Campania International FT-236 User manual

FT
-
236 SmithsonianWaterLilyFountain
Two people are recommended for the installation ofthisfountain!
Revised
June2, 2017
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
Pump KitPartsList
PK300 pump (1)
#10 stopper(1)
Approx.12”length of1/2”BlackNon-Kinktubing (1)**
2”length of5/8”clearvinyltubing (1)**
2”length of1/2"PVCpipe (1)**
Wedges(2)
Hose clamps(3)*
*Hoseclampsmaybe used as flow restrictor
**Black non-kink tubing and clear vinyltubing havebeen preassembled
FOUNTAININFORMATION:
Thisfountain holdsapproximately7gallonsof water.
Thisfountain usesamediumfountain cover.
(FTNCOV-MED)
Compatible withRefill #10 Device
(A different style stopper mayberequestedfor thispart.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
290 GPH Pump
15 FTcord length

FT
-
236 SmithsonianWaterLilyFountain
Two people are recommended for the installation ofthisfountain!
Revised
June2, 2017
Assembleyourfountain onalevelsurface capableofholdingaminimumof383poundswith
anapproximate1.5square footfootprint.
FT-236C(128lbs)
24.75”Wx16.25”H
FT-117B(49lbs)
14”Wx8.5”H
FT-236A(74 lbs)
22”Wx5”H
1. Position thebasin (FT-236C) where thefountain is to be
installed, ensuringthatitislevel.
2. Assemblethepumpkit
a. Connectthetubingtothepumpoutlet.
b. Place thestopper aroundthepumpcord
approximately6”fromthepump.
3. Feedthepumpcordthrough theholeandchannelinthe
basin(FT-236C).
4. FIRMLY press thestopper intotheholeevenly.
a. Note:Usingthehandleofascrewdriverorhammer
worksbesttopressthestopperinplace.
5. Place thePumpHouseRing(FT-117B) insidethebottomof
thebasin, ensuringthatitiscenteredandlevel.
6. Holdingthewaterfeaturedisc(FT-236A)over thebasin,
insertthePVCconnectedtothenon-kinktubing intothe
PVCcouplingprotrudingfromthebottomofthedisc.
7. Carefullyplace waterfeature onto thePumpHouseRing
ensuring thatitiscenteredand level.
8. Fillthefountainwithwater.