burmeier Regia Care Bed User manual

Instruction Manual
Regia Care Bed
Partner bed variant
Last updated: 07/07/2020
288512_V0

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 2
Regia –Partner bed variant
1
Footboard
2
Lower leg rest handle (both sides) / mattress retainer bar
3
Connecting element 1x at the foot end, 1x in the centre (optional)
4
Side panels 2x (optional equipment)
5
Backrest handle (both sides) / mattress retainer bar
6
Adapter sleeve for patient lifting pole (head end, 2x)
7
Headboard
8
Split safety side (TSG) “Easy Switch” (telescopic, optional equipment)
9
Pedal for operating castor brakes, foot end (on both sides) central locking
In this instruction manual, numbers which appear in square brackets [ ] and
bold type refer to the care bed’s operating devices as shown in this illus-
tration.
9
D
2
8
1
3
3
2
1
5
4
6
5
4
7

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 3
Contents
FOREWORD..............................................................................................................5
GENERAL INFORMATION........................................................................................6
Definition of the groups of persons involved........................................................7
Safety instructions ...............................................................................................8
Explanation of the safety symbols used....................................................8
Safety information for the operator ...........................................................9
Safety information for the user, resident.................................................10
Product description............................................................................................12
Intended use...........................................................................................12
Use for the intended purpose..................................................................12
Contraindications....................................................................................13
Side effects.............................................................................................13
Special features......................................................................................14
Structural design.....................................................................................14
Materials used ........................................................................................15
ASSEMBLY AND PUTTING INTO SERVICE..........................................................16
Location requirements.......................................................................................17
Assembling the bed...........................................................................................18
Assembling the chassis ..........................................................................18
Headboard/footboard assembly..............................................................23
Dismantling headboard and footboard....................................................27
Attaching/removing the side panels (optional equipment) ......................29
Safety sides.......................................................................................................36
No safety side.........................................................................................36
Split safety side (optional equipment).....................................................37
Adaptable bed extension (option)......................................................................48
Attaching the bed extension....................................................................49
Comfort mattress base - 90 cm width (optional equipment)...............................51
Electrical connection..........................................................................................52
Connecting the sync cable......................................................................54
Fixing the beds in place..........................................................................55
Synchronising the partner bed................................................................56
Putting into service ............................................................................................57
Dismantling the bed...........................................................................................58
OPERATION............................................................................................................59
Tips on using the bed safely in a domestic setting.............................................59
Moving and braking the bed...............................................................................60
Castors ...................................................................................................61
Electrical adjustment options.............................................................................62
Special safety information on the electrical drive system........................62
Handset ..................................................................................................64
Operation of safety sides...................................................................................68
Special safety information for safety sides..............................................68
Split safety side (TSG) (optional equipment) ..........................................70
Mechanical adjustment options..........................................................................73
Manual CPR release of the backrest......................................................73

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 4
Lower leg rest .........................................................................................75
Attachments and optional features.....................................................................76
Cable holder............................................................................................76
Adapter sleeves for patient lifting pole ....................................................77
Grab handle (triangular handle) ..............................................................78
Use as a single bed ...........................................................................................79
CLEANING AND DISINFECTION............................................................................80
General information on cleaning and disinfection ..............................................80
Cleaning and disinfection plan...........................................................................81
Instruction of users and staff..............................................................................82
Cleaning of firmly upholstered components.......................................................83
Cleaning the fabric upholstery.................................................................83
Cleaning faux leather upholstery.............................................................83
Cleaning and disinfection agents.......................................................................85
Handling cleaning and disinfection agents.........................................................86
MAINTENANCE.......................................................................................................87
Legal principles..................................................................................................87
By the user.........................................................................................................88
By the operator ..................................................................................................89
Replacement parts.............................................................................................93
Manufacturer’s address/ service address...........................................................93
Replacement of electrical components..............................................................94
Special safety information on replacing electrical components...............94
Plug assignment on the control unit........................................................95
Complete overview - Electrical connections of both beds.......................96
Replace the handset...............................................................................97
Replace the control unit ..........................................................................97
Replace the motors.................................................................................97
Initialise the control unit...........................................................................98
Decommissioning....................................................................................99
TROUBLESHOOTING ...........................................................................................100
ACCESSORIES......................................................................................................102
TECHNICAL DATA................................................................................................103
Dimensions and weights (single bed) ..............................................................103
Technical data..................................................................................................104
Electrical data .......................................................................................104
Type plate –electrical data...................................................................106
PID bar code.........................................................................................106
Ambient conditions................................................................................107
Other labelling on the product...............................................................108
Information on electromagnetic compatibility (EMC)........................................109
Classification....................................................................................................112
DISPOSAL INSTRUCTIONS..................................................................................113
DECLARATION OF CONFORMITY.......................................................................114

