Bushnell PRIME User manual
Model #: LP1700SBL /LP1300SBL 6-19
LASER RANGEFINDER OWNER’S GUIDE
PRIME™
2
Thank you for purchasing your new
WARNING: As with any laser device, it is not recommended to directly view the emissions for long
periods of time with magni ed lenses.
INTRODUCTION
(for model LP1700SBL. Max range is 1300 y/1189 m for model LP1300SBL)
*Note: You will get both longer and shorter maximum distances depending on the refl ective properties of the particular
target and the environmental conditions at the time the distance of an object is being measured. The color, surface nish,
size and shape of the target all affect refl ectivity and range. The brighter the color, the longer the range. White is highly
refl ective, for example, and allows longer ranges than the color black, which is the least refl ective color. A shiny nish
provides more range than a dull one. A small target is more dif cult to range than a larger target. The angle to the target also
has an effect. Shooting to a target at a 90 degree angle (where the target surface is perpendicular to the fl ight path of the
emitted energy pulses) provides good range while a steep angle on the other hand, provides limited ranging. In addition,
lighting conditions (e.g. the amount of sunlight) will affect the ranging capabilities of the unit. The less light (e.g. overcast
skies) the farther the unit’s maximum range will be. Conversely, very sunny days will decrease the unit’s maximum range.
HOW OUR DIGITAL TECHNOLOGY WORKS
BATTERY ACTIVATION / BATTERY LIFE INDICATOR
Before first use:
NOTE: It is recommended that
the CR2 3-volt lithium battery be replaced at least once every 12 months. Insert it into the
compartment negative end first.
PARTS GUIDE
POWER/FIRE BUTTON
MONOCULAR EYEPIECE
BATTERY COMPARTMENT
COVER
LASER TRANSMIT/RECEIVE
LENSES
MONOCULAR OBJECTIVE LENS
MODE BUTTON
ENGLISH
3
2
1
3
67
48
5
9
10 11
12 13
14
15
16
Battery Level Indicator Icon (3):
Full charge
BASIC OPERATION
• While looking through the
•
•
•
•
•
DISPLAY INDICATORS/ICONS
•
•
•
•
•
•
•
•
TARGETING MODES
• Standard Mode with Automatic SCAN
• BullsEye™Mode with Automatic SCAN (6) -
4
• Brush™Mode with Automatic SCAN (7)
will be
TIP: While pressing the Fire button, you can move the device slowly from object to object and intentionally force the
laser to hit multiple objects to ensure that you are only displaying the furthest of the objects recognized by the laser.
Once the device has shut off, the unit will always default back to the last targeting mode used.
ANGLE RANGE COMPENSATION (ARC)
Your features
you the true
(14)(16)
o
USING THE SETUP MENU
The
(15)
ARC (ANGLE RANGE COMPENSATION) MODES
• REGULAR Mode
(14)(8)
(13)
confirm your selection
• BOW Mode
(1)
(13)
button will
Bow Mode Example
(14)
o
5
• RIFLE Mode(s)
blinking Rifle icon (2)
Knowing Which Ballistic Group To Select
www.bushnell.com
Popular Caliber & Load Combinations
Federal Cartridge.224 dia. 22-250 Rem, 55 gr. Bear Claw at 3600 fps G
Federal Cartridge.224 dia. 22-250 Rem, 60 gr. Partition at 3500 fps F
Remington Arms .224 dia. 22-250 Remington Arms , 50 gr. V-Max at 3725 FPS H
Remington Arms .224 dia. 22-250 Remington Arms , 55 gr. PSP at 3680 FPS G
Winchester .224 dia. 22-250 Rem, 55 gr. Ballistic Silvertip at 3680 FPS H
Winchester .224 dia. 22-250 Rem, 55 gr. PSP at 3680 FPS G
Federal Cartridge .277 dia. 270 Win, 150 gr. Ballistic Tip at 3060 fps F
Federal Cartridge .277 dia. 270 Win, 150 gr. Partition at 3000 fps F
Remington Arms .277 dia. 270 Win, 140 gr. PSPCL Ultra at 2925 FPS E
Remington Arms .277 dia. 270 Win, 150 gr. SPCL at 2850 FPS D
Winchester .277 dia. 270 Win, 150 gr. Partition Gold at 2930 FPS E
Winchester .277 dia. 270 Win, 150 gr. PP-Plus at 2950 FPS E
Federal Cartridge .308 dia. 30-06 Spring, 180 gr. AccuBond at 2700 FPS D
Federal Cartridge .308 dia. 30-06 Spring, 180 gr. Bear Claw at 2700 FPS D
Line of Sight = 32Y
Degree of Angle = -52°
Compensated Distance = 23Y`
6
Remington Arms .308 dia. 30-06 Springfield, 180 gr. A-Frame at 2700 FPS D
Remington Arms .308 dia. 30-06 Springfield, 180 gr. BRPT at 2700 FPS D
Winchester .308 dia. 30-06 Sprg, 180 gr. FailSafe at 2700 FPS D
Winchester .308 dia. 30-06 Sprg, 180 gr. Partition Gold at 2750 FPS D
Federal Cartridge.308 dia. 300 WSM, 180 gr. AccuBond at 2960 fps F
Federal Cartridge.308 dia. 300 WSM, 180 gr. Bear Claw at 3025 fps F
Winchester .308 dia. 300 WSM, 180 gr. Ballistic Silver Tip at 3010 FPS F
Winchester .308 dia. 300 WSM, 180 gr. Fail Safe at 2970 FPS F
Remington Arms .308 dia. 300 R.S.A.U.M., 180 gr. PSPCL Ultra at 2960 FPS E
Remington Arms .308 dia. 300 Wby Mag, 180 gr. PSPCL at 3120 FPS F
What if my caliber/load is not listed?
