CAMION BRINE MASTER 1600 User manual

Version 1.0 Copyright © Enduraplas. All Rights Reserved.
Product Code:
IMSBM1600
OWNER’S MANUAL
BRINE MASTER 1600
®
BRINE MASTER 1600

2Brine Master®
English
CONTENTS
INTRODUCTION 3
WARNINGS 4 - 5
GETTING STARTED 6 - 7
OPERATION 8 - 11
MAINTAINING 12
TROUBLESHOOTING 13
WARRANTY 14 - 17
PARTS BREAKDOWNS 18 - 22
!

3Version 1.0
English
INTRODUCTION
Congratulations! You now own an Camion™ Brine Master®.
Durable design and construction assure you a lifetime of
extreme performance.
Take a look through this owner’s manual to learn how the
pros use their Camion™ Brine Master®.
Discover More Helpful Tips:
www.IceControlTraining.com
Watch Instruction Videos:
www.youtube.com

4Brine Master®
English
WARNINGS
1. To ensure your own safety and that of others, you must
comply with all relevant environmental, work place health,
safety legislation and codes of practice.
2. Select and wear appropriate Personal Protection
Equipment in accordance with the label of the product
you intend to use.
3. Once the mixing operation has been completed,
decontaminate the tank and spray accessories.
Dispose of tank rinsing’s in compliance with current
environmental, work place health and safety regulations.
4. Improper or careless use of this brine maker can cause
serious injury. Minors should never be allowed to use this
brine maker. This brine maker should not be used when
bystanders or animals are in the area. This brine maker
should never be used while children are in the area.
5. Never leave the brine maker unattended without turning
o󰀨 the pump and relieving any line pressure.
6. You must be in good mental health to operate this brine
maker and not be under the inuence of alcohol or any
drugs that could impair your vision, physical strength,
dexterity, judgment, or other mental capacity.
7. No modications and/or alterations may be made to this
brine maker. Any such modications not only void the
warranty but can make the unit dangerous to anyone
operating the pump.
8. Always inspect hoses and piping to avoid burst injuries
!

5Version 1.0
English
Discover More Helpful Tips:
www.IceControlTraining.com

6Brine Master®
English
The Brine unit requires a 115 volt, 20 amp circuit to operate.
It comes supplied with waterproof wiring and plug ready
to hook up. You will need a 115 volt outlet with a 20 amp
breaker in your box. If you do not have this set up, use a
certied electrician to install your power supply and follow all
local code requirements.
Electrical Requirements
Setting-up your Brine Master®
GETTING STARTED
2) Make sure your unit is level by using the base frame as
your levelling point and adding shims underneath the frame
accordingly.
3) Next, connect your fresh water supply
hose to valve #3 and your discharge
supply hose to valve #4.
1) Ensure your Brine Master® is
positioned so you have access to all port
hook ups and the control panel.

7Version 1.0
English
GETTING STARTED
4) To achieve best results with your
brine maker, use a good quality salt. The
quality of your salt aides in speeding up
the brining process and will eliminate
having to clean out screens as often.
5) It is recommended to rst ll the unit with fresh water to
ensure there are no leaks and your power supply is correct.
Setting-up your Brine Master®

8Brine Master®
English
First Batch of Brine
OPERATION
1) To start your rst batch turn on your
pump and open valves #1 and #3 to ll
your hopper.
2) Fill your hopper to the bottom of the
screen with fresh water.
4) Always load salt slowly to avoid spillage. Your rst batch of
brine will require more salt as you are starting with a hopper
of fresh water. On consecutive batches you will load less salt
as you start with a hopper of mixed brine.
5) Continue to add salt to the hopper while your system is
lling with fresh water.
3) You can begin lling your hopper with
salt. Load your salt to the back of the
hopper, away from the screen so as not
to obstruct it.

9Version 1.0
English
OPERATION
First Batch of Brine
6) Reference the site gauge tube on
your holding tank - Once it reaches 400
gallons stop adding fresh water - We
recommend marking or putting a piece
of tape to note this level.
7) Now you will start the brining process.
See below for valve positioning.
8) Continue to add salt to the hopper
checking the salinity in the clear site
tube. To do this, open the valve to the
clear tube until your hydrometer is
oating.
9) Then close this valve. The level at
which the hydrometer oats is your
salinity reading.
10) Then open the opposite valve to
drain the clear tube.
11) Once your salinity reader reads at
23%, position valves to discharge to
your storage tank. See below for valve
positioning.

