Bushnell Pro X7 Jolt User manual

1
Model: 201400, 201401
LIT. # 11-13 ENGLISH

4
Congratulations on your purchase of the Bushnell® Pro X™ Laser Rangender, our top of the line laser rangender
for golfers and used by more golf professionals than any other brand. e Pro X™ is a precision Laser Rangending
optical instrument designed to provide many years of enjoyment. is booklet will help you achieve optimum
performance by explaining its adjustments and features as well as how to care for this precise laser rangending optical
instrument. To ensure optimal performance and longevity, please read these instructions before using your Pro X™.
INTRODUCTION
Your Bushnell® Pro X™ is an advanced premium laser rangender comprised of Digital Technology allowing range
readings from - yards/- meters, and combines the best of a compact monocular with the new Vivid Display
Technology™. Measuring . x . x . inches, the -ounce Pro X™ delivers superb and accurate range performance to
+/- one yard. e Pro X™ features PinSeeker™ technology with JOLT, allowing the golfer to easily and quickly “zero”
in on the ag without acquiring background targets, Superb Optical Quality, &  Waterproof Construction.
Built-In Accessory Mount
Posi-Thread™Battery Door
100% Waterproof
Vivid Display Technology™
7x Magnification
Ranging
• 1760 Yards Reflective
• 1000 Yards to Trees
• 550 Yards to Golf Flag
Adjustable Diopter Setting
RainGuard HD
PinSeeker™with Jolt Mode
E.S.P.2™- Extreme. Speed. Precision.
• Gen 2 Turbo Processor Provides Faster Acquisition
• Provides 1/2 Yard Accuracy; 1/10 Precision from 5–125 Yards

5
HOW OUR DIGITAL TECHNOLOGY WORKS
e Pro X™ emits invisible, eye safe, infrared energy pulses. e Pro X™ Advanced Digital microprocessor and ASIC
chip (Application-Specic Integrated Circuit) results in instantaneous and accurate readings every time. Sophisticated
digital technology instantaneously calculates distances by measuring the time it takes for each pulse to travel from the
rangender, to the target, and back.
RANGING ACCURACY
e ranging accuracy of the Pro X™ is plus or minus one yard / meter under most circumstances. e maximum
range of the instrument depends on the reectivity of the target. e maximum distance for most objects is 
yards/ meters while for highly reective objects the maximum is  yards/ meters.
Note: You will get both longer and shorter maximum distances depending on the reflective properties of the particular target and the environmental
conditions at the time the distance of an object is being measured. The color, surface finish, size and shape of the target all affect reflectivity and
range. The brighter the color, the longer the range. Red is highly reflective, for example, and allows longer ranges than the color black, which is the
least reflective color. A shiny finish provides more range than a dull one. A small target is more difficult to range than a larger target. The angle to
the target also has an effect. Shooting to a target at a 90 degree angle (where the target surface is perpendicular to the flight path of the emitted
energy pulses) provides good range while a steep angle on the other hand, provides limited ranging. In addition, lighting conditions (e.g. the amount
of sunlight) will affect the ranging capabilities of the unit. The less light (e.g. overcast skies) the farther the unit’s maximum range will be. Conversely,
very sunny days will decrease the unit’s maximum range.
E.S.P.2™ (Extreme. Speed. Precision. 2nd generation), our advanced second generation ranging technology, provides the fastest, most
accurate ranging measurement based on target conditions. The laser analyzes multiple individual measurements to the target and calculates and
displays the best possible result. Target variations such as reflectance, shape and color can affect the accuracy of a laser measurement, but E.S.P.2™
automatically assesses the conditions and improves the measurement up to 1/2 Yard Accuracy whenever possible from 5–125 yards. When this occurs,
display readout precision will be refined to 1/10th yard.

