C. Crane CCWiFi User manual

INSTRUCTION MANUAL
PLEASE READ ALL THE INSTRUCTIONS
COMPLETELY BEFORE USE
AND SAVE THIS MANUAL
FOR FUTURE REFERENCE
Internet Radio

Before Use
Please read I PORTANT SAFETY INSTRUCTIONS on page 33
before use. It is important to read and understand all instructions.
Keep these precautions and instructions where all who use this radio
will read them.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD,
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
THE LI HTNIN FLASH AND ARROWHEAD WITHIN THE
TRIAN LE IS A WARNIN SI N ALERTIN YOU OF
“DAN EROUS VOLTA E” INSIDE THE RADIO.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE THE RADIO BACK. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICIN TO QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION POINT WITHIN THE TRIAN LE IS A
WARNIN SI N ALERTIN YOU OF IMPORTANT
INSTRUCTIONS ACCOMPANYIN THIS RADIO.


Ꮨ
Ꮨ
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Page 2 CC WiFi
For your future reference:
Serial No. Date of Purchase
Name & Address of Dealer
The box should contain the CC WiFi Radio, AC Adapter and this man-
ual. If anything is missing or damaged, please contact your dealer
immediately. We recommend you keep the box in the unlikely event
your radio needs to be serviced.
Unpacking
Copyright © 2008 by
C. Crane Company, Inc.
1001 Main St, Fortuna, CA 95540
Phone: [phone] Web: ccrane.com
All rights reserved. No part of this booklet may be reproduced, in any form or
means whatsoever, without permission in writing from C. Crane Company, Inc.

CC WiFi Page 3
Table of Contents
Unpacking ................................................................................ 2
Location of Controls ........................................................... 4-5
Getting Started
Turning the Radio On ................................................ 6
Scanning for Wireless Networks ............................. 7
Connecting to a Wireless Network .......................... 7
Entering Your WEP or WPA Key .............................. 8
Connecting to Network Using Ethernet Cable ...... 10
Choosing a Radio Station ..................................................... 11
Changing the Volume ............................................................ 13
Storing a Station as a Preset ................................................ 13
Play a Stored Radio Station Preset ..................................... 14
enu Time Out ...................................................................... 14
Setting the Time and Date .................................................... 15
Setting the Alarm ................................................................... 16
Setting the Sleep Timer ......................................................... 18
edia Player Functions ........................................................ 19
Configure enu Options ....................................................... 24
Configuring “ y Stuff” .......................................................... 26
Configuring “ y Stations” .................................................... 26
Adding a Custom Stream to “ y Streams” ......................... 27
Help Pages ............................................................................. 28
Safety Instructions ................................................................. 33
enu Flow Chart ................................................................... 34
Location of CC WiFi Radio Serial Number ........................... 36
Software License Information ............................................... 36
Thank you for choosing the CC WiFi radio. Read this manual carefully
to get the best performance from this unit.

Page 4 CC WiFi
Location of Controls — Front and Back of Radio
Q LCD Display
W PLAY/PAUSE/STOP or
PRESET #1
E PREVIOUS or PRESET #2
R NEXT or PRESET #3
T Remote Sensor
Q
W
E
R
T
Y
U
I
O
P
Y DIAL/VOLUME/SELECT
U REPLY
I BACK
O POWER ON/OFF
P Speaker
{ DC Power Jack
}Line Out Jack
{
}
q
w
q Headphone Jack
w Ethernet Jack

CC WiFi Page 5
Location of Controls — Remote Control
e POWER: Switch radio
ON/OFF
r 1-9: Store presets and recall
functions
t MUTE: Mute the audio
y REP Y: Reserved for
future services
u STORE: Store up to 99
radio stations
i --/-: Used for presets 10 and
above
o RECA : Play pre-set
stations
p + or - VO : Adjust volume
[ P AY/PAUSE: Play or pause
track
] STOP: Stop track play. Press
and hold to delete a track
from the playlist
A NEXT: Play next track
S BROWSE: View tracks in
playlist
D UP/DOWN: Scroll through
options
F SE ECT: Select a displayed
option
G MODE: Switch between
Repeat and Shuffle modes
H PREV: Play previous track
J BACK: Reverts back to the
previous menu or option
e
t
u
y
i
r
S
A
p
[
F
G
H
G
D
o
]
Buttons 23-26 and 29-30 are used only in Media Player
mode while playing tracks from your computer.

