Busch-Jaeger Busch-AudioWorld 8217 U-101 User manual

Product manual │08.12.2021
Busch-AudioWorld
®
8217 U-101
Busch-Radio BTconnect DAB+
Branding -- Releas e 2018-01-01

Table of contents
Product manual 2CKA001373B5163
│
2
Table of contents
1  Notes on the instruction manual....................................................................................................................5 
2  Trademarks....................................................................................................................................................5 
3  Safety.............................................................................................................................................................6 
3.1  Introduction.........................................................................................................................................6 
3.2  Information and symbols used...........................................................................................................6 
3.3  Intended use ......................................................................................................................................7 
3.4  Improper use ......................................................................................................................................7 
3.5  Target group / Qualifications of personnel.........................................................................................8 
3.5.1  Operation ..................................................................................................................................... 8 
3.5.2  Installation, commissioning and maintenance .............................................................................. 8 
3.6  Safety instructions..............................................................................................................................9 
3.7  Cyber security ....................................................................................................................................9 
3.7.1  Stored data................................................................................................................................... 9 
3.7.2  Recommended behaviour ............................................................................................................ 9 
4  Information on protection of the environment .............................................................................................10 
4.1  Environment .....................................................................................................................................10 
5  Setup and function.......................................................................................................................................11 
5.1  Functions..........................................................................................................................................11 
5.2  Possible combinations .....................................................................................................................12 
6  Technical data .............................................................................................................................................13 
7  Connection, installation / mounting .............................................................................................................14 
7.1  Safety ...............................................................................................................................................14 
7.2  Requirements for the electrician ......................................................................................................14 
7.3  Mounting / dismantling .....................................................................................................................15 
7.4  Electrical connection ........................................................................................................................20 
7.5  Multimedia connection .....................................................................................................................21 
7.5.1  Loudspeaker .............................................................................................................................. 21 
7.5.2  AUX (Auxiliary)........................................................................................................................... 23 
7.5.3  Antenna...................................................................................................................................... 25 
8  Commissioning ............................................................................................................................................26 
9  Operation .....................................................................................................................................................28 
9.1  Operating modes..............................................................................................................................28 
9.2  Normal operation..............................................................................................................................30 
9.2.1  Overview .................................................................................................................................... 30 
9.2.2  Button assignment...................................................................................................................... 31 
9.2.3  Adjusting the volume .................................................................................................................. 32 
9.2.4  Selecting the station (Favourites) ............................................................................................... 32 
9.2.5  Operating alarm clock / snooze function..................................................................................... 34 
9.2.6  Sleep function (turn-off time) ...................................................................................................... 37 
9.2.7  Display favourites (favourite stations)......................................................................................... 38 