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 5
1 Foreword
Dear Customer,
Burmeier has built this bed to give you the best possible help with the challenges posed
by nursing and caregiving. We passionately pursue the goal of developing products that
are durable and of a high-quality. Our products should make residents feel as safe and
comfortable as possible during their stay in bed and also lighten the workload of care
staff and caring relatives. For this reason, the electrical safety and all functions are
tested prior to delivery. Each bed leaves our factory in perfect condition.
Correct operation and care are necessary to keep the bed in excellent condition during
long-term use. Please therefore read and observe these instructions carefully. They will
help you to put the bed into service for the first time and to use it on a daily basis. This
instruction manual contains all the information you will need to make it as easy and safe
as possible to control and handle this bed, both for you as the operator and for your us-
ers. This instruction manual is a practical reference book and should be kept close to
hand at all times.
The medical retail trade that delivered this bed is also there to assist you with any ques-
tions you may have concerning servicing and repairs during the product’s lifetime of
use.
This bed is designed to give the person in need of care and all users a safe and practi-
cal piece of equipment that provides decisive support with the ever-increasing require-
ments of care-giving.
Thank you for the confidence you have place in us and our products.
Burmeier GmbH & Co. KG
You are a medical product retailer and would like to get in touch with Burmeier? Feel
free to phone us: You can contact our service centre in Germany by phone at +49 (0)
5232 9841 - 0. Customers outside Germany can contact our distribution companies in
their respective country if they have any questions. For more information visit:
www.burmeier.com

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 6
2 General information
The Regia care bed in the partner bed variant, hereafter referred to as
the “bed” or the “partner bed”, is manufactured in various models. This
instruction manual has been issued for several bed models. It is possi-
ble that certain functions or special features are described which your
bed does not have.
Instructions for the operator:
•This care bed fulfils all the requirements of the Medical Device Regulation (EU)
2017/745 (MDR). It is classified as a Class I active medical device in accordance
with § 13 of the German Medical Devices Act (Medizinproduktegesetz: MPG).
•Please observe your obligations as the operator in accordance with the Medical De-
vices Operator Ordinance (Medizinprodukte-Betreiberverordnung, German abbrevia-
tion: MPBetreibV), to ensure that this medical product is always operated safely and
with no risk of danger to patients, users, or third parties.
•Any item of technical equipment, electrical or otherwise, can prove hazardous if used
improperly.
•Read through this instruction manual from start to finish to prevent any injury or dam-
age resulting from incorrect operation.
•You are obliged to instruct users (see Chapter 4) in the proper use of this care bed in
accordance with the Medical Devices Operator Ordinance (MPBetreibV) § 5!
•Ensure that users know where this instruction manual is kept, in accordance with the
Medical Devices Operator Ordinance (MPBetreibV) § 9!
Instructions for the user:
•Before using a bed, the user must check that the bed is fully functional and in perfect
working order, and must observe the instructions in the manual, in accordance with
the Medical Devices Operator Ordinance (MPBetreibV) § 2. This also applies for ac-
cessories.
•Read through this instruction manual from start to finish to prevent any injury or dam-
age resulting from incorrect operation.
•This instruction manual contains safety information which must be followed! All users
working on and with the partner bed must be familiar with the contents of this instruc-
tion manual and follow the safety advice provided.
Before using the bed for the first time:
•Remove all transport securing devices and packaging film.
•Assemble the bed from the knocked down assembly units in accordance with the as-
sembly instructions.
•Clean and disinfect the bed before using it for the first time.

