Campania International Rittenhouse Rittenhouse User manual

FT
-
277 Rittenhouse Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
September 27, 2017
PumpKitParts List
PK300 pump (1)
#10 stopper(1)
20”length of1/2”blacknon-kinktubing (1)**
1 1/2"length of5/8”cleartubing (1)**
1 1/2"length of1/2"CPVCpipe (1)**
CopperSpillers (4)
2.8 oztubeofsilicone (1)
Wedges(4)
Hose clamps(2)*
*Hoseclamps maybe used asflow restrictors
** Tubing has been preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately20 gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible with#10 Refill Device and LEDKits
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF320 - 320GPH Pump
16 FTcord length

FT
-
277 Rittenhouse Fountain
Two people are recommended for the installation ofthisfountain!
R
evised
September 27, 2017
Assemble yourfountainon alevel surface capable ofholdingaminimumof435 poundswithanapproximate 4.5squarefootfootprint.
FT-277F(178lbs)
30”Lx30”Wx8.5”H
FT-277D(22lbs)
8.5”Lx8.5”Wx7.5”H
FT-277C (31lbs)
7”Lx7”Wx9”H
FT-277B (28lbs)
15.5”Wx28”H
FT-277A(2lbs)
6.75”Wx1”H
FT-277E(3lbs)
4”Lx1”Wx5”H
1. Place thebasin (FT-277F)intopositionwhere thefountainwill be
installed, ensuringthatitislevel.
2. Assemblethepumpkit.
a. NOTE:All pumps come with1 adapter already insertedinto thepumpand
2 adapters securedtothepower cord.
i. Thisfountainuses thesmalleradapter notalready inthepump.
b. Usingahoseclamp, attach the1/2”non-kink tubingto thepump outlet.
c. Place thestopper around thepump cord approximately8 inches fromthepump.
3. Feedthepumpcordthrough theholeinthebasin(FT-277F) andthe
channel.
4. FIRMLY pressthestopper intotheholeevenly.
5. Place thepumphouse(FT-277D)over thepumpandinthecenter ofthe
basin(FT-277F).
6. Center thepedestal(FT-277C) over thepumphouse(FT-277D).
7. Feedthetubingconnectedtothepumpthroughtheholeinthecenter of
thepedestal(FT-277C).
8. Center thebowl(FT-277B) over thepedestal(FT-277C).
9. InserttheCPVCendofthepreassembledtubing to theCPVCcoupling
protruding fromthebottomofthebowl(FT-277B).
10.Usethesiliconeprovidedtoattachthecopper spillers
a. Clean awayanyexcess silicone.
11.Place thewater control disc(FT-277A)intothebowl(FT-277B).
12.Fit thepumphousedoor(FT-277E)intothepumphouse(FT-277D).
13.Letthefountainsit 24hoursbefore fillingwithwater.