Table of contents
Product manual 2CKA001373B5163
│
3
9.2.8  Save favourites (favourite stations) ............................................................................................ 38 
9.2.9  Operating Bluetooth
®
.................................................................................................................. 39 
9.2.10  Instructions and the rectification of problems for your Bluetooth operation................................. 43 
9.2.11  Operating AUX ........................................................................................................................... 46 
9.2.12  Voltage failure ............................................................................................................................ 48 
9.3  Operation - Configuration.................................................................................................................49 
9.3.1  Display ....................................................................................................................................... 49 
9.3.2  Button assignment...................................................................................................................... 50 
9.3.3  Functions - Configuration ........................................................................................................... 51 
9.3.4  Menu "Alarm clock" - "Alarm clock" ............................................................................................ 53 
9.3.5  Menu "Alarm clock" - "Alarm profiles"......................................................................................... 54 
9.3.6  Menu "Alarm clock" "Alarm times".............................................................................................. 55 
9.3.7  Menu "Alarm clock" "Deactivate days" ....................................................................................... 57 
9.3.8  Menu "Alarm clock" – "Specifying "Signal tones"........................................................................ 58 
9.3.9  Menu "Station" "Display station list DAB+ " and save favourites ................................................ 59 
9.3.10  Menu "Station" "Display station list FM" and save favourites...................................................... 60 
9.3.11  Menu "Stations" - "Automatic search mode DAB+" .................................................................... 61 
9.3.12  Menu "Stations" - "Automatic search mode for FM stations" ...................................................... 62 
9.3.13  Menu "Station" – "Setting FM stations manually" ....................................................................... 63 
9.3.14  Menu "Station" - "Move favourites"............................................................................................. 64 
9.3.15  Menu "Station" - "Delete favourites" ........................................................................................... 65 
9.3.16  Menu "Bluetooth" - "Mode" ......................................................................................................... 66 
9.3.17  Menu "Bluetooth" – "Connect device"......................................................................................... 67 
9.3.18  Menu "Bluetooth" – "Couple device"........................................................................................... 68 
9.3.19  Menu "Bluetooth" – "Disconnect active device" .......................................................................... 69 
9.3.20  Menu "Bluetooth" – "Uncoupling all devices".............................................................................. 70 
9.3.21  Menu "Settings" - "Language" .................................................................................................... 71 
9.3.22  Menu "Settings -"Bass" .............................................................................................................. 74 
9.3.23  Menu "Settings" - "Treble" .......................................................................................................... 75 
9.3.24  Menu "Settings" - "Start volume" ................................................................................................ 76 
9.3.25  Menu "Settings - "Maximum volume" ......................................................................................... 77 
9.3.26  Menu "Settings" - "AUX"............................................................................................................. 78 
9.3.27  Menu "Settings" – "AUX input gain"............................................................................................ 79 
9.3.28  Menu "Settings" - "Display profile".............................................................................................. 80 
9.3.29  Menu "Settings" - "Display illumination"...................................................................................... 81 
9.3.30  Menu "Settings" - "Display brightness" ....................................................................................... 82 
9.3.31  Menu "Settings" - "Sleep timer" (switch-off time) ........................................................................ 83 
9.3.32  Menu "Settings" – "Energy efficiency" ........................................................................................ 84 
9.3.33  Menu "Settings" - "Extension unit operation" .............................................................................. 85 
9.3.34  Menu "Settings" - "Antenna"....................................................................................................... 86 
9.3.35  Menu "Settings" - "Hotel mode".................................................................................................. 87 
9.3.36  Menu "Info"................................................................................................................................. 89 
9.3.37  RESET (resetting to the factory settings) ................................................................................... 91 
9.4  Menu tree .........................................................................................................................................92 
10  Case studies ................................................................................................................................................95 
10.1  Installation set ..................................................................................................................................95 
10.2  Installation set and extension unit operation ...................................................................................97 
10.3  Installation set and movement detectors .........................................................................................99 
10.4  Ceiling loudspeakers......................................................................................................................102 
10.5  Installation set and Bluetooth loudspeakers ..................................................................................103 

Table of contents
Product manual 2CKA001373B5163
│
4
10.6  AUX and amplifier ..........................................................................................................................105 
10.7  AUX and HiFi system .....................................................................................................................107 
10.8  Playing the multimedia device via the flush-mounted radio on the HiFi system ...........................109 
10.9  AUX and TV audio signals .............................................................................................................111 
11  Maintenance ..............................................................................................................................................113 
11.1  Cleaning .........................................................................................................................................113 
12  FAQ and tips ..............................................................................................................................................114 
13  Declaration of conformity...........................................................................................................................116 
14  Index ..........................................................................................................................................................117 

Notes on the instruction manual
Product manual 2CKA001373B5163
│
5
1 Notes on the instruction manual
Please read through this manual carefully and observe the information it contains. This will
assist you in preventing injuries and damage to property, and ensure both reliable operation and
a long service life for the device.
Please keep this manual in a safe place.
If you pass the device on, also pass on this manual along with it.
Busch-Jaeger accepts no liability for any failure to observe the instructions in this manual.
If you require additional information or have questions about the device, please contact Busch-
Jaeger or visit our Internet site at:
www.BUSCH-JAEGER.de
2 Trademarks
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by [licensee name] is under license. Other trademarks and trade
names are those of their respective owners.


