C.R. Plastic Products ST. TROPEZ T36 User manual

T36 St. Tropez 28” Square Counter
Pedestal Table
C.R. Plastic Products Inc.
1 –533 Romeo Street South
Stratford Ontario N5A 4V3
Toll Free: 800-490-1283
Fax: [phone]
www.crpproducts.com

A. Table Top Qty. 1
B. Leg Qty. 1
C. Bracket Qty. 1
D. Brace Qty. 4
E. Base Qty. 1
PARTS LIST:
A - Table Top
B - Leg
C –Bracket
D - Brace
E - Base
HARDWARE LIST:
32 –1½”Screws
Note:
Read these instructions carefully before assembling.
Tools required: # 2 Phillips or #2 Robertson bit and power drill.
Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the plastic surfaces.
Two people might be required for assembly.
Caution!! Do not over tighten screws.

Step 1: Center Bracket (C) and attach to Table Top (A) with 4 - 1½” screws.
Step 2: Attach Leg (B) to Bracket (C) with 4 - 1½” screws.
Figure 1
Step 3: Attach 1 Brace (D) to Leg (B) and Table Top (A) with 3 - 1½” screws.
Step 4: Repeat with 3 remaining braces.
Step 5: Attach Base (E) to table leg (B) using 12 1½” screws.
Figure 2
Required
Qty.
Table Top (A)
1
Leg (B)
1
Bracket(C)
1
1½” Screws
8
Required
Qty.
Brace (D)
4
Base (E)
1
1½” Screws
24
Step 1
Step 2
Leg (B)
Brace (C)
Step 5
Step 3