Page 6 CC WiFi
Getting Started – Turning On Your WiFi Radio
Note: Configuring a WiFi radio is similar to navigating through a cell
phone menu.
Plug the power adapter cube into a 120V AC power outlet. Connect
the power adapters small plug into the jack on the back of the radio
that is labeled “DC IN 7.5V”.
Caution: Use only the power adapter supplied with the radio.
Connecting a power adapter other than the one that was sup-
plied with your radio could cause permanent damage to the
radio and may be hazardous.
After a few seconds the display on the front of the radio will light up
and show:
Followed by:
CC WiFi Radio
Reciva Enabled
ARM Powered
Followed by:
Followed by:
Initializing
Network
<Scan for Networks >
Enter Network

CC WiFi Page 7
Scanning for Wireless Networks
Connecting to a Wireless Network
Scanning
No networks
found
When the radio finds wireless networks, it will show the network
names (also called the ESSID) in the display screen.
Note: You can always use the BACK button to start over at the previ-
ous screen.
The first two wireless networks will show in the display after the wire-
less network scan. There may be more wireless networks to choose
from by further rotating the dial.
When <Scan for Networks> is displayed, press “SELECT” by press-
ing “in” the main dial (the main dial should click when pressed in).
The display will show:
If the radio cannot find any wireless networks, then the display will
show:
If no networks are found, see pa e 28 for troubleshootin assistance.
Example: <WiFi Network 1 >
WiFi Network 2
Example: <WiFi Network 2 >
Your Network

Page 8 CC WiFi
Connecting to a Wireless Network
Entering Your WEP or WPA Key (Wireless Password)
<END <> A BCDE>
To connect to your wireless network, align your network name
between the brackets and select it by pushing the dial in.
Need Help?: refer to help pa e 28 for help findin which SSID
(Network Name) is yours.
Need Help?: refer to help pa e 28 for help findin your WEP or WPA
Key.
After a few seconds the display will go into a password entry mode.
This mode contains upper case letters, lower case letters, numbers,
and special characters.
Notice that the letter “A” is separated from the other characters in the
However, if the screen displays:
Enter WEP Key Enter WPA Key
or
you must enter the correct WEP or WPA wireless encryption key
(Wireless Password) to proceed.
Note: Take note which type of key your network requires for future
reference.
If the display
shows:
then continue
on to page 11.
Connecting to
Network

CC WiFi Page 9
Entering Your WEP or WPA Key (Wireless Password)
center of the display. Rotate the dial and you will see how the center
character is always separated from the other characters. Continue
rotating the dial until the first character of your WEP or WPA password
is in the center of the display. Select it by pressing the main dial in.
After you have selected the first character of your password, it will
appear below.
<ABCDE F GHIJ>
_
<ABCDE F GHIJ>
F _
Turn the dial to the next character in the password and SELECT.
Repeat this process until your entire wireless password is entered on
the lower line.
<XYZab c defg>
Frank12abc _
Note: WEP passwords use numbers 0-9 and upper case letters A-F.
WPA passwords are case sensitive to upper and lower case letters,
so you must enter them exactly.
Example:
After the final character is entered, turn the dial until “END” shows in
the middle of the display — press the dial to select.
<( )“ END ghA>

Page 10 CC WiFi
<Stations >
Configure
Entering Your WEP or WPA Key (Wireless Password)
Connecting to a Network Using Ethernet Cable (optional)
When using an ethernet cable to connect, little setup is required.
1. While the radio is unplugged from power, connect a standard Cat5
or Cat6 Ethernet cable (not included with radio)
to an open LAN port on your router. The LAN
ports are the ones typically numbered 1-4 on
the back of your router.
Note: Ethernet cables can be purchased from
C. Crane Company or your local electronics store.
Then:
Need Help?: refer to help pa e 29 for troubleshootin connection
problems.
When finished, the radio automatically goes to the “primary menu”
that contains four options: STATIONS, CONFI URE, MEDIA PLAY-
ER, and ALARM CLOCK.
Note: A chart containing a menu tree flow chart is located on page 34.
To begin choosing stations skip to page 11.
Station Update
From Reciva
Connecting to
Network
The display will show “Connecting to network” as the radio connects
to the WiFi network.