Safety
Product manual 2CKA001373B5163
│
6
3 Safety
3.1 Introduction
The device has been constructed according to the latest valid regulations governing technology
and is operationally reliable. It has been tested and left the factory in a technically safe and
reliable state.
However, residual hazards remain. Read and adhere to the safety instructions to prevent
hazards of this kind.
Busch-Jaeger accepts no liability for any failure to observe the safety instructions.
3.2 Information and symbols used
The following Instructions point to particular hazards involved in the use of the device or provide
practical instructions:
Danger
Risk of death / serious damage to health
– The respective warning symbol in connection with the signal word "Danger"
indicates an imminently threatening danger which leads to death or serious
(irreversible) injuries.
Warning
Serious damage to health
– The respective warning symbol in connection with the signal word "Warning"
indicates a threatening danger which can lead to death or serious
(irreversible) injuries.
Caution
Damage to health
– The respective warning symbol in connection with the signal word "Caution"
indicates a danger which can lead to minor (reversible) injuries.
Attention
Damage to property
– This symbol in connection with the signal word "Attention" indicates a
situation which could cause damage to the product itself or to objects in its
surroundings.
NOTE
This symbol in connection with the word "Note" indicates useful tips and
recommendations for the efficient handling of the product.
This symbol alerts to electric voltage.


Safety
Product manual 2CKA001373B5163
│
7
3.3 Intended use
This device is a radio for flush-mounted installation.
The device is intended for the following:
■Operation according to the listed technical data,
■Installation in dry interior rooms and suitable flush-mounted boxes,
■Use with the connecting options available on the device.
The intended use also includes adherence to all specifications in this manual.
3.4 Improper use
Each use not listed in Chapter 3.3 “Intended use“ on page 7 is deemed improper use and can
lead to personal injury and damage to property.
Busch-Jaeger is not liable for damages caused by use deemed contrary to the intended use of
the device. The associated risk is borne exclusively by the user/operator.
The device is not intended for the following:
■Unauthorized structural changes
■Repairs
■Outdoor use
■The use in bathroom areas


Safety
Product manual 2CKA001373B5163
│
8
3.5 Target group / Qualifications of personnel
3.5.1 Operation
No special qualifications are needed to operate the device.
3.5.2 Installation, commissioning and maintenance
Installation, commissioning and maintenance of the device must only be carried out by trained
and properly qualified electrical installers.
The electrical installer must have read and understood the manual and follow the instructions
provided.
The electrical installer must adhere to the valid national regulations in his/her country governing
the installation, functional test, repair and maintenance of electrical products.
The electrical installer must be familiar with and correctly apply the "five safety rules" (DIN VDE
0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts


Safety
Product manual 2CKA001373B5163
│
9
3.6 Safety instructions
Danger - Electric voltage!
Electric voltage! Risk of death and fire due to electric voltage of 100 … 240 V.
Dangerous currents flow through the body when coming into direct or indirect
contact with live components. This can result in electric shock, burns or even
death.
■Work on the 100 … 240 V supply system may only be performed by
authorised and qualified electricians.
■Disconnect the mains power supply before installation / disassembly.
■Never use the device with damaged connecting cables.
■Do not open covers firmly bolted to the housing of the device.
■Use the device only in a technically faultless state.
■Do not make changes to or perform repairs on the device, on its components
or its accessories.
■Keep the device away from water and wet surroundings.
Caution! - Risk of damaging the device due to external factors!
Moisture and contamination can damage the device.
■Protect the device against humidity, dirt and damage during transport,
storage and operation.
3.7 Cyber security
3.7.1 Stored data
No personal data are stored in this device.
Only device data of the coupled Bluetooth devices are stored in the device.
3.7.2 Recommended behaviour
■Unpair all Bluetooth devices before replacing or scrapping the device.
■Reset the device to the factory settings before replacing or scrapping the device.


