C.R. Plastic Products St. Tropez T30 User manual

T30 St. Tropez 35” Square Cocktail Table
C.R. Plastic Products Inc.
1 –533 Romeo Street South
Stratford Ontario N5A 4V3
Toll Free: 800-490-1283
Fax: [phone]
www.crpproducts.com

A. Table Top Qty: 1
B. Large Leg Assembly Qty: 1
C. Medium Leg Assembly Qty: 1
D. Small Leg Assembly Qty: 1
PARTS LIST:
A - Table Top
B - Large Leg Assembly
C - Medium Leg Assembly
D - Small Leg Assembly
HARDWARE LIST:
24 –1½”Screws
Note:
Read these instructions carefully before assembling.
Tools required: # 2 Phillips or #2 Robertson bit and power drill.
Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the plastic surfaces.
Two people might be required for assembly.
Caution!! Do not over tighten screws.

Step 1: Attach Medium Leg (C) to Large Leg (B) with 4 - 1½” screws using peck
holes for alignment.
Step 2: Attach Small Leg (D) to Medium Leg (C) with 4 - 1½” screws using peck
holes for alignment.
Figure 1
Step 3: Attach the leg assembly to Table Top (A) using 16- 1½”screws.
Figure 2
Required
Qty
Large Leg (B)
1
Medium Leg (C)
1
Small Leg (D)
1
1½” Screws
8
Required
Qty
Table Top (A)
1
1½” Screws
16
Step 1
Use 1½” Screws
Caution: Make sure all the screw holes line up
with the table top boards; not between them
before you install any screws.
Step 2
Use 1½” Screws
Large Leg (B)
Medium Leg (C)
Small Leg (D)
Medium Leg (C)