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 7
2.1 DEFINITION OF THE GROUPS OF PERSONS INVOLVED
In this instruction manual, the following groups of persons are defined as:
Operator
Operators (e.g.: medical equipment retailers, specialist dealers, health insurance) are all
natural or legal persons who use the partner bed or on whose behalf it is used. It is a re-
quirement that the operator duly instructs care staff in its use.
Care staff
Care staff are persons who, based on their training, experience or briefing, are qualified
to operate the partner bed on their own authority or to carry out work with the care bed,
or have been instructed how to handle the care bed. Furthermore, they are able to rec-
ognise and avoid potential hazards and assess the clinical condition of the resident.
Residents
In this instruction manual, the term resident is defined as a person who is infirm or in
need of care and occupies this care bed.
It is a requirement that the operator or care staff instructs each new resident in the bed
functions that are important for him/her.

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 8
2.2 SAFETY INSTRUCTIONS
At the time of leaving the factory, this bed represents state-of-the-art technology and
has been tested by an independent testing institute. The most important objective of the
safety information is to prevent personal injuries. Property damage will also be pre-
vented.
Only use this bed if you are absolutely certain that it is in perfect working order!
2.2.1 Explanation of the safety symbols used
In this instruction manual, the following safety symbols are used:
Risk of injury to persons
This symbol indicates hazards due to electrical voltages. There is
danger to life.
This symbol indicates general hazards. There is danger to life and
health.
Risk of damage to property
This symbol indicates possible damage to property. It is possible that
damage may occur to the drive, materials or the environment.
Other advice
This symbol indicates a generally useful tip. If you follow it, you will find it
easier to operate the bed. This tip is provided to give you a better under-
standing.
The safety symbols used are not a substitute for the written safety information. It
is important therefore to read the safety information and follow the instructions
exactly!
All persons who work on or with this bed must be familiar with the contents of
this instruction manual and follow all the safety advice that is relevant for them.

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 9
2.2.2 Safety information for the operator
•Please observe your obligations in accordance with the Medical Devices Operator
Ordinance (Medizinprodukte-Betreiberverordnung: MPBetreibV), to ensure that this
medical product is always operated safely and with no risk of danger to residents,
users or third parties!
•Using this instruction manual, which must be provided with the bed, make sure that
every user is instructed in the safe operation of the bed before using it for the first
time.
•If the bed is used in a domestic setting, leave your contact details with the resident in
case they have any questions regarding its use or servicing. (Use the address field
on the back cover of this manual).
•Draw every user’s attention to the possible hazards that can arise if the bed is im-
properly used. This applies in particular to the use of electrical drives and safety
sides.
•If the bed is in long-term use, test the functions and check for any visible damage
(see Chapter 6.3)after a reasonable period of time (recommendation: once a year)
•Only persons who have been properly instructed in its use must be allowed to oper-
ate this bed.
•Check to ensure that the safety instructions are adhered to!
•Make sure that substitute staff are also sufficiently well instructed in the safe opera-
tion of this bed.
•If any additional devices (such as compressors for positioning systems) are at-
tached, ensure that these are securely fastened and are working properly. Pay par-
ticular attention to:
-Safe routing of all loose connector cables, tubing, etc.
-Ensure that no multiple socket outlets are located under the bed (fire hazard
due to ingressing liquids).
-Chapter 2.3.2 of this instruction manual

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 10
2.2.3 Safety information for the user, resident
•Ensure that the operator/your medical supply store instructs you in the safe opera-
tion of this bed.
•Ask a healthcare professional for advice if you are uncertain about a possible appli-
cation of safety sides or about the necessity of activating the locking functions of the
electrical adjustments.
•Check each time before using the bed to ensure that it is in perfect working order
(see checklist, page 53) Ensure that no obstacles such as bedside cabinets, supply
rails or chairs could impede adjustments to the bed.
•If any additional devices (such as compressors for positioning systems) are at-
tached, ensure that these are securely fastened and are working properly. Pay par-
ticular attention to:
-Safe routing of all loose connector cables, tubing, etc.
-Do not use multiple socket outlets placed loosely on the floor. These could
cause electrical hazards due to damaged mains cables or the ingress of liquids.
If anything is unclear, please contact the manufacturer of the device.
•If any damage or malfunction is suspected, take the bed out of service:
-Unplug the bed from the mains supply immediately.
-Indicate clearly that the bed is “OUT OF ORDER”.
-Report this immediately to the operator responsible/your responsible medical
supply store (see the address on the back cover of this manual).
•Route the mains power plug cable, and also all other cables, in such a
way that they cannot be pulled, driven over or damaged by moving parts
when the bed is operated.
•Never leave unsupervised toddlers or babies alone with the bed!
oThere is a strangulation hazard due to the possibility of entangle-
ment in exposed connection cables (such as the power cable and
handset cable).
oThere is a risk of suffocation from swallowing small parts which
may have become detached from the bed.
•Lock the electrical adjustment functions of the bed if their unsupervised
use could put staff or other persons at risk.
•Hook the mains cable holder onto the headboard before moving the bed
to prevent the mains cable from being driven over, crushed or torn off.
Such damage could lead to electrical hazards and malfunctions (see
Chapter 4.6.1).
•Do not place multiple socket bars under the bed. This could cause elec-
trical hazards due to damaged mains cables or the ingress of fluids.

