Bucktool DC38-1 User manual

INSTRUCTION
MANUAL
IMPORTANT:
For your own safety, read and follow all of the Safety
Guidelines and Operating Instructions before operating
this product.
Dust Collector Cyclone Assembly
https://www.bucktool.com
Having Problems ?
Give us a chance to help you before returning this product
Email : [email protected]
2
GET IT DONE!

2DC38-1
Safety Guidelines - Definitions
Key Parts Diagram - Dust Collector Cyclone Separator
Model: DC38-1
• Do not vacuum anything that is burning or smoking, such as cigarettes, matches,
or hot ashes.
• Do not vacuum, or use this Dust Deputy near flammable or combustible liquids,
gases, or explosive dusts, such as gasoline or other fuels, lighter fluid, cleaners,
oil-based paints, natural gas, hydrogen, coal dust, magnesium dust, grain dust,
aluminum dust, sugar dust, fl our dust or gun powder.
• To reduce the risk of health hazards from vapors or dusts, do not vacuum toxic
materials unless a HEPA fiter is used. Do not use or store near hazardous
materials.
• Wood dust mixtures are highly flammable and can be explosive.
NEVER introduce sparks or sources of ignition into collector.
• NEVER leave wood dust in a building or vehicle.
•
Keep fire extinguishers handy at all times.
4” Adapter
(2 Pcs)
4” Clamp
(2 Pcs)
Read the installation and maintenance instructions as well as the
recommended safety practices in this manual before assembling
and using the Dust Collector Cyclone.
Dust Deputy
(1 Pc)
4.3” Clamp
(2 Pcs)

3
DC38-2
Key Parts Diagram - Dust Collector Drum
Model: DC38-2
Assembly Caster Wheels
When the separator and drum assembly together
1. Take out all the accessories from dust drum.
2. Attach the caster wheels to the dust drum with wheel support and nuts.
Locking Band
(1 Pc)
Visible Window
(1 Pc)
Plastic Dust Bag
(1 Pc)
Drum Cover
(1 Pc)
Dust Drum
(1 Pc)
Caster Wheel Assy
(4 Pcs)
Grinding Chain
(1 Pc)

4
Working Principle
Troubleshooting
Connect the dust collector
Connect the hose
Cyclonic action
Dust & debris
dirty air enters the cyclone
spins dust & debris from the airstream
are trapped in the drum below
clean air rises through
the hose to the dust collector
PROBLEM PROBLEM CAUSE
Dust Deputy not separating well
Low air volume
Air leak. Check cyclone fl ange / drum lid / barrel. Even
small leaks will affect performance.
Vacuum fi lter clogged. Blockage in hose.
Material swirls in cyclone and won’t
drop down into drum.
Air leak in bottom of cyclone / drum lid or dust drum.
Large, bulkier material might swirl. Restart or temporarily
cut off air fl ow to drop material down.