C.R. Plastic Products St. Tropez T35 User manual

T35 St. Tropez Dining Table
C.R. Plastic Products Inc.
1 –533 Romeo Street South
Stratford Ontario N5A 4V3
Toll Free: 800-490-1283
Fax: [phone]
www.crpproducts.com

A. Table Top Qty: 1
B. Leg Qty: 4
C. Leg Support Qty: 1
D. Leg Support Fill Panel Qty: 1
PARTS LIST:
A - Table Top
B - Leg
C - Leg Support
D - Leg Support Fill Panel
HARDWARE LIST:
28 –1½”Screws
4 –2½” Screws
Note:
Read these instructions carefully before assembling.
Tools required: # 2 Phillips or #2 Robertson bit and power drill.
Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the plastic surfaces.
Two people might be required for assembly.
Caution!! Do not over tighten screws.

Step 1: Attach Leg (B) to Table Top (A) with 6 - 1½” screws.
Step 2: Repeat for remaining three legs.
Figure 1
Step 3: Attach the Leg Support (C) to table legs with 4- 2½” screws using peck holes
for alignment. Do not tighten.
Step 4: Install 4- 1½” screws as shown and then tighten previously installed
2½”screws
Step 5: Flip table over and insert Leg Support Fill Panel (D)
Figure 2
Required
Qty
Table Top (A)
1
Leg (B)
4
1½” Screws
24
Required
Qty
Leg Support (C)
1
Leg Support Fill
Panel (D)
1
1½” Screws
4
2½” Screws
4
Step 1
Use 1½” Screws
Step 3
Use 2½” Screws
Step 4
Use 2½”Screws
Screw
Leg (C)
Step 5