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 11
•Adjust the mattress base to its lowest position before leaving the resi-
dent unattended. In this way, you considerably reduce the risk of injury
to the resident due to a fall when getting in or out of bed.
•Always ensure that the castor brakes are applied when the bed is not
being moved.
•When not in use, stow the handset in such a way that it cannot inadvert-
ently fall off (hang it up by the hook). Make sure that the cable cannot be
damaged by moving parts of the bed.
•Adjustments must only be performed by, or in the presence of, a trained
person.
•Before carrying out any adjustments, make sure that there are no peo-
ple, limbs, pets or objects in the way, in order to avoid entrapment haz-
ards and/or damage to property. This applies particularly when mattress
base sections are adjusted to a lower height.
•To safeguard against unintentional motorised adjustments, lock the rele-
vant functions of the handset if:
-the resident is unable to operate the bed safely or to free himself/herself
from potentially dangerous situations.
-the resident could be at risk due to unintentional motorised adjustments.
-The safety sides are raised (danger that the person's limbs could be
trapped when adjusting the backrest and thigh rest).
-children are left unsupervised in the room with the bed.
•At regular intervals, carry out a visual inspection of the power plug and
cable to check for mechanical damage (scuffing, exposed wires, kinks,
pressure points, etc.). Perform such a check:
-Whenever the cable has been subjected to any mechanical load, e.g.
has been driven over by the bed itself or by an equipment trolley.
-Whenever the cable has been bent, stretched or violently pulled, e.g.
due to the bed rolling away while it is still plugged into the mains
socket.
-Whenever the bed has been moved or relocated and before plugging
it back into the power socket.
-Regularly, but at least once a week, by the user when the bed is in
constant use.
•Check the strain relief of the power plug cable regularly to ensure that it
is securely fixed.
Observe the safety information found in this instruction manual!

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 12
2.3 PRODUCT DESCRIPTION
2.3.1 Intended use
•This bed is used as an aid in the diagnosis, treatment, alleviation and monitoring of
illnesses or for compensating for injuries or disabilities. For detailed instructions for
use, see →Chapter 9.4.
•The bed itself is not life sustaining or life supporting.
•This bed is not indicated for any particular medical use.
2.3.2 Use for the intended purpose
•This bed was developed as a comfortable solution for the positioning and nursing of
infirm persons in need of care in homes for the elderly, as well as in nursing homes
and comparable medical facilities.
•The use of this bed in hospitals is only permitted in rooms designed for medical
treatment of the application group 0 (in accordance with VDE 0100 part 710, previ-
ously VDE 0107). This bed was not designed for any other usage!
•This bed may be intended for care under the supervision of a doctor and be used for
diagnosis, treatment or observation of the resident. It is therefore equipped with an
option of locking the handset.
•This bed has no special connectors for potential equalisation. Please pay attention
to this before connecting additional mains-operated (medical) electrical equipment. If
necessary, further advice on additional protective measures can be found:
oin the instruction manuals of these additional mains-operated electrical devices (e.g.
compressed air positioning systems, infusion pumps, enteral feeding devices ...)
oin the EN 60601-1-1 standard (Safety of Medical Electrical Equipment)
oin the VDE 0100 standard Part 710 (High Voltage Installations in Hospitals).
•Please refer to the safety information provided in Chapter 4.3.2.2 and 4.4.1, particu-
larly where residents are in poor clinical condition.
•This bed is suitable only for accommodating residents (=persons who are at least
146 cm tall, weigh at least 40 kg and have a body mass index “BMI” greater than 17
(see also Chapter 2.3.3).
•Safe working load (explanation of symbol on bed)
225 kg
This bed (each bed half) may be operated without re-
strictions with a permanent maximum safe working load of
225 kg (resident and accessories).
185 - 215 kg
The permitted weight of the resident (per bed half) de-
pends on the total weight of accessories attached at any
time (e.g. respirators, ventilators, infusions)

