CAB AXON 2 User manual

Assembly Instructions
Tube Applicator
AXON 2
MADE IN GERMANY

2 2
Assembly Instruction
Edition: 09/2019 - Part No. 9003458
Copyright
This documentation as well as translation hereof are property of cab Produkttechnik
GmbH & Co. KG.
The replication, conversion, duplication or divulgement of the whole manual or parts
of it for other intentions than its original intended purpose demand the previous
written authorization by cab.
Editor
Regarding questions or comments please contact cab Produkttechnik GmbH & Co.
KG.
Topicality
Due to the constant further development of our products discrepancies between
documentation and product can occur.
Please check www.cab.de for the latest update.
Terms and conditions
Deliveries and performances are effected under the General conditions of sale of
cab.
Germany
cab Produkttechnik
GmbH & Co KG
Karlsruhe
Phone [phone]
www.cab.de
USA
cab Technology, Inc.
Chelmsford, MA
Phone [phone]
www.cab.de/us
Taiwan
cab Technology Co., Ltd.
Taipei
Phone [phone]
www.cab.de/tw
China
cab (Shanghai) Trading Co., Ltd.
Guangzhou
Phone [phone]
www.cab.de/cn
France
cab Technologies S.à.r.l.
Niedermodern
Phone [phone]
www.cab.de/fr
Mexico
cab Technology, Inc.
Juárez
Phone [phone]
www.cab.de/es
China
cab (Shanghai) Trading Co., Ltd.
Shanghai
Phone [phone]
www.cab.de/cn
South Africa
cab Technology (Pty) Ltd.
Randburg
Phone [phone]
www.cab.de/za

3
1 Introduction....................................................................................4
1.1 Instructions ......................................................................................4
1.2 Intended Use ...................................................................................5
1.3 Safety Instructions...........................................................................5
1.4 Environment.....................................................................................6
2 Mounting.........................................................................................7
2.1 Removing the Cover........................................................................7
2.2 Replacing the Print Roller................................................................7
2.3 Replacing the Dispense Plate..........................................................8
2.4 Mounting the Applicator ...................................................................8
2.5 Mounting the Tray............................................................................9
3 Settings.........................................................................................10
3.1 Adjusting the Swing Arms..............................................................11
3.2 Adjusting the Pressure Rollers ......................................................12
3.3 Adjusting the Transport Rollers......................................................12
3.4 PrinterConguration.....................................................................13
4 Operation......................................................................................14
4.1 Preparation....................................................................................14
4.2 Standard Operation .......................................................................15
5 Fault Correction...........................................................................16
6 Licenses .......................................................................................17
6.1 Declaration of Incorporation...........................................................17
6.2 EU Declaration of Conformity........................................................18
Table of Contents

4 4
1 Introduction
1.1 Instructions
Important information and instructions in this documentation are designated
as follows:
Danger!
Draws attention to an exceptionally great, imminent danger to your
health or life due to hazardous voltages.
!
Danger!
Draws attention to a danger with high risk which, if not avoided,
may result in death or serious injury.
!
Warning!
Draws attention to a danger with medium risk which, if not avoided,
may result in death or serious injury.
!
Caution!
Draws attention to a danger with low risk which, if not avoided, may
result in minor or moderate injury.
!
Attention!
Draws attention to possible dangers, material damage or loss of
quality.
i
Note!
Gives you tips. They make a working sequence easier or draw
attention to important working processes.



Environment!
Gives you tips on protecting the environment.
Handling instruction
Reference to section, position, illustration number or document.
Option(accessories,peripheralequipment,specialttings).
Time Information in the display.

5
1 Introduction
1.2 Intended Use
• The device is intended exclusively as an option for SQUIX 4MP printers for
applying labels onto tubes. Any other use or use going beyond this shall
be regarded as improper use. The manufacturer/supplier shall not be liable
for damage resulting from unauthorized use; the user shall bear the risk
alone.
• Usage for the intended purpose also includes complying with that manual.
• The device is manufactured in accordance with the current technological
status and the recognized safety rules. However, danger to the life and
limb of the user or third parties and/or damage to the device and other
tangible assets can arise during use.
• The device may only be used for its intended purpose and if it is in perfect
working order, and it must be used with regard to safety and dangers as
stated in that manual.
i
Note!
All documentations can also currently be found in the Internet.
!
Warning!
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
1.3 Safety Instructions
• Disconnect the printer from the electrical outlet before mounting or
removing the applicator.
• The applicator may only be operated when it is mounted on the printer.
• Work going beyond this may only be performed by trained personnel or
service technicians.
• Unauthorized interference with electronic modules or their software can
causemalfunctions.Otherunauthorizedworkonormodicationstothe
device can also endanger operational safety.
• Always have serviceworkdoneinaqualiedworkshop,wherethe
personnel have the technical knowledge and tools required to do the
necessary work.

6 6
1 Introduction
1.4 Environment



Obsolete devices contain valuable recyclable materials that should be sent
for recycling.
Send to suitable collection points, separately from residual waste.
The modular construction of the device enables it to be easily disas-
sembled into its component parts.
Send the parts for recycling.
Take the electronic circuit boards to public waste disposal centers or to
the distributor.

7
2 Mounting
!
Attention!
Disconnect the printer from the electrical outlet before
mounting or removing the applicator.
2.1 Removing the Cover
2
1
Loosen screw (2) and remove cover (1).
2.2 Replacing the Print Roller
2
1
3
4
Turn the roller bearing (3) with the 2.5 mm Allen key out of the side plate
(4).
Pull the original print roller (6) from the shaft (1) through the side plate (4).
Insert the new roller (2) and slide it onto the shaft(1). Turn the roller slightly
until the hexagonal shaft engages the hexagonal socket of the roller.
Put the roller bearing (3) onto the axle of the roller and screw it into the
side plate (4).

8 8
2.3 Replacing the Dispense Plate
2 21 3 4
Loosen the screw (3) several turns.
Slide the original dispense plate (4) upwards and remove it.
Place dispense plate of the applicator (1) onto the screw (3) and slide it
downwards behind the pins (2).
Tighten the screw (3).
2.4 Mounting the Applicator
1 2 2
Loosen two screws (2) and remove the cover (1).
2 Mounting

9
2 Mounting
3 4 5 6 7
Insert the pins (5) of the applicator into the holes (3) of the printer.
Press the applicator against the printer. That way the plug (7) will be
connected to the peripheral port (4) of the printer.
Secure the applicator with the screw (6).
Mount the cover of the applicator.
2.5 Mounting the Tray
1 2
Pushthetray(1)undertheapplicatorandtitattheaxle(2).

10 10
3 Settings
1 12 23
The applicator can be adjusted as follows:
• Adjusting the swing arms (1) to adapt the applicator to the length of the
tube and the positioning of the label 3.1 on page 11
• Adjusting the pressure rollers (2) for guiding the cap or thread of the tube
3.2 on page 12
• Adjusting the transport rollers (3) for guiding the cap or thread of the tube
3.3 on page 12
• Teaching the applicator to the tube diameter 3.4 on page 13
• Setting further labelling parameters 3.4 on page 13