6
GETTING STARTED
OPERATIONAL SUMMARY
While looking through the Pro X™, depress the power button once to activate the Vivid Display. Place the aiming
circle (located in the center of the eld of view) upon a target at least  yards away, depress and hold the power button
down until the range reading is displayed near the bottom of the in-view display. Crosshairs surrounding the aiming
circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the power button.
e crosshairs surrounding the aiming circle will disappear once the power button has been released (i.e. the laser is
no longer being transmitted).
Note: Once activated, the display will remain active and display the last distance measurement for 10 seconds. You can depress the power button again
at any time to distance to a new target. As with any laser device, it is not recommended to directly view the emissions for long periods of time with
magnified lenses. The maximum time the laser is transmitted (fired) is 10 seconds. To re-fire, press the button down again.
ADJUSTING THE EYEPIECE
Your Pro X™ is constructed with a twist-up eyepiece designed for comfort and to exclude extraneous light. For users
without eyeglasses, rotate the eyecup counter clockwise while pulling up until it locks into the fully “up” position. e
Pro X™ provides extra-long eye-relief. If you wear glasses, make sure the eyecup is in the down position as this will
bring your eye closer the eyepiece lens allowing you to see a full eld of view. To lower the eyecup from the full “up”
position, rotate clockwise while pushing down slightly. It is also possible to set the eyecup to positions “In between”,
fully up and full down, which may suit some individuals better. e Pro X™ is also equipped with an adjustable
eyepiece (+/-  Diopter Adjustment) that allows one to focus the VDT™ display relative to the image. Simply rotate
the diopter setting until the VDT™ is in focus.

7
VIVID DISPLAY INDICATORS
Your Pro X™ Vivid Display™ incorporates the following illuminated indicators:
PinSeeker™ Indicator ()
Aiming Reticle ()
Battery Life Indicator ()
Active Laser ()
Distance Displayed in Yards/Meters ()
BATTERY LIFE INDICATOR
Battery Indicator:
Full charge
/ battery life remaining
/ battery Life remaining
Battery Indicator Blinks - Battery needs to be replaced and unit will not be operable.
INSERTING THE BATTERY
Remove the Posi-read™ battery door by lifting the battery door tab and then rotating counter clockwise. Insert a
(CR123) -volt lithium battery into the compartment negative end rst, then replace battery cap.
Note: It is recommended that the battery be replaced at least once every 6 months.
ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired,
you can release the power button. e crosshairs surrounding the circle will disappear once the power button has been
released (i.e. the laser is no longer being transmitted).
103
PinSeeker beyond E.S.P range— 20196, 205107, 205108
PinSeeker & E.S.P—201960
PinSeeker & E.S.P “Play-As”PinSeeker Slope & E.S.P
3
4
1
5
2

8
PINSEEKER™
Ever have trouble getting distance to the ag? is advanced mode allows easy acquisition of the ag without
inadvertently getting distances to background targets (i.e. trees) that have stronger signal strength.
For ease of use, the device will always be in PinSeeker™Mode.
To use, align the aiming circle reticle onto the ag that you want distance to. Next, press and hold the POWER button
and move the laser slowly over the ag or desired object until a circle surrounds the ag indicator. If the laser beam
recognized more than one object (i.e. ag and background trees), distance of the ag will be displayed and a circle will
surround the PinSeeker™ indicator informing the user that distance to the ag (i.e. closer object) is being displayed in the
VDT™ (as seen below). ere may be times when only the laser beam only sees one object in its path. In this case, the
distance will be displayed, but because more than one object was not acquired, a circle will not surround the ag indicator.
TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to ensure that
you are only displaying the closest of the objects recognized by the laser. Once the device has shut off, the unit will always default back to the last mode used.
PINSEEKER™WITH SLOPE +/-™
e advanced patented SLOPE mode is available only on model  (Pro X™ Slope +/-™). is model features a
built-in accelerometer-based inclinometer that digitally displays the exact slope angle from - to + degrees of elevation
and is +/- . degree accurate. e Slope +/-™ mode will automatically compute an angle compensated range based upon
distance and slope angle determined by the laser rangender and built-in inclinometer. is data is then combined with
internal algorithmic formulas dealing with average club use and ball trajectories. e angle compensated range provides
direction on how to play the shot (i.e. add distance if an incline, subtract distance if a decline).
ACTIVATING SLOPE MODE (Model 201401 only)
e Pro X™ Slope +/-™ was especially designed with golfers in mind. e SLOPE mode allows you to display the angle
and “Play-As” distance. To activate or deactivate this mode, press the POWER button once to turn the unit ON. en
while looking through the eyepiece, press the MODE button and quickly release.

