Campania International Acanthus FT-191 User manual

F
T
-
191 AcanthusTwoTier
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
January10, 2018
PumpKitParts List
PK300 pump(1)
#10 stopper(1)
Approx. 12”lengthof½” black non-kinktubing(1)
Wedges (4)
Hose clamps(2) *
*Hoseclampsmaybeused asflowrestrictors
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately6gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Thisfountain iscompatible withaLEDkit.
(Aspecialstopper isnot required forthispart.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF320 - 320GPH Pump
16 FTcord length

F
T
-
191 AcanthusTwoTier
Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
January10, 2018
Assemble your fountainonalevel surface capable ofholdingaminimumof456 poundswithanapproximate 1.5squarefoot
footprint.
FT-191F(207lbs)
15.25”Lx15.25”Wx27”H
FT-191E(134lbs)
32.5”Wx9”H
FT-191C (30lbs)
9.5”Wx13.5”H
FT-191B (24lbs)
16”Wx4.75”H
FT-191A(8lbs)
5.25”Wx9.5”H
FT-191D(2lbs)
5.5”Lx1.5”Wx4”H
1. Place thebase(FT-191F)into position where thefountain will beinstalled,
ensuringthatit is level.
2. Assemblethepump kit
a. Attach thenon-kink tubingto thepump outlet.
b. Place thestopper around thepump cord about6”fromthepump.
3. Center thelargebowl(FT-191E)over thebase(FT-191F).
4. Feed thepump cord through theholein thelargebowl(FT-191E)and the
channelin thebase(FT-191F).
5. FIRMLY press thestopper into theholeevenly.
a. Note: Usingthehandleofascrewdriverorhammer works best.
6. Place thepump house(FT-191C)over thepump and in thecenter ofthelarge
bowl(FT-191E).
7. Feed thenon-kink tubing through thetop ofthepump house(FT-191C).
8. Center thesmall bowl(FT-191B)over thepump house(FT-191C).
9. Useahoseclamp to secure thelooseend ofthenon-kink tubingto thepipe
protrudingfromthebottomofthesmall bowl(FT-191B).
10. Center thefinial(FT-191A) over thesmall bowl(FT-191B).
11. Fit thepipeprotrudingfromthetop ofthesmall bowl(FT-191B)into theholein
thebottomofthefinial(FT-191A).
12. Fit thepump housedoor(FT-191D) into thepump house(FT-191C).
13. Fill thefountain with water.