
– Image colour.

Quick guide
6
Classe100 X16E
User and installation manual
4
5
5. Touch to end the call.
4. Touch to open the main Entrance Panel door lock

Quick guide
76
Classe100 X16E
User and installation manual
3
1
2
Auto-switching on and camera scrolling
Note: switching from one camera to another is also possible without enabling the audio.
2. If necessary, touch to activate the audio communication
3. Touch to display another Entrance Panel or camera (using the scrolling service). When
switching from one camera to the next the key lights up.
1. Touch to display the Entrance Panels or the cameras in your system.

Quick guide
8
Classe100 X16E
User and installation manual
4
4. Touch to end camera display mode, or wait for the automatic switch off time to elapse.

Quick guide
98
Classe100 X16E
User and installation manual
Call another room or apartment (intercom)
1
A
#2
Key (A) lights up to indicate that the call is active.
1. For example, touch programmable key to activate the communication with the Internal Unit
(e.g. configured as 2)
Note: the programmable key to use for calling a certain Internal Unit is set by the installer (see
Programming of the programmable keys).

Quick guide
10
Classe100 X16E
User and installation manual
#2
When the Internal Unit answers, the key starts flashing. Touch it to end the call or establish
communication with the Internal Unit.
Note: if during the conversation a call is received from the Entrance Panel, the conversation is
interrupted in order to answer the Entrance Panel call.