9
HOW TO USE SLOPE +/-™
Once in this mode, you will see a “ ° ” in the eld of view informing you that you are in the Slope +/- Mode. Press
the POWER button to obtain distance to the ag or other objects. Once the range is displayed, continue to hold the
POWER button down for approximately  seconds while holding the aiming circle on the ag and keeping the unit
as steady as possible so as to allow the inclinometer enough time to measure slope. en release the POWER button.
Once you have released the power button, a degree of angle and compensated range will be displayed beneath the
standard distance as seen below.
In this example, the true distance is  yards, slope is + degrees, and the compensated range is  yards. e “ ”
symbol means “Play-As”, so instead of playing as  yards, “play-as”  yards.
THE ADVANTAGE OF SLOPE +/-™
e distance to ag A in the drawing below is  yards. It is also 
yards to ag B although it is on a slope. However, if you were to play this
hole as  yards, the ball (X) would fall short of the hole/ag because
you did not take slope into account.
THE TRUTH ABOUT SLOPES
Trying to determine slope angle with the naked eye can be rather deceiving. Most are not well versed to accurately determine
slope angle. For example, most golf courses average slope is approximately  degrees. A large slope at a golf course is generally
no more than  degrees. Of course this can vary, and that is why this device will measure slope from - to  degrees.
Some real world examples may help clarify. A moderate roof pitch is /, which means that the roof rises six inches
for every  inch horizontal distance. at equates to . degrees. You can scramble up this pitch when hanging
Christmas lights, but climbing that slope for the distance of a good golf shot on a course would be exhausting. To
retrieve a  yards shot, you would climb  feet up!
162 YARDS
162 YARDS
X
4°

10
Golf Example: Let’s say you are a strong golfer with a  yard shot. At a  degree slope the Pin would be  feet
above you. In other words, you be driving the ball to the top of a  story building!!!
NOTE: For your convenience, the Slope +/-™Mode also contains the PinSeeker®Mode/feature.
MENU SETUP
DISPLAY BRIGHTNESS
Vivid Display Technology™ dramatically improves contrast, clarity and light transmission while increasing brightness
of the digital readout, making distance readings legible in low light environments. ere are four intensity settings to
choose from and this is the rst setting within the SETUP menu. Press the MODE button for  seconds to get into
the SETUP menu. e existing brightness setting will be ashing (i.e. BRT, BRT, BRT, or BRT), pressing the
MODE button will toggle between the four brightness settings. “BRT” is the lowest intensity while “BRT” is the
brightest. Simply press the MODE button until the desired brightness setting is displayed and select by pressing and
releasing the POWER button.
UNIT OF MEASURE OPTIONS
e Pro X™can be used to measure distances in yards or meters. e unit of measure indicators are located in the
lower right portion of the VDT™. ere are two measuring settings to choose from and this is the second setting
within the SETUP menu. Look through the eyepiece, depress the “MODE” button (left side of the eyepiece) and
hold it down for approximately  seconds to get into the SETUP menu. Depressing the MODE button will toggle
through the brightness settings. If you are changing from yards to meters, a change in unit of measure will be
indicated by the illumination of the M for meter indicator while the Y for Yard indicator is turned o. If you are
changing from meters to yards, the opposite will occur. e Pro X™ will return to the last unit of measure setting
used each time the unit is turned on.

11
ENABLING JOLT FEATURE
e Pro X™ features PinSeeker™ technology with JOLT, allowing the golfer to easily and quickly “zero” in on the
ag without acquiring background targets. e Jolt feature provides a short vibration to indicate when Pinseeker has
triggered. is Jolt feature may be disabled in the setup menu. Holding the mode button will put the unit into the
setup mode. e Jolt enable/disable is the third option, after the brightness setting and yard/meter selection. Pressing
the re button when the display indicates “JLT on” will enable the Jolt feature. Pressing the re button when the
display indicates “JLT o: will disable the Jolt feature. In the settings mode the mode button toggles between “JLT
on” and “JLT o”.
ACCESSORY MOUNT
Molded into the bottom of the product is a threaded accessory mount that will allow you to attach the following
Bushnell® Golf Accessories:
• Golf Cart Mount: Attaches the rangender to your golf cart for easy access. Quick release clamp attaches to golf
cart and can be easily removed afterwards.
• Push/Pull Cart Monopod: Steady your hand with this telescoping monopod. Simply attach rangender to the
monopod and insert into cart umbrella holder.
• 360R Retractor: Attaches the rangender to your golf bag for easy access while walking the course.
CLEANING
Gently blow away any dust or debris on the lenses (or use a soft lens brush). To remove dirt or ngerprints, clean
with a soft cotton cloth, rubbing in a circular motion. Use of a coarse cloth or unnecessary rubbing may scratch the
lens surface and eventually cause permanent damage. For a more thorough cleaning, photographic lens tissue and
photographic-type lens cleaning uid or isopropyl alcohol may be used. Always apply the uid to the cleaning cloth
– never directly on the lens.