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 13
Example:
Weight of accessories
(incl. mattress)
Maximum permitted
weight of resident
10 kg
215 kg
40 kg
185 kg
•This bed may be operated only by persons who have received instruction in its safe
operation.
•This bed is suitable for repeated use. When re-using the bed, pay attention to the
necessary requirements:
-Cleaning and disinfection (see Chapter 5)
-Maintenance/Repeat inspections (see Chapter 6)
2.3.3 Contraindications
•This bed is not suitable for residents who fall below the fol-
lowing minimum body size/weight:
oHeight: 146 cm,
oWeight: 40 kg
oBody mass index1“BMI”: 17
•Particularly when safety sides are used, there is an increased risk of entrapment be-
tween the open spaces of the safety sides for residents with a body size/weight that
is less than this, since their limbs are smaller.
This bed may only be used under the operating conditions described in this in-
struction manual. Its use for any other type of application is deemed to be con-
trary to the intended purpose.
2.3.4 Side effects
Unless suitable measures are taken, residents who spend prolonged periods in bed
may develop decubitus.
1 Calculation of BMI = 󰇟󰇠
󰇟󰇠; example: a) 
  →OK!; b)    →Not OK
Sticker on the
bed chassis

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 14
2.3.5 Special features
•Electrical height adjustment range: approx. 26 - 80 cm
•Electrical thigh rest adjustment from 0° to approx. 40°
•Electrical backrest adjustment from 0° to approx. 70°
•Electrical adjustment to a reverse-Trendelenburg position of approximately 16°
•Moves on four centrally-locking castors
•Mattress base in four sections: WxL approx. 180 x 200 cm (optionally: approx. 180 x
220 cm)
•Removable head and foot section: The headboard and footboard can be quickly re-
moved without tools to provide easier access to the resident.
•Mechanical CPR backrest release
Optional equipment:
•Split safety side on both sides (4x)
•Split side panels on both sides (4x)
•Removable comfort mattress base comprises 2x50 individual spring elements.
These elements are designed to mould themselves closely to the shape of the body
and help to ventilate the mattress. Their flexibility also ensures that the pressure is
optimally distributed. The comfort mattress base also significantly contributes to pre-
venting pressure ulcers.
•Bed extension, adaptable, extends the bed by approximately 20 cm.
2.3.6 Structural design
The partner bed is delivered unassembled so that it can be transported to any room.
The partner bed consists of 2x chassis, 2x headboard [7], 2x footboard [1], 2x mattress
base frame and the side panels [4] and/or the safety sides [8]. The bed is equipped with
four castors which are fitted with a locking brake (see on page 2).
2.3.6.1 Mattress base
The mattress base frame is divided into a backrest, a fixed middle section, a thigh rest
and a lower leg rest. All rests are adjustable. The horizontal mattress base height of
both mattress bases can only be adjusted synchronously. The backrest or thigh rest on
each bed can be adjusted individually.
A handset controls all electrical adjustments.
The entire mattress base and all parts of the bed that can be reached by a resident who
is lying in the bed count as application parts.

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 15
2.3.6.2 Safety sides (optional equipment)
The partner bed can be equipped with safety sides on the outsides to protect the resi-
dent from accidentally falling out of bed. The safety sides can be raised, one after the
other, from the lowered position to provide protection for the resident, and then lowered
again when no longer required.
2.3.6.3 Electrical adjustment system
The bed’s electrical drive system (housing unit) is first fault protected, flame-resistant
(UL94-V-0) and consists on each bed of:
•The central bus control unit, containing plug-in connections for all drive motors and
the handsets that work with protective low voltage
•Electric motors for the backrest and thigh rest
•The electric motors for adjusting the height of the mattress base
•A handset with a strong hook
•A mains plug
•A sync cable
2.3.7 Materials used
The bed is made predominantly of steel sections coated with a polyester powder finish
or a zinc or chromium metal finish. The head and footboards and safety sides are made
of wood or wood products whose surfaces have been finished. Alternatively, fabrics or
faux leather can be used.
All surfaces that can be touched during normal use have been tested for bio-compatibil-
ity and are harmless to humans when in contact with the skin.