(13)toggle
(14)
*Note: if the unit of
measure was set to Meters (M), the bullet drop will be calculated and displayed in CM (centimeters) rather than inches.
Rifle Mode Example
Line of Sight = 376 Yards
Degree of Angle = -33°
Holdover/Bulletdrop =28 Inches
-33oAngle / 28 inch Holdover
7
• Reticle Select:
(this is the
default)
CLEANING AND GENERAL CARE
•
•
•
TROUBLESHOOTING
Never disassemble your laser rangender. Irreparable damage can result from unauthorized service attempts,
which also void the warranty.
If unit does not turn on, display does not illuminate:
•
•
If unit powers down (display goes blank when attempting to power the laser):
•
If target range cannot be obtained:
•
•
•
•
NOTE: The last range reading does not need to be cleared before ranging another target. Simply aim at the new target
using the display reticle, depress the power button and hold until new range reading is displayed.
SKU
Mag x Obj Lens Diam.
Max Range (Y/M)
(Reective Target)
Range to Tree (Y/M)
Range to Deer (Y/M)
Ranging Accuracy
Optical Coatings
Length (in/mm)
Weight (oz /g)
LP1700SBL 6x 24mm 1,700/1,554 1,000/914 700/640 +/- 1 yd Fully-multi coated,
EXO Barrier™
4.3/109 6.0/170
LP1300SBL 6x 24mm 1,300/1,189 800/732 600/549 +/- 1 yd Fully-multi coated,
EXO Barrier™
4.3/109 6.0/170
Technical Specications
8
website at www.bushnell.com/warranty
Bushnell Bushnell
LIFETIME
IRONCLAD
WARRANTY
WARNING: This product uses a Lithium based battery. Lithium batteries can overheat and cause
damage if physically abused. Do not use batteries that are damaged or show signs of physical wear.
9
Disposal of Electric and Electronic Equipment
(Applicable in the EU and other European countries with separate collection systems)
This equipment contains electric and/or electronic parts and must therefore not be disposed of as normal household waste. Instead, it
should be disposed at the respective collection points for recycling provided by the communities. For you, this is free of charge.
If the equipment contains exchangeable (rechargeable) batteries, these too must be removed before and, if necessary, in turn be
disposed of according to the relevant regulations (see also the respective comments in this unit’s instructions).
Further information about the subject is available at your community administration, your local waste collection company, or in the
store where you purchased this equipment.
FDA SAFETY
Class 1 laser product in accordance with IEC 60825-1:2007.
Complies with 21 CFR 1040.10 and 1040.11 for laser products except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
Caution: There are no user controls, adjustments or procedures. Performance of procedures other than those specied herein may result
in access to invisible laser light.
Industry Canada Statement :
This device complies with ISED’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) le dispositif ne
doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
Radiation Exposure Statement / Déclaration d’exposition aux radiations :
This device complies with the Industry Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for the intended operation as described in this manual.
Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user’s body or if the device is set to a lower output power if such function is available.
Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l’appareil peut être conservé aussi loin que possible
du corps de l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.
Patent ’s: ,, | ,,
Patent Pending: ,,
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. Specifications and designs are subject to change
without any notice or obligation on the part of the manufacturer.
Important Note: Radiation Exposure Statement
• This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator
and your body.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Table of contents
Other Bushnell Measuring Instrument manuals
Bushnell
Bushnell TOUR V4 SHIFT User manual
Bushnell
Bushnell YARDAGE PRO SPORT 450 User manual
Bushnell
Bushnell 1K User manual
Bushnell
Bushnell Legend 204100 User manual
Bushnell
Bushnell Hybrid 201951 User manual
Bushnell
Bushnell Bone Collector LBC1000 User manual
Bushnell
Bushnell Tour V2 User manual
Bushnell
Bushnell Neo+ Handheld User manual
Bushnell
Bushnell Scout 1000 Rangefinder User manual
Bushnell
Bushnell 20-0002 User manual
Bushnell
Bushnell GOLF Tour L7 201870A User manual
Bushnell
Bushnell Tour Z6 User manual
Bushnell
Bushnell NEO GHOST User manual
Bushnell
Bushnell 20-5103 User manual
Bushnell
Bushnell TOUR X Jolt User manual
Bushnell
Bushnell NEO GHOST User manual
Bushnell
Bushnell Tour Z6 Jolt Slope User manual
Bushnell
Bushnell NEO GHOST User manual
Bushnell
Bushnell Yardage Pro 20-0500 User manual
Bushnell
Bushnell 20-0880 User manual
