C.R. Plastic Products St. Tropez C35 User manual

C35 St. Tropez Dining Side Chair
C.R. Plastic Products Inc.
1 –533 Romeo Street South
Stratford Ontario N5A 4V3
Toll Free: 800-490-1283
Fax: [phone]
www.crpproducts.com

A. Seat Qty. 1
B. Back Qty. 1
C. Right Leg Qty. 1
D. Left Leg Qty. 1
E. Short Stringer Qty. 1
F. Long Stringer Qty. 2
PARTS LIST:
A - Seat
B - Back
C - Left Leg
D - Right Leg
E - Short Stringer
F - Long Stringer
HARDWARE LIST:
13 –1½”Screws
10 –2½” Screws
Note:
Read these instructions carefully before assembling.
Tools required: # 2 Phillips or #2 Robertson bit and power drill.
Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the plastic surfaces.
Two people might be required for assembly.
Caution!! Do not over tighten screws.

Step 1: Attach Short Stringer (E) to Right Leg (C) using 1 - 1½” screw and 1 - 2½”
screw. Detail X
Repeat for Left Leg (D).
Figure 1
Step 2: Attach Leg assembly from step 1 to Seat (A). Use 3 - 1½” screws.
Figure 2
Required
Qty
Right Leg(C)
1
Left Leg (D)
1
Short Stringer(E)
4
1½” Screws
2
2½” Screws
2
Required
Qty
Seat (A)
1
1½” Screws
3
Step 1
Use 1½” Screws
Keep leg assembly tight to seat.
Step 2
Use 1½” Screws.
X
Use 2½” Screws
Keep holes to bottom
& countersink to back.

Step 3: Attach Back (B) to leg supports with 4 - 2½” screws (detail Y).
Step 4: Attach Back (B) to seat with 4 - 2½” screws.
Step 5: Attach back Long Stringer (F) with 4 - 1½” screws.
Step 6: Attach front Long Stringer (F) with 4 - 1½” screws..
Figure 3
Required
Qty
Back (B)
1
Long Stringer (F)
2
1½” Screws
8
2½” Screws
8
Step 3
Use 2½” screws
Step 6
Use 2½” screws
Y
Step 5
Use 1½” screws
Step 6
Use 1½” screws
Step 4
Use 2½” screws
Stringer (F)