Information on protection of the environment
Product manual 2CKA001373B5163
│
10
4 Information on protection of the environment
4.1 Environment
Consider the protection of the environment!
Used electric and electronic devices must not be disposed of with domestic
waste.
– The device contains valuable raw materials which can be recycled.
Therefore, dispose of the device at the appropriate collecting depot.
All packaging materials and devices bear the markings and test seals for proper disposal.
Always dispose of the packaging material and electric devices and their components via the
authorized collecting depots and disposal companies.
The products meet the legal requirements, in particular the laws governing electronic and
electrical devices and the REACH ordinance.
(EU Directive 2012/19/EU WEEE and 2011/65/EU RoHS)
(EU REACH ordinance and law for the implementation of the ordinance (EC) No.1907/2006).


Setup and function
Product manual 2CKA001373B5163
│
11
5 Setup and function
5.1 Functions
The device is a functional radio with various setting options and is installed flush-mounted in the
wall. The device offers you the following, for example:
■A Bluetooth interface for music replay from mobile devices and for sending music to mobile
devices.
■An AUX interface for music replay from external devices or for sending music to external
devices.
■A memory for up to 8 favourites (favourite stations).
■Receiving from DAB+ stations.
■Receiving from FM stations.
■Time and date display.
■An alarm call function.
■A sleep function.


Setup and function
Product manual 2CKA001373B5163
│
12
5.2 Possible combinations
8217 U-101
8223 U X
8222 EB X
8224 EB X
8225 EB X
8226 EB X
8226/10 EB X
8252-xxx-101 X
Table 1: Possible combinations
Notice
Connection of loudspeakers, see chapter 7.5.1 “Loudspeaker“ on page 21.


Technical data
Product manual 2CKA001373B5163
│
13
6 Technical data
Designation Value
Nominal voltage: 230 V AC, ±10%, 50 / 60 Hz
Display
■Colour display
■Visual range horizontal / vertical: +/- 80°
Power consumption during the idle state
■ECO mode: ≤0.4 W
■Comfort mode: ≤5 W
Output power of loudspeaker: 2 x 2 W (RMS)
Conductor cross section of screw-type terminals,
for power supply:
0.2 - 2.5 mm²,
AWG 14 to 26
Skinning length of screw-type terminals, for power
supply: 6 mm
Conductor cross-section of push-in terminal,
Loudspeaker/signal connection/antenna terminals
rigid/flexible:
0.2 - 1.5 mm²,
AWG 16 to 24
Skinning length of loudspeaker/signal
connection/antenna terminals: 8 mm
Admissible loudspeaker impedance: 4 to 8 Ω
Frequency range of audio: 250 to 15,000 Hz
Frequency range: of FM: 87.5 to 108 MHz
Frequency range of DAB+: 174 to 240 MHz
Transmission frequency: Bluetooth 2400 to 2483.5 MHz
Maximum transmission power: ≤10 dBm
Temperature range: 5 – +40°C
Storage temperature: -20 – +70°C
Protection type: IP 20
Table 2: Technical data


Connection, installation / mounting
Product manual 2CKA001373B5163
│
14
7 Connection, installation / mounting
7.1 Safety
Danger - Electric voltage!
Risk of death due to electrical voltage of 100 … 240 V during short-circuit in the
low-voltage conduit.
– Low-voltage and 100 … 240 V conduits must not be installed together in a
flush-mounted box!
Attention! - antenna signal is too weak!
If the antenna signal is too weak at the mounting location planned for the device,
it will be difficult or impossible to adjust the radio stations later.
– Before starting work, check whether the antenna signal is strong enough at
the location planned for the installation of the device.
– If in doubt, select a different mounting location, or connect an external
antenna..
7.2 Requirements for the electrician
Danger - Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
■Incorrect installation endangers your life and that of the user of the electrical
system.
■Incorrect installation can cause serious damage to property, e.g. due to fire.
The minimum necessary expert knowledge and requirements for the installation
are as follows:
■Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
■Use suitable personal protective clothing.
■Use only suitable tools and measuring devices.
■Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective earthing, necessary additional measures, etc.).