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 16
3 Assembly and putting into service
Note:
•This chapter is intended for competent persons of the operator/specialist medical
supply trade and for customers who have purchased the partner bed privately.
•Helpful assembly videos for setting up the partner bed can be found on www.bur-
meier.com/de/information/downloads or directly on YouTube (enter search words
such as: Regia, partner bed, Burmeier, assembly instructions).
•The partner bed comprises two separate beds, which are joined together on the mat-
tress base frame with two connecting elements [3] after final assembly is completed.
For safe operation, at least the foot-end connecting element must be inserted.
•The bed is delivered unassembled. and must be assembled at the place of use.
•On the following pages the assembly of the first half of the partner bed is described.
The assembly of the second half is carried out synchronously with the assembly of
the first half of the bed.
8 packaging units are delivered per partner bed:
-2 boxes, each with a chassis with attached lifting motors. Backrest motor, thigh
rest motor, control unit, handset, mains plug are pre-assembled.
-2 boxes each with 1x mattress base
-2 boxes with 1x headboard and 1x footboard
-1 box with 2x side panels and/or 2x safety sides
-1 box with instruction manual, sync cable, 2x jumper plugs, 2x connecting ele-
ment and cover clips

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 17
3.1 LOCATION REQUIREMENTS
•There must be sufficient room available to accommodate the bed’s entire range of
adjustments. Furniture, window sills, etc. must not impede adjustments.
•Before using the bed on parquet flooring, check whether the castors could leave
marks on the parquet varnish. Use on tiles, carpet, laminate or linoleum floors is
completely safe.
•To prevent dents to floor coverings, the substrate should comply with the recommen-
dations of FEB (Fachverband der Hersteller elastischer Bodenbeläge e.V., = Associ-
ation of Manufacturers of Resilient Floor Coverings) (Technical Information No. 3 -
Maintaining the value of resilient floor coverings) (http://www.feb-ev.com).
•Two properly installed mains sockets must be available as close as possible to the
bed.
•Position the bed so as to allow easy access to the mains plug at all times so that the
bed can be disconnected from the mains, if necessary.
•If any other additional equipment is attached to the bed, (e.g. compressors for posi-
tioning systems, etc.), ensure that this is securely fastened and is functioning
properly. Pay special attention here to the safe routing of all loose connector cables,
tubing, etc. If you have any queries or concerns, consult the manufacturer of the ad-
ditional equipment or Burmeier.
•Ensure that children are not left unsupervised in a room with the bed. This avoids
possible hazards resulting from children playing and unintentionally activating the
electrical/mechanical adjustment functions.
Minimise, as far as possible, the risk of fire due to external in-
fluences. Instruct users about these points:
•Use only flame-retardant mattresses and bedding if possible.
•Avoid smoking in bed, since the mattress and bedding used
may not be resistant to smokers' accessories.
•Only use additional equipment (e.g. electric blankets) and other
electrical devices (e.g. lamps or radios) that are in perfect work-
ing order!
-Ensure that this equipment is used only for the purpose intended.
-Ensure that this equipment is not inadvertently placed on or under
the bedding (danger of overheating)!
•Avoid using extension cables or multiple socket bars under the bed
(risk of fire due to penetrating fluids).

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 18
3.2 ASSEMBLING THE BED
Please note: Individual features in the following illustrations may differ from the features
of your bed.
The bed must be assembled by two people.
Tools required:
•Allen key, 8 mm
3.2.1 Assembling the chassis
Similar to illustration!
•Remove the chassis from the cardboard box
and set it down.
•Remove all packaging foil from the cables.
•Remove the thigh rest motor and the
backrest motor from their transport position
as follows:
-Remove the locking pin on the housing.
-Cut through the cable tie on the drive
tube.
Note: Pay attention to the cable routing
-Put the engines down on the ground.

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 19
•Connect the power plug.
•Connect the two bed control units with the sync cable, see Chapter 3.6.1.
•Move the chassis to the highest position.

Instruction Manual for Regia Care Bed - Partner Bed Variant
Page 20
•Put the mattress base in place.
Note: Pay attention to the signs indicat-
ing the head and foot end.
•Insert the location pins into the holes on
both sides.
•Connect the mattress base and the chassis
with the handwheel bolts
(2 x 2 bolts).