C.R. Plastic Products St. Tropez C36 User manual

C36 St. Tropez Counter Chair
C.R. Plastic Products Inc.
1 –533 Romeo Street South
Stratford Ontario N5A 4V3
Toll Free: 800-490-1283
Fax: [phone]
www.crpproducts.com

A. Seat Qty: 1
B. Back Qty: 1
E. Short Stringer Qty: 1
F. Long Stringer Qty: 1
G. Foot Rest Qty: 1
PARTS LIST:
A - Seat
B - Back
C - Left Leg
D - Right Leg
E - Short Stringer
F - Long Stringer
G - Foot Rest
HARDWARE LIST:
9 –1½”Screws
14 –2½” Screws
Note:
Read these instructions carefully before assembling.
Tools required: # 2 Phillips or #2 Robertson bit and power drill.
Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the plastic surfaces.
Two people might be required for assembly.
Caution!! Do not over tighten screws.
C. Right Leg Qty: 1
D. Left Leg Qty: 1

Step 1: Attach Short Stringer (E) to Right Leg (C) using 1 - 1½” screw and 1 - 2½”
screw. Detail X
Repeat for Left Leg (D).
Figure 1
Step 2: Attach Leg assembly from step 1 to Seat (A). Use 3 - 1½” screws.
Figure 2
Required
Qty
Right Leg (C)
1
Left Leg (D)
1
Short Stringer (E)
1
1½” Screws
2
2½” Screws
2
Required
Qty
Seat (A)
1
1½” Screws
3
Step 1
Use 1½” Screws
Keep leg assembly tight to seat.
Step 2
Use 1½” Screws.
X
Use 2½” Screws
Keep holes to bottom
& countersink to back.

Step 3: Attach Back (B) to leg supports with 4 - 2½” screws (detail Y).
Step 4: Attach Back (B) to seat with 4 - 2½” screws.
Step 5: Attach back Long Stringer (F) with 4 - 1½” screws.
Step 6: Attach Foot Rest (G) with 4 - 2½” screws..
Figure 3
Required
Qty
Back (B)
1
Long Stringer (F)
1
Foot Rest (G)
1
1½” Screws
4
2½”Screws
12
Long Stringer (F)
Step 6
Use 2½” Screws.
Step 5
Use 1½” Screws.
Step 4
Use 2½” Screws.
Step 3
Use 2½” Screws.
Y
Foot Rest (G)
Center support
on leg.