Connection, installation / mounting
Product manual 2CKA001373B5163
│
15
7.3 Mounting / dismantling
Caution! The device can sustain damage when coming into contact with
hard objects!
The plastic parts of the device are sensitive.
– Pull the attachment off only with your hands.
– Do not lever parts off with screwdrivers or similar hard objects.
Hinweis
Elektronische Geräte mit integriertem Schaltnetzteil können im Einzelfall
Empfangsstörungen verursachen, wenn diese in unmittelbarer Nähe zum Radio
montiert werden.
The flush-mounted insert must only be installed in flush-mounted boxes according to DIN
49073, Part 1, or suitable surface-mounted housings.
Mounting
To install the device, perform the following steps:
Fig. 1: Wall mounting: pulling off the attachment
1. Pull the attachment off.
– If the device is already mounted or assembled, pull the attachment off the flush-mounted
insert with the aid of the cover frame.

Connection, installation / mounting
Product manual 2CKA001373B5163
│
16
TOP
Fig. 2: Device in as-delivered state: pulling off the attachment
– If the device is in its as-delivered state, pull the attachment off the flush-mounted insert
with your hands.
– Pull the attachment off only with your hands!
– Do not lever parts off with screwdrivers or similar hard objects. This will damage the
device.
– When pulling off, first the resistance of the spring clamps must be overcome.
Fig. 3: Connection of loudspeaker cables / signal lines
2. Connect the loudspeaker cables and signal lines to the flush-mounted insert.
– Both connecting terminals are plug-in terminals.
– For the connection assignment, see chapter 7.4 “Electrical connection“ on page 20.
– The following options are available for connecting the plug-in terminals:
■Loudspeaker (for more detailed information see chapter 7.5.1 “Loudspeaker“ on
page 21)
■AUX input / AUX output (for more detailed information see chapter 7.5.2 “AUX
(Auxiliary)“ on page 23)
■Antenna (for more detailed information see chapter 7.5.3 “Antenna“ on page 25)

Connection, installation / mounting
Product manual 2CKA001373B5163
│
17
Fig. 4: Connecting the power supply cable
3. Connect the mains cables to the flush-mounted insert.
– Both connecting terminals are screw-type terminals.
– Screw-type terminals (max. 3.5 Lb-In, 0.4 Nm)
– For the connection assignment, see chapter 7.4 “Electrical connection“ on page 20.
Fig. 5: Mounting the flush-mounted insert
4. Mount the flush-mounted insert.

Connection, installation / mounting
Product manual 2CKA001373B5163
│
18
TOP
Fig. 6: Mounting the display
5. Plug the attachment together with the cover frame onto the flush-mounted insert.
– Ensure that the plug-in connection on the rear side does not get jammed.
– The arrow (TOP) must point upwards when plugging it.
– If mounting is difficult, check whether a burr has formed at the lock-in openings of the
flush-mounted insert and remove it.
The device is now mounted.


Connection, installation / mounting
Product manual 2CKA001373B5163
│
19
Dismantling
To dismantle the device, perform the following steps:
Dismantling is carried out in the reverse order to mounting.
Fig. 7: Loosening the plug-in terminals
■Loosen the plug-in terminals of the loudspeaker cables and signal lines on the flush-
mounted insert with the aid of a screwdriver.
– Press the terminal fixture into the device and pull the cable out.


Connection, installation / mounting
Product manual 2CKA001373B5163
│
20
7.4 Electrical connection
Note
An automatic circuit breaker must be available in the building installation.
– Automatic circuit breaker: 110 - 230 V AC, ±10%, 50 / 60 Hz max. B16A.
– Local regulations for electrical installations must be adhered to.
L
N
16A
L1N
L L RRRL
AUX
IN/OUT
CB D A
Fig. 8: Electrical connection
[A] Option: AUX terminals configured as input or output, see chapter 9.3.26 “Menu "Settings" -
"AUX"“ on page 78.
[B] Option: connection of an external antenna, see chapter 7.5.3 “Antenna“ on page 25.
[C] Option: simultaneous switch-on with room light.
[D] Variation: When connecting fluorescent lamps, energy-saving lamps or LED lamps, a 2-pole
switch is recommended.