CC WiFi Page 11
Choosing a Radio Station
1. From the primary menu, choose “Stations” by turning the dial until
brackets are positioned on both sides. Press the dial to select.
2. Next, turn the dial to choose a radio station from ether the
“Location” or “ enre” menu. Press the dial to continue into the
selected menu.
Note: The “Location” menu enables you to choose a radio station
from a particular continent then country. The “ enre” menu enables
you to choose a radio station by categorized content – for example:
“Dance, Classical, Rock, Talk” etc.
Or
<Stations >
Configure
<ocation >
Genre
ocation
<Genre >
Connecting to a Network Using Ethernet Cable (optional)
After the radio successfully connects to your router it will automatically
go to the “primary menu” that contains four options: STATIONS, CON-
FI URE, MEDIA PLAYER, and ALARM CLOCK.
Need Help?: refer to help pa e 30 for troubleshootin connection
problems.
Note: A chart containing a menu tree flow chart is located on page 34.
Need Help?: To find which enre or location contains your favorite
2. Connect the opposite end of the Ethernet cable to the Ethernet
port on the back of your radio.
3. Plug in the power cord to the radio.
After a few seconds the connection light will flash indicating a good
connection

Page 12 CC WiFi
Choosing a Radio Station
Or
By Location:
3. After selecting a “Location” or “ enre”, turn the dial to view all
locations or genres. Selections are listed in alphabetical order.
Press the dial to continue into the selected menu.
Radio stations are listed in alphabetic order, so you may need to turn
the dial many times until your desired station is reached.
5. Press the dial to listen to a selected station.
The display will show “Connecting” followed by “Buffering”. The con-
necting process can sometimes take up to a minute or two, depending
on the speed of the station.
<USA >
Venezuela
Example:
4. After loading, the first two radio stations will show in the display
screen.
<101 RU Classic >
101 RU Humor
Example: <KGO-AM 810 >
KGUM 570 AM
By enre: <News Talk >
News Updates
station, refer to help pa e 31.

CC WiFi Page 13
Choosing a Radio Station
Changing the Volume
Example: <KGO-AM 810 >
Connecting /
Followed by
<KGO-AM 810 >
Buffering 50%
Once the station is fully buffered, it will begin to play. You may need to
turn up the volume by using the same dial.
When a station is playing, the following information will show on the
display (for example):
Station Name: BBC Radio 1
Audio quality, and Audio format: 32 kbps WMA
Player that the radio is using: Real Enabled
You can change the volume by turning the dial clockwise to increase
the volume and counterclockwise to decrease the volume. The display
shows the volume bar. You cannot change the volume when you are
in a menu, except when using the remote control. After a station is
selected and begins to play, you can then change the volume with the
main dial.
Store a Radio Station as a Preset
A. Using the Controls on the Front of the Radio to Play
Presets 1-3.
While a radio station is playing, press and hold one of the preset
buttons for three seconds or until the display screen shows

Page 14 CC WiFi
Store a Radio Station as a Preset
“Assigned to Preset”.
B. Using the Remote Control to Store Presets 1-9.
While a radio station is playing, press and hold the preset number
on the remote control that you want the station to be stored to.
After three seconds the display screen will show “Assigned to
Preset”.
C. Using the Remote Control to Store Presets 10-99.
While a radio station is playing, press the STORE button, then the
-/-- button, and then enter your desired preset number. The display
screen will show “Assigned to Preset”.
Play a Stored Radio Station Preset
A. Using the Controls on the Front of the Radio to Play
Presets 1-3.
Briefly press and release the preset button assigned to the station
you want.
B. Using the Remote Control to Recall Presets 1-9.
Briefly press and release the preset button assigned to the station
you want.
C. Using the Remote Control to Recall Presets 10-99.
Briefly press the RECALL button, then the --/- button, and then
enter your desired preset number 10-99.
enu Time-Out
When a radio station is playing — if BACK or SELECT is pressed, the
radio will go into menu selection mode. If no radio controls are used
within ten seconds, the radio will “time-out” and go back to the cur-
rently playing radio station.

CC WiFi Page 15
Setting the Time and Date
Note: At any point, you can use the BACK button to start over at the
previous screen.
1. If you are currently listening to a radio station, briefly press the dial
once to access the primary menu. You can also access the
primary menu by repeatedly pressing the BACK button.
The Primary menu contains contains four options: “Stations”,
“Configure”, “Media Player”, and “Alarm Clock”.
2. Turn the main dial until “Configure” shows in brackets — press the
dial to select.
Stations
<Configure >
3. Turn the dial clockwise to “Clock Setup” — press the dial to select.
Register
<Clock Setup >
5. Turn the dial until the hour setting is correct — press the dial to
select.
6. Turn the dial until the minute setting is correct — press the dial to
select.
<Set Time/Date >
Clock Format
Set Time
12:00 AM
7. Turn the dial until the day of the month is correct — press the dial
to select. Follow the same method for setting the month and year.
4. Turn the dial to “Set Time/Date” — press the dial to select..

