C.R. Plastic Products St. Tropez T37 User manual

T37 St. Tropez 35” Square Counter
Pedestal Table
C.R. Plastic Products Inc.
1 –533 Romeo Street South
Stratford Ontario N5A 4V3
Toll Free: 800-490-1283
Fax: [phone]
www.crpproducts.com

A. Table Top Qty. 1
B. Leg Qty. 1
C. Brace Qty. 2
D. Brace Qty. 2
E. Base Qty. 1
PARTS LIST:
A - Table Top
B - Leg
C - Brace
D - Brace
E - Base
HARDWARE LIST:
44 –1½”Screws
Note:
Read these instructions carefully before assembling.
Tools required: # 2 Phillips or #2 Robertson bit and power drill.
Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the plastic surfaces.
Two people might be required for assembly.
Caution!! Do not over tighten screws.

Step 1: Attach Leg (B) to Table Top (A) with 4 - 1½” screws.
Step 2: Attach 1 Brace (C) to Leg (B) and Table Top (A) with 7 - 1½” screws
Step 3: Repeat with 3 remaining braces.
Figure 1
Step 4: Attach Base (E) to table leg (B) using 12 1½” screws.
Figure 2
Required
Qty.
Table Top (A)
1
Leg (B)
1
Brace(C)
2
Brace (D)
2
1½” Screws
32
Required
Qty.
Base (E)
1
1½” Screws
12
Step 1
Caution: Make sure all the screw holes line up
with the table top boards; not between them
before you install any screws.
Step 2
Leg (B)
Brace (C)
Step 4