CAD Audio WX100 Series User manual

WX100 Series
Installation-grade
Wireless Microphone System
featuring the
WX160
A/V Desk stand
transmitter

WX100 Series
Installation-grade
Wireless Microphone System
WX100 Receiver .................................................................................page 4
WX160 Desk stand ............................................................................page 4
301 Lavalier microphone ...................................................................page 5
302 Headworn microphone ..............................................................page 5
WX150 Handheld microphone .........................................................page 6
WX155 Body pack transmitter .........................................................page 6
DA100 Distribution Amplier ......................................................pages 7-8
Accessories .................................................................................pages 9-10

WX100 Series
The new WX100 UHF Wireless Series from CAD Audio provides the A/V installer with
straight-forward and intuitive form factors, ultra-reliable high performance wireless
connectivity and superior audio bandwidth.
The WX100 was designed using the latest wireless technologies and industry-leading diversity
performance to ensure the highest standards in connectivity in the most congested RF
environments.
In addition to superior connectivity, the WX100 features a familiar and intuitive control
scheme that allows easy, problem-free operation by casual non-professional users. The WX100
transmitters’ uncomplicated form factors make it easy to identify various features, operate
on/off switches, change and recharge batteries.
These designs along with an array of useful accessories make the WX100 a perfect solution
for A/V suites, exible meeting spaces or any situation that requires easy to use, highly reliable
wireless.
Specications WX100 Receiver
Maximum Output Level
Balanced Output ...................................................................................... -10bBV
Unbalanced Output ................................................................................ +10dBV
Output Impedance
Balanced Output .................................................................................. 200ohms
Unbalanced Output ............................................................................. 100ohms
RF Bandwidth ......................................................................................... 38.4MHz
Switchable Frequencies .................................................................................... 16
RF Sensitivity ..........................................................................-95dBm >75dB S/N
Image Rejection .......................................................................................... >85dB
Squelch ................................................................Noise Squelch and Tone Squelch
Multipath Mitigation ............................................................True Spatial Diversity
Dimensions ............................. 7-7/8" [200mm] x 5-7/8" [150mm] x 1- 3/4" [44mm]
Net weight [mass] ......................................................................... 1lb 5oz [0.6Kg]
4
WX100 Series

Specications WX100 Receiver
Maximum Output Level
Balanced Output ...................................................................................... -10bBV
Unbalanced Output ................................................................................ +10dBV
Output Impedance
Balanced Output .................................................................................. 200ohms
Unbalanced Output ............................................................................. 100ohms
RF Bandwidth ......................................................................................... 38.4MHz
Switchable Frequencies .................................................................................... 16
RF Sensitivity ..........................................................................-95dBm >75dB S/N
Image Rejection .......................................................................................... >85dB
Squelch ................................................................Noise Squelch and Tone Squelch
Multipath Mitigation ............................................................True Spatial Diversity
Dimensions ............................. 7-7/8" [200mm] x 5-7/8" [150mm] x 1- 3/4" [44mm]
Net weight [mass] ......................................................................... 1lb 5oz [0.6Kg]
Specications WX160 Desk stand with 915B/920B gooseneck mics
Operating Principle (915B/920B) .........................................................Condenser
Polar Pattern (915B/920B) ........................................................................ Cardioid
Frequency Response .......................................................................150Hz - 15KHz
Maximum SPL .............................................................................................. 118dB
RF Transmitter Output .............................................................. 50 mW maximum
Modulation ............................................................................. FM, +/- 40KHz peak
Dimensions ...................................................1-15/16" [50mm] x 22-3/16" [111mm]
x 5 -13/16" [148mm]
Net weight [mass] ...................................... 1lb 6.8oz [0.65Kg] (without batteries)
Power Requirements ...................... 2 “AA” size alkaline or rechargeable batteries
Battery Life .............................................................................. >10 hours (alkaline)
WX160 Desk
stand
The WX160 is a desk stand transmitter designed for use in pro audio A/V applications. The
WX160 accommodates various length goosenecks and is optimized for use with the CAD 915B
and CAD 920B. Designed with intuitive and exible programmability the WX160 fullls
requirements for easy operation and custom applications. The WX160 has two user dened
mute options. Power up “on” or Power up “off” and is complimented with easy to use latching
or momentary switches. The WX160 is designed to accommodate alkaline or rechargeable
batteries.
5