12
TWO-YEAR LIMITED WARRANTY
Your Bushnell® laser rangender is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a
defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. is warranty does
not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell® Authorized Service
Department.
Any return made under this warranty must be accompanied by the items listed below:
. A check/money order in the amount of . to cover the cost of postage and handling
. Name and address for product return
. An explanation of the defect
. Proof of Date Purchased
. Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below:
IN U.S.A. Send To: IN CANADA Send To:
Bushnell® Outdoor Products Bushnell® Outdoor Products
Attn.: Repairs Attn.: Repairs
 Cody  Great Gulf Drive, Unit B
Overland Park, Kansas  Vaughan, Ontario LK W
For products purchased outside the United States or Canada, please contact your local dealer for applicable warranty information.
In Europe you may also contact Bushnell® at:
Bushnell Germany GmbH
European Service Centre
Mathias-Brüggen-Str. 
D- Köln
GERMANY
Tél: +  -
Fax: +  -
is warranty gives you specic legal rights.
You may have other rights which vary from country to country.
© Bushnell® Outdoor Products

13
SPECIFICATIONS
Dimensions 1.7 x 5.1 x 3.7 inches
Weight 12 oz.
Ranging Accuracy Up to ½ yard accuracy from 5-125 Yards, +/-1 yard accuracy from 126-1760 Yards
Range 5-1760 Yards / 5-1609 Meters
Magnification 7x
Objective Diameter 26 mm
Optical Coatings Fully Multi-Coated
Display Vivid Display Technology™
Power Source 3-volt lithium (CR123)
Field Of View 340 ft. @ 1000 yards
Extra Long Eye Relief 19 mm
Exit Pupil 3.7 mm
100% Waterproof Yes
Built-In Accessory Mount Yes
Includes Carrying Case and Strap
Patent #’s: 6,445,444 | 5,612,779 | 6,057,910 | 6,226,077 | 5,652,651 | 7,920,080 | 7,619,548 | 7,349,073 |
7,239,377 (201401 only) | 7,859,650 (201401 only) | 7,535,553 (201401 only)

14
TROUBLE SHOOTING TABLE
If unit does not turn on VDT™ does not illuminate:
• Depress power button.
• Check and if necessary, replace battery. If unit does not respond to key presses, replace the battery with a good
quality CR -volt Lithium battery.
• Ensure the display is on the brightest setting while in sunlight. While pressing Power Button, cover the objective
lenses to determine if the display is on. See the display brightness setting instructions on Page .
If unit powers down (display goes blank when attempting to power the laser):
• e battery is either weak or low quality. Replace the battery with a good quality CR -volt Lithium battery.
If target range cannot be obtained:
• Make sure VDT™ is illuminated.
• Make sure that the power button is being depressed.
• Make sure that nothing, such as your hand or nger, is blocking the objective lenses (lenses closest to the target)
that emit and receive the laser pulses.
• Make sure unit is held steady while depressing power button.
NOTE: The last range reading does not need to be cleared before ranging another target. Simply aim at the new target using the VDT™’s reticle, depress
the power button and hold until new range reading is displayed. Specifications, instructions, and the operation of these products are subject to change
without notice.

15
FCC NOTE
is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
 of the FCC Rules. ese limits are designed to provide reasonable protection against harmful interference in a
residential installation. is equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device
pursuant to Subpart B of Part  of FCC Rules. Specications and designs are subject to change without any notice
or obligation on the part of the manufacturer.
FDA SAFETY
Class  laser product in accordance with IEC -:.
Complies with  CFR . and . for laser products except for deviations pursuant to Laser Notice No. ,
dated June , .
Caution: There are no user controls, adjustments or procedures. Performance of procedures other than those specified herein may result in access to
invisible laser light.

16
Disposal of Electric and Electronic Equipment
(Applicable in the EU and other European countries with separate collection systems)
This equipment contains electric and/or electronic parts and must therefore not be disposed of as normal household waste.
Instead, it should be disposed at the respective collection points for recycling provided by the communities. For you, this is
free of charge.
If the equipment contains exchangeable (rechargeable) batteries, these too must be removed before and, if necessary, in turn
be disposed of according to the relevant regulations (see also the respective comments in this unit’s instructions).
Further information about the subject is available at your community administration, your local waste collection company,
or in the store where you purchased this equipment.