Campania International FT-180 User manual

F
T
-
180
FloresPedestal
Fountain
R
evised
January10, 2018
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK140 pump (1)
#7 stopper(1)
Approx.6”length of1/2”blacknon-kinktubing (1)**
Approx1”length of5/8”cleartubing (1)**
1”length of1/2”CPVC**
Hose clamps(1)
Wedges(2)
*Hoseclamps maybe used asflow restrictors
**Black non-kink tubing and clear vinyltubing havebeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately4gallonsof water.
Thisfountain usesasmallfountain cover.
(FTNCOV-SM)
Norefill device orsubmersible lightsare suggested for
thisfountain
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
PF140 - 140GPH Pump
6FTcord length

F
T
-
180
FloresPedestal
Fountain
R
evised
January10, 2018
Assembleyourfountainon alevelsurface capableofholdingaminimumof205 pounds with an approximate1
square footfootprint.
FT-180B(156 lbs)
26”W x 34.75”H
FT-170A(15 lbs)
13”W x 3”H
1. Position thebasin (FT-180B) where thefountain
is to beinstalled, ensuringthatitislevel.
2. Assemblethepumpkit
a. Using ahoseclamp, attachthe1/2"non-
kinktubing to thepumpoutlet.
b. Place thestopper aroundthepumpcord
approximately6inchesfromthepump.
3. Feedthepumpcordthrough theholeinthebasin
(FT-180B) andoutofthechannel.
4. FIRMLY press thestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriveror
hammer works best topressthestopper in
place.
5. Coilthepumpcordinthepumphouseandpush
thepumpdownasfarinto thepumphouseas
possible.
6. Insertthe1/2"CPVCpipeconnectedtothe
preassembledtubinginto theCPVCcoupling in
thebottomofthewater feature (FT-170A).
7. Place thewater feature(FT-170A)into thebasin
(FT-180B) ensuring thatit is level.
a. Turnthefeaturetocoil thetubingasyou
lower it intoposition.
8. Fillthefountainwithwater.