The 301 is a cardioid condenser lavalier microphone
designed for high performance where linear response
translates to superior gain before feedback. Supplied with
clip and windscreen.
The 302 is a hypercardioid condenser headworn microphone
designed with dual-ear comfort ensuring a stable and
comfortable t. The 302 combines high-sensitivity with high
sound pressure capability to accommodate successful
performances, boardroom to stage.
6
Specications 301 Lavalier (with WX155 and WX100)
Operating Principle ......................................................... Condenser
Polar Pattern .........................................................................Cardioid
Frequency Response ...................................................80Hz - 15KHz
Sensitivity (MT max, XLR output) .................. -25dB (58mV) @1Pa
Impedance ..........................................................................200ohms
Maximum SPL (MT min) ........................................................ 114dB
Connector .........................................................................TA4F- type
Specications 301 Headworn (with WX155 and WX100)
Operating Principle ......................................................... Condenser
Polar Pattern ................................................................Hypercardioid
Frequency Response ...................................................80Hz - 17KHz
Sensitivity (MT max, XLR output) .................. -23dB (73mV) @1Pa
Impedance ..........................................................................200ohms
Maximum SPL .........................................................................125dB
Connector .........................................................................TA4F- type
301 Lavalier
302 Headworn

Specications WX150 Handheld
Operating Principle ..........................................Moving coil dynamic
Polar Pattern ........................................................................ Cardioid
Frequency Response .................................................. 80Hz - 15KHz
Maximum SPL ...................................... 146dB (sensitivity level “1”)
Dynamic Range .................................................................... 115dBA
RF Transmitter Output .........................................50 mW maximum
Modulation ........................................................FM, +/- 40KHz peak
Dimensions .................................. 9-5/8" [24.5cm] x 2-1/16" [5.2cm]
Net weight [mass] .......................8.3oz [0.24Kg] (without batteries)
Power Requirements ......................................... 2 “AA” size alkaline
or rechargeable batteries
Battery Life .........................................................>10 hours (alkaline)
Specications WX155 Body-pack
Frequency Response ...................................................25Hz - 15KHz
Maximum input level ...............................Microphone input: -6dBV
Instrument input: +6dBV
RF Transmitter Output ......................................... 50 mW maximum
Modulation ........................................................ FM, +/- 40KHz peak
Dimensions ........................................................... 3-15/16" [10cm] x
2-5/8" [6.6cm] x 1" [2.5cm]
Net weight [mass] ......................... 3.4oz [0.1Kg] (without batteries)
Power Requirements ..................................... 2 “AA” size alkaline or
rechargeable batteries
Battery Life ......................................................... >10 hours (alkaline)
The WX150 is a cardioid dynamic handheld microphone
designed for use in pro audio A/V applications. The WX150
features an uncomplicated on/off switch with Smart Audio
Technology ensuring silent on/off operation. The WX150 is
designed to accommodate alkaline or rechargeable batteries.
The WX155 is a body-pack transmitter designed for use in pro
audio A/V applications. The WX155 features an uncomplicated
on/off switch with Smart Audio Technology ensuring silent
on/off operation. The WX155 is designed to accommodate
alkaline or rechargeable batteries.
7
Specications 301 Lavalier (with WX155 and WX100)
Operating Principle ......................................................... Condenser
Polar Pattern .........................................................................Cardioid
Frequency Response ...................................................80Hz - 15KHz
Sensitivity (MT max, XLR output) .................. -25dB (58mV) @1Pa
Impedance ..........................................................................200ohms
Maximum SPL (MT min) ........................................................ 114dB
Connector .........................................................................TA4F- type
Specications 301 Headworn (with WX155 and WX100)
Operating Principle ......................................................... Condenser
Polar Pattern ................................................................Hypercardioid
Frequency Response ...................................................80Hz - 17KHz
Sensitivity (MT max, XLR output) .................. -23dB (73mV) @1Pa
Impedance ..........................................................................200ohms
Maximum SPL .........................................................................125dB
Connector .........................................................................TA4F- type
WX155 Body-pack
WX150 Handheld

