Campania International FT-143 User manual

F
T
-
143 Provence
Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
December 4, 2017
PumpKitParts List
PK800 Pump (1)
#10 stopper(1)
12”length 1/2”non-kinkhose (1)**
2”length 5/8”clearvinyltubing (2)**
2”length of3/4"clearvinyltubing (1)**
2”pieceof1/2”CPVC pipe (1)**
Wedges(2)
Hose clamps(2)
*Hoseclamps maybe used asflow restrictors
** Internaltubinghas beenpreassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoinsurethat plastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately30 gallonsof water.
Thisfountain usesanextra-largefountain cover.
(FTNCOV-XLG)
Compatible with#10 Refill Device and LEDlight kit
(Aspecialstopper isrequiredtousethe refill kit for
thisfountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PP800 - 800GPH Pump
16 FTcord length

F
T
-
143 Provence
Fountain
Three people are recommended for the installation ofthisfountain!
R
evised
December 4, 2017
Assemble your fountainonalevel surface capable ofholdingaminimumof1069 poundswithanapproximate 10.5squarefoot
footprint.
FT-143E(550lbs)
46”Lx46”Wx11”H
FT-143C (58lbs)
13.5”Lx13.5”Wx8”H
FT-143B (150lbs)
10”Lx10”Wx28”H
FT-143F(5lbs)
4.5”Lx4.5”Wx5.5”H
FT-143A(46lbs)
12”Lx12”Wx13”H
FT-134D(5lbs)
5.75”Lx3.75”Wx5”H
1. Place thebasin (FT-143E)into position where thefountain will beinstalled,
ensuringthatit is level.
2. Assemblethepump kit
a. NOTE:The screwon adapter for the pump needsto be attached before
assembling the pump kit.
b. Fit the3/4"clear end ofthetubingassemblyto pump outlet.
c. Place thestopper around thepump cord about8”fromthepump.
3. Feed thepump cord through theholein thebasin (FT-143E)and thechannel.
4. FIRMLY press thestopper into theholeevenly.
a. Note: Usingthehandleofascrewdriverorhammer works best.
5. Place thepump house(FT-143C)over thepump and in thecenter ofthelarge
basin (FT-143E).
6. Position thefeature column (FT-143B)over thepump house(FT-143C).
7. InserttheCPVCpipeconnected to thetubingassemblyinto thepipe
protrudingoutofthebottomofthefeaturecolumn(FT-143B).
8. Place thewater controller(FT-143F)over thepipeinsidethefeature column
(FT-143B).
9. Place thefountain cap (FT-143A) overthefeaturecolumn (FT-143B).
10. Fit thepump housedoor(FT-34CC)into thepump house(FT-34C).
11. Fill thefountain with water.