Page 16 CC WiFi
Setting the Time and Date
Setting the Alarm
3. Turn the dial until “Set Alarms” shows in brackets — press the dial
to select.
<Set Alarms >
Sleep Timer
8. When finished, the radio will show “Time and Date Set”.
Set Date
01 Jan 2008
Time and Date
Set
Note: At any point, you can use the BACK button to start over at the
previous screen.
1. If you are currently listening to a radio station, briefly press the dial
once to access the primary menu. You can also access the
primary menu by repeatedly pressing the BACK button.
The Primary menu contains contains four options: “Stations”,
“Configure”, “Media Player”, and “Alarm Clock”.
2. Turn the main dial clockwise until “Alarm Clock” shows in brackets
— press the dial to select.
Media Player
<Alarm Clock >
4. Turn the dial and choose one of the five alarm slots to set — press
the dial to select.

CC WiFi Page 17
Setting the Alarm
Disable All
<1 OFF >
7. Choose how frequently you want the alarm to sound. Choose
between “Once”, “Every Day”, “Weekly”, “Week Days”, and
“Weekends” — press the dial to select.
Note: If “Once” or “Weekly” is selected, you will also be prompted to
select the day of the week that you would like the alarm to sound.
<Once >
Every Day
5. Turn the dial until the hour setting is correct — press the dial to
select.
6. Turn the dial until the minute setting is correct — press the dial to
select.
Set Alarm
12:00 AM
8. Choose whether to sound the alarm as a buzzer or a preset radio
station — press the dial to select.
Note: If you do not have any radio stations stored as presets, then
“Buzzer” will be your only option.
9. When the setup is finished, the display will show “Alarm Set”.
<Buzzer >
Preset Station
Alarm Set

Page 18 CC WiFi
With the sleep timer enabled, the internet radio will automatically
switch itself off after a set amount of time.
Note: At any point, you can use the BACK button to start over at the
previous screen.
1. If you are currently listening to a radio station, briefly press the dial
once to access the primary menu. You can also access the
primary menu by repeatedly pressing the BACK button.
The Primary menu contains contains four options: “Stations”,
“Configure”, “Media Player”, and “Alarm Clock”.
2. Turn the main dial clockwise until “Alarm Clock” shows in brackets
— press the dial to select.
3. Turn the dial until “Sleep Timer” shows in brackets — press the
dial to select.
4. The radio will show “Sleep Timeout” and the amount of time before
the radio turns off. By default the sleep timer is turned off.
Turn the dial to increase the amount of time before the radio turns
itself off. 15 minute increments are used. Press the dial to select.
Setting the Sleep Timer
Set Alarms
<Sleep Timer >
Sleep Timeout
<Off >
Media Player
<Alarm Clock >

CC WiFi Page 19
Setting the Sleep Timer
“Timer Set” will show in the display indicating that the radio will play
for the selected amount of time before switching itself off.
Sleep Timeout
<00:15 >
Timer Set
edia Player Functions
Requirements
In order to play the music files you have stored on your PC via the
Media player, you must ensure the following:
1. The PC containing the stored audio must be on the same network
as the radio.
2. The stored audio must be in the correct location on your PC
(Shared Music folder).
3. The PC must have file sharing turned on.
4. The stored audio must not be “protected” or limited.
usic Content
The CC WiFi Radio is able to play the following audio formats:
FI E TYPE FI E EXTENSION SHOWN ON PC
MP3 .mp3
Windows Media .wma
Real .ra
iTunes .aac
Ogg Vorbis .ogg

Page 20 CC WiFi
edia Player Functions
Accessing a Computers Stored Audio
Note: At any point, you can use the BACK button to start over at the
previous screen.
1. If you are currently listening to a radio station, briefly press the dial
once to access the primary menu. You can also access the
primary menu by repeatedly pressing the BACK button.
The Primary menu contains contains four options: “Stations”,
“Configure”, “Media Player”, and “Alarm Clock”.
2. Turn the main dial clockwise until “Media Player” shows in
brackets — press the dial to select.
Configure
<Media Player >
3. There are two different methods for accessing stored audio on
your computer; “Windows Shares” and “UPNP Servers”.
<Windows Shares >
UPNP Servers
A. Using “Windows Shares” method to access stored audio:
This method scans for computers on your network. Once a computer
is found and accessed, the radio is able to play stored audio from that
computer.
1. Turn the dial until “Windows Shares” shows in brackets — press
the dial to select.
2. Turn the dial until “Scan for PCs” shows in brackets — press the
dial to select.
3. A list of computers on the same network will show on the radio.
Choose which computer to access – press the dial to select.
4. Select the shared folder that contains the audio desired — press
the dial to select