10 Brine Master®
English
First Batch of Brine
OPERATION
12) As you are discharging your nished
batch to your storage tank, ll your
hopper with salt for your next batch. This
will force some of the brine into your
holding tank increasing your batch size.
13) Once all brine is discharged rotate
valves to load fresh water and repeat
steps.

11Version 1.0
English

12 Brine Master®
English
MAINTAINING
The unit requires proper care for longevity and proper
operation. Follow all requirements for pump and motor by
reviewing their manuals that are included.
At the beginning of each brining session ensure there are no
hose or tting leaks.
The lter screen should be cleaned of any debris that would
cause a ow issue. Simply wipe o󰀨 screen and disposing of
debris in a trash can.
DO NOT leave salt brine in pump unit over long periods of
time of non use. This can cause salt creep and can move
into motor and seize up. Best practice is to clean all salt out
of the unit by ushing it with fresh water after use to prevent
salt from hardening in the bottom of the hopper. Hardened
salt can take a very long time to dissolve on the next use.
Always clean unit with fresh water at the end of every
season to clean out all brine left in brine maker to insure
proper operations for the following years.

13Version 1.0
English
Discover More Helpful Tips:
www.IceControlTraining.com
Watch Instruction Videos:
www.youtube.com
TROUBLESHOOTING
CONDITION REMEDY
Flow rate is dropping 1) Check for a blockage on the screen.
Hopper is backing up
or overowing
1) Ensure there is no blockage on
internal hopper screen.
2) Clean debris or salt away from the
screen.
3) Make sure you are not lling your
orange brining tank over 400 gallons.
Pump will not turn on 1) Check breakers and relays. Reset if
needed.
2) Check adequate power supply.
3) Verify wiring is in good condition.

14 Brine Master®
English
WARRANTY
LIMITED WARRANTY
1. Poly Tank Limited Warranty -Subject to other terms in this Limited
Warranty, Manufacturer warrants to the original end user that this
Tank will be free from material defects caused during the
manufacturing process for a period of 5 years from the Purchase
Date provided such warranty to the original end user shall be
extended to 10 years from the Purchase Date if the original end
user registers the Tank with Manufacturer within 30 days of the
Purchase Date. To register the Limited Warranty, registration must
be completed in accordance with the requirements set forth at
enduraplaswarranty.com
Other Products and Parts Limited Warranty -Subject to other
terms in this Limited Warranty, Manufacturer warrants to the
original end user that products and parts manufactured by
Manufacturer (other than tanks) will be free from material defects
caused during the manufacturing process for a period of 1 year
from the Purchase Date unless otherwise expressly stated in
writing by Manufacturer that an extended warranty applies.
2. Other Warranties Disclaimed and Excluded
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED,
WHICH EXTEND BEYOND THE LIMITED WARRANTY HEREIN
STATED, AND MANUFACTURER EXPLICITLY DISCLAIMS AND
EXCLUDES ANY AND ALL OTHER WARRANTIES INCLUDING
BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY,
FITNESS FOR PARTICULAR PURPOSE, CUSTOM OR USAGE
OF TRADE, AND COURSE OF DEALING. NO AGENT,
EMPLOYEE OR REPRESENTATIVE OF MANUFACTURER HAS
AUTHORITY TO BIND MANUFACTURER TO ANY
REPRESENTATION OR WARRANTY EXCEPT AS STATED IN
THIS LIMITED WARRANTY.

15Version 1.0
English
3. Limitation of Liability under the Limited Warranty -In addition to
those warranties disclaimed and excluded in clause 2 above,
Manufacturer expressly further limits its warranty and liability
under the Limited Warranty as set forth below in this clause 3.
3.1. The liability of Manufacturer under this Limited Warranty is
excluded to the extent that any defect has been caused or
contributed to by:
a) any accident, contamination, tampering, willful damage,
abuse, modification, improper storage, improper use
(including but without limitation the storage of material) or
negligent act of, or omission by, any person other than
Manufacturer;
b) the improper installation of the Goods, or deterioration of
the base on which any of the Goods rest or are mounted
to;
c) any damage to the Goods caused by storm, wash away,
landslide, mudslide, lightning, or any other natural
phenomenon, vermin or other pests, and any
undermining of the base of the Tank through any cause
whatsoever;
d) the repositioning of the Goods from their original
installation;
e) weathering or degradation of the Goods due to extreme
climatic conditions;
f) improper installation of extra fittings;
g) any staining or discoloration, including from trees or ash
fall-out from fires or other causes;
h) a Tank not being placed on a base that is free of any
protruding objects of any kind;
i) a Tank being used for any purpose other than the storage
of suitable liquids at the ambient temperatures.

