Bubbli BBSTERMICRA User manual

Microwave Steam Steriliser
BBSTERMICRA
Quick Start Guide
Safety Warnin s
Read these instructions carefully before use. Failure to follow and observe these instructions
may lead to accidents.
Workin Environment
•Do not place unit on hot surfaces such as cooking plates, burners, ovens or similar.
•Must be used on a flat, stable surface.
•This appliance is for household use only. It is not designed for professional, industrial use.
•This is not a toy. hildren should be supervised to ensure that they do not play with it.
•Ensure your hands are clean at all times while using the steriliser.
Usa e Warnin s
•Before using this steriliser, wash all bottles and accessories with lukewarm soapy water,
then rinse them all thoroughly.
•The water limits must be followed strictly to prevent scalding and to achieve optimal
results.
•Do not reuse residual water from previous use.
•Do not sterilise without water in the base.
•Do not sterilise metallic or electronic items in this steriliser.
•Do not sterilise bottle brushes in this steriliser.
•Do not overload the steriliser.
•Always place bottles and accessories with their cavities facing downwards during
sterilising.
•Do not place the tray upside-down.
•Ensure the handles of the lid are locked before you start sterilising.
•Ensure the microwave is dry and clean before using the steriliser.
•Do not exceed the recommended heating time.
•If the microwave has a grill function, ensure that it is switched off and completely cooled
down before placing the steriliser in the microwave.
•Always allow at least 2 minutes for the steriliser to cool down after sterilising. heck its
temperature with the back of your hand before taking it out of the microwave to avoid
burns.
•Keep a safe distance from the steriliser to avoid the hot steam that will escape.
•Handle the steriliser and sterilised products with care at all times, as they may be hot.
•Any misuse or failure to follow these instructions renders the warranty null and void.

Product Layout
1. Measuring up (120ml)
2. Lid
3. Handles
4. Tray
◦Teat avity
◦Bottle avity
◦enter Stem with Slots
5. Base
6. lipper
Usa e Instructions
1. Lift tray out of base.
2. Pour 200ml water into the base using the measuring cup (Fig 1).
3. Place the tray into the base (Fig 2).
4. Place the desired bottles and accessories onto the tray. You could also follow the
"Recommended ways to position the bottles and accessories" for optimal sterilisation.
5. Put on the lid, then press both sides of the handles firmly until they click securely into
place (Fig 3).
6. Place the steriliser into the center of the microwave (Fig 4).
7. Select the heating time based on the power of your microwave and the table below:
Microwave Oven Power Sterilisation Time
500 – 800W 6 minutes
850 – 1000W 4 minutes
1100 – 1800W 2 minutes

Recommended ways to position the bottles and accessories
6 x 125ml or 260ml bottles
1. Place 6 teats on the cavities with the 'teats' symbols
surrounding centre stem.
2. Put the screw rings on top of the teats.
3. Put 3 bottle covers onto the slots of the centre stem, and
the other 3 covers on top.
4. Place the 6 bottles upside down on the cavities with the
'bottle' symbols.
3 x 330ml bottles
1. Place 3 teats on the cavities with the 'teats' symbols
surrounding the centre stem.
2. Put the screw rings on top of the teats.
3. Place the 3 bottles upside down on the outer cavities with
the 'teat's symbols.
4. Put the 3 bottle covers inbetween the bottles.
After Use
1. Leave the steriliser in the microwave for 2 minutes to cool down.
2. arefully remove the steriliser from the microwave, gripping both handles carefully. Do
not remove the steriliser if it is too hot to touch.
3. Open the lid by unlocking the handles. Keep your face back away from the lid to allow
the hot steam to escape upwards.
4. Ensure your hands are clean. Use the tongs to remove the bottles and accessories from
the steriliser.
Cleanin
•This steriliser can be cleaned with hot soapy water, and it is also dishwasher safe.
•Ensure that it is well cleaned and thoroughly drained before each use.
Troubleshootin
If you have any problems, issues or concerns regarding the use of this product, please contact
the Kogan.com customer support team.
Do not use the product if it is damaged in any way, as this may reduce the effectiveness of the
sterilising process.