The DA100 is an antenna distribution amplier for the CAD Audio WX100 wireless receiver.
The DA100 is designed for use in pro audio applications such as audio-video integration and
musical/theatrical performance.
The DA100 features a net 0dB amplication eliminating split-attenuation when used in
conjunction with the WX100 receiver. Minimal amplication is applied to reduce the risk of
unwanted intermodulation interference.
The onboard power distribution system conveniently distributes 12V power for up to four of
the WX100 receivers. The power switch on the DA100 also controls the WX100 receiver power
when connected to the power distribution hub.
All antenna connectors are BNC-type for easy plug and play compatibility.
Antennas are not supplied with the DA100. Whip antennas supplied with the WX100 may be
used and can be front mounted utilizing the ANT105 mounting kit. Additional high-performance
antenna options are available from CAD Audio.
The DA100 comes complete with RF patch cables for four receivers, rack ears and the
appropriate power cables for patching and connecting an AC power source.
DA100 Distribution Amplier
Specications DA100 Distribution Amplier
Frequency Range ...............................................UHF 600 - 900MHz
Impedance ..................................................................................50Ω
Gain ................................................................................ 0dB +/- 3dB
AC Power ................................................................100 - 240V, 60Hz
DC Output .............................................................DC 12 - 15V, 3.6A
Dimensions ..............................16 -1/2" [41.9cm] x 7-13/16" [19.8cm]
x 1- 3/4" [4.45cm]
Net weight [mass] ................................................ 3lbs 7oz [1.56kg]
8

DA100 DA100
DA100
9
ANT105 ANT105
RF Connections DC power distribution

ANT110 Ground-plane
dipole Antenna
ANT100 Whip
dipole Antenna
Specications ANT110
Type ..........................................................................................Dipole
Frequency Range ....................................................... 600 - 960MHz
Polarization ................................... Vertical, when oriented vertically
Gain .............................................................................................3dBi
Impedance .................................................................................. 50Ω
V.S.W.R. ............................................................................... < 1.6:1.0
Termination Type ....................................................................... BNC
Number of Elements ......................................................................4
Dimensions ..................................... 19 -1/2" [50cm] x 3-3/4" [9.5cm]
Weight [mass] ........................................................1lb 13oz [0.82kg]
Mounting Connector ................. 5/8"- 27 threaded stand connector
Specications ANT100
Type ..........................................................................................Dipole
Frequency Range ....................................................... 520 - 700MHz
Polarization ................................... Vertical, when oriented vertically
Gain .............................................................................................2dBi
Impedance .................................................................................. 50Ω
V.S.W.R. ...............................................................................< 2.0:1.0
Termination Type ....................................................................... BNC
Number of Elements ......................................................................1
Dimensions .............................................12" [30.5cm] x 1/2" [1.3cm]
Weight [mass] ..................................................................1.4oz [40g]
Specications ANT120
Type ............................................................ Log-periodic dipole array
Frequency Range ....................................................... 520 - 860MHz
Polarization ................................... Vertical, when oriented vertically
Gain .............................................................................................7dBi
Impedance .................................................................................. 50Ω
V.S.W.R. ................................................................................< 1.7:1.0
Termination Type ....................................................................... BNC
Number of Elements ......................................................................9
Dimensions .................................11-5/16" [29cm] x 10- 5/16" [26cm]
Weight [mass] .............................................................6.3oz [0.18kg]
Mounting Connector ................. 5/8"- 27 threaded stand connector
ANT120
Paddle Antenna
Accessories
10