16 Brine Master®
English
3.2. Without limiting the generality of clause 3.1:
a) Manufacturer will not be liable for any personal injury,
indirect or incidental damages, consequential losses, loss
of liquids, loss of profit or any like claims whatsoever
arising from any use of, or incidental to, or repairs to any
of the Goods by a party other than Manufacturer;
b) to the extent that any component or material (including,
but without limitation the polyethylene) used in the
manufacture of any of the Goods is supplied and/or
manufactured by a third party, the liability of Manufacturer
is limited to Manufacturer’s right of redress (if any)
against the third-party supplier/manufacturer;
c) Tanks feature a vented lid at the time of manufacture.
Any subsequent pressurization of the Tank by removing
the vent, sealing the vent, or otherwise will cause this
Limited Warranty as to such Tank to be null and void.
d) The liability of Manufacturer under this Limited Warranty
is limited to, at Manufacturer's discretion:
e) providing a replacement Good (including shipping but
excluding other replacement costs);
f) refunding an amount equal to a sum equal to the current
Retail price divided by the months in the warranty,
multiplied by the months remaining in the warranty
period;
g) repairing the Good at no cost.
4. Proof of Purchase -The original invoice or other similar proof of
purchase of the applicable must be provided by Purchaser to
Manufacturer when making a claim under this Limited Warranty.
Warranty claims must be received in writing by Manufacturer
within the Limited Warranty period.

17Version 1.0
English
5. Claims and Questions -If you have questions about this Limited
Warranty or to make a warranty claim, contact Manufacturer at:
[email protected]
6. Definitions -For this Limited Warranty the following definitions
apply:
a) Manufacturer means Enduraplas LLC.
b) Purchase Date means the date upon which the
applicable goods were purchased by the original end
user.
c) Purchase Price means the actual price paid for the Tank
by the original Purchaser.
d) Tank means the storage Tank manufactured by
Manufacturer and purchased by the original end user
Purchaser being the subject matter of the Limited
Warranty.
e) Good(s) mean Tanks and/or other products or parts
manufactured by Enduraplas LLC.
f) Limited Warranty means this written Limited Warranty.
7. State Law -Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation and
exclusion may not apply to certain parties. Some states do not
allow limitation on how long an implied warranty lasts, so the
above limitation may not apply to certain parties. This limited
warranty gives specific legal rights and other rights, which vary
from state to state, may also apply.
8. Governing Law -This Limited Warranty will be governed by the
laws of the State of Minnesota, without giving effect to any choice
of law rule that would cause the application of the laws of any
other jurisdiction.

18 Brine Master®
BRINE MASTER®
OVERVIEW
4
11 16 6
41
65
65
1
41
8
46
27
7
14
47
65
65
40
2
40
2
3
40
65
65
41
945
58
57
9
49
54
55
56
53
52
51
50
55
49
DETAIL A
DETAIL B
DETAIL C
59
DETAIL D
68 67
70
69
65
41
65
71

19Version 1.0
BRINE MASTER®
DETAIL VIEW A AND B
DETAIL A
33
28
26 33
33
35
3726
24
13
33
35
3335 10 35 24 3335 29 36 31
35
12
44
37
35
60
33
DETAIL B
1937
33 4361
10
3533 23 33 35 3513
33 35 3335 29 3436 31 28
4837
13353360

20 Brine Master®
BRINE MASTER®
DETAIL VIEW C AND D
DETAIL
SCALE
1 : 12
29
28
15
38
21
28
36
38
42
15
32
31
34
31
36
34
25
34
36
38
32
38
63
33
35
30
62
64
66
DETAIL D
3910
39
35 10 17 18 22 18
18 18 5 39
33
DETAIL C