Argos Puerto Rico User manual

Puerto Rico - Console Table
345/9627
Assembly Instructions - Please keep for future reference
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
Important –Please read these instructions fully before starting assembly
Dimensions
Width - 107cm
Depth - 40cm
Height - 73.5cm
Issue 1 - 10/10/14

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: If required the next page
can be cut out and used as
reference throughout the
assembly. Keep this page with
these instructions for future
reference.
1
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
This product has been produced
from natural timber; you may
notice some variation in the grain
and colour of different component
parts which is normal for furniture
produced using natural wood and
is not the result of any
manufacturing fault.
The product has been treated
with a wax and oil finish to
prevent dirt ingress and preserve
moisture.
On unpacking the
furniture you may notice an
odour due to this treatment;
this will disappear once the
furniture is unpacked and
assembled after a period of time.
This process may leave some
staining on the packaging
material; please take care to
ensure this does not transfer
to clothing or carpeted surfaces
during assembly.
Care and maintenance
Use an appropriate furniture
polish for natural wood
furniture and a dry cloth to
clean the product.
Avoid placing the furniture in
direct sunlight as this will cause
the timber to prematurely age.
From time to time check
that there are no loose
screws on this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.

Components - Panels
Please check you have all the panels listed below
2
1Top panel (107 x 40cm)
2Front and back frame x 2 (90 x 25cm)
4Back panel (89.8 x 24cm)
8Side panel x 2
(25 x 23cm)
3Leg x 4 (71.5 x 5.5cm)
6Drawer front (76.4 x 11.2cm)
9Drawer sides x 2
(24 x 11.2cm)
7Drawer back (74 x 11.2cm)
10 Drawer runner x 2
(26.6 x 6.9cm)
5Drawer bottom (75 x 22.6cm)

3
Components - Fittings
Please check you have all the fittings listed below
If you have damaged or missing components,
call the Customer Helpline: 03456 400 800
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Ruler - Use this ruler to help correctly identify the screws
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
Phillips screwdriver
(small & medium)
Eye protection
(when using a
hammer or glue)
Small
hammer
Ruler/tape
measure
2m
G
A
D E
C
F
B
Wooden dowel x 30
Nail x 14
19mm Bolt x 2 Drawer
handle x 2
30mm Screw x 8 35mm Screw x 22
Round metal
stud x 12

Step 1
Assembly Instructions
4
Insert dowels into the
indicated parts.
A
Step 2
Step 3
A
A
A
A
A
A
A
2x
2
8
10
2x
2x
C
C
C
C
2
3
3
2x
8
8
C
C
C
8
Attention:
Fixing front panel.
With help, fit front frame
to legs .
Make sure panel is
positioned as shown.
Attach front frame to the
legs using screws .
Repeat step 2 for the
back frame and legs.
23
C
Fixing panel .side s
With help, fit panelside s
to legs.
Attach side panels to the
legs using screws .
Attention:
Make sure dowels
in side panels are
positioned as shown.
C
8
A
Attention:

Assembly Instructions
5
Step 4
Step 5
10
10
Attention:
C
C
C
Fixing front frame.
Two people are required
for an easier assembly.
lace frontWith help, p
frame properly ensuring
dowels are all fit into their
holes at the same time.
Attach side panels to the
legs using screws .
Insertig drawer runners.
Insert drawer runnes
to back frame .
Attention:
Make sure drawer
runners are positioned
correctly as shown in the
diagram.
10
2
2
C

Assembly Instructions
6
1
Step 6
Step 7
d: Using bolts attach
drawer handle to
drawer front.
c: Holding the drawer
back , press drawer
sides and fix them using
screws .
Drawer assembly.
a: Attach drawer sides
to the drawer front
using screws .
6
Fixing top panel.
Two people are required
for an easier assembly.
Caution:
Carefully lay the
top panel on a soft and
clean surface to avoid
damaging the product.
Attach cabinet to the top
panel using screws .
Important:
With help, after
fixing top panel, carefully
stand the product upright.
1
1
a: b:
c:
d:
7
5
C
C
C
C
C
D
9
B
96
B
B
B
E
E
D
D
E
9
B
7
B
b: Slide drawer bottom
into slots on drawer
sides and position drawer
back in place.
5
7

Step 8
Step 10
Insert drawer into unit.
With the back of the
drawer past the front
frame, use a hammer to
tap dowels in flush to
drawer sides. This is a
safety catch to stop
drawer falling out.
A
A A
Assembly Instructions
7
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400 800
Step 9
Fixing back panel.
Important:
Cabinet beMUST
‘square’ when back
panel is attached.
Attach back panel
using nails .
G
4
G
G
4
Fix round metal studs
into the pre drilled holes
in legs .
Assembly is complete.
NO! NO! YES!
F
F
FF
3
F