Campania International Navonna Fountain User manual

F
T
-
197 Na
vonnaFountain
Three people are recommended for the installation ofthisfountain!
R
evised
January30, 2018
PumpKitParts List
PK500 Pump (1)
#10 stopper(1)
Approx.24”length of1/2”blacknon-kinktubing (1)**
Approx. 2”lengthof5/8”clearvinyltubing (1)**
Approx. 2”lengthof1/2"CPVC pipe(1)**
Approx.12”length of1/2”blacknon-kinktubing (1)**
Approx. 2”lengthof5/8”clearvinyltubing (2)**
Approx. 2”lengthof1/2"CPVC pipe(1)**
Hose clamps(1)*
Wedges(3)
#7 DrainStopper(1)
*Hoseclamps maybe used asflow restrictors
** Tubing has been preassembled
-WINTERCARE-
Fountainbowls/topsandotherfountaincomponents,whichcollect water, shouldnotbeleftoutsideinthewinter since anycomponent,
whichfillswithwater andfreezesmaycrack.Likewise, componentssuchaspedestals,whichremaininabasin,filledwithwater,
whichthenfreezes,mayalsocrackor crumble. Ideally, therefore, afountainshouldalwaysbestoredindoorsor inadryprotected
place suchasacoveredporchawayfromtheelements. However, ifafountainmustbeleftoutside:
(1) Removepump, rubber stoppers, drainpipes, finials,andother smallcomponentsfor storageindoors. Note that stoppersor
drainpipesareremovedtoallowdrainageintheeventwater accumulatesinanybasin.
(2) Raisefountainbasefromgroundwithwood stripssothat basewill notfreeze tothegroundsurface.
(3) Cover or wrapthefountainwithburlapor other absorbentmaterial (oldblanket or towel) andthencover securelywith
plastic,making surethat water will notaccumulate inthebasinor other fountaincomponentandfreeze;
(4) Checkfountainperiodicallytoensurethatplastic issecureandwater isnotaccumulating inanyfountaincomponent.
-GENERALFOUNTAINTIPS-
Install fountainsonalevel surface. Youwill needaproperlygrounded110-volt (AConly) GFCI protectedreceptaclenear the
fountainfor your pump. All pumpsaresubmersible andmustbecompletelyunderwater tofunctionproperly. Testall pumpsand
adjusttofull outputprior toassembly. Itisnotrecommendedthat fountainsbeplaceddirectlyongrass or dirt. Positionthechannel
opening at thebaseofeachfountaintoward theelectrical outlet tobeusedsince thepump
cord willbethreadedthroughthisopening.
CheckoutYouTubefor a“Howto”video.
For moreCampania product informationvisit www.campaniainternational.com
All of ourcaststone is proudly
FOUNTAININFORMATION:
Thisfountain holdsapproximately37-40 gallonsof
water.
Thisfountain usesamediumfountain cover but doesnot
cover the basin.
(FTNCOV-MED)
Compatible with#10 Refill Device and LEDkits
(Aspecialstopper isrequiredtousethe refill kit forthis
fountain.)
TOOLSREQUIRED:
Bubble Level
PUMPINFORMATION:
OEMPF525 - 525GPH Pump
16 FTcord length

F
T
-
197 Na
vonnaFountain
Three people are recommended for the installation ofthisfountain!
R
evised
January30, 2018
Assemble yourfountainon alevel surface capable ofholdingaminimumof1286pounds withanapproximate 17.5squarefootfootprint.
FT-197F(720lbs)
56.5”Lx56.5”Wx11.5”H
FT-197D(67lbs)
12.75”Lx12.75”Wx10”H
FT-197C (43lbs)
11”Lx11”Wx8.5”H
FT-197B (89lbs)
20.5”Wx18.5”H
FT-197A(19lbs)
15.75”Wx3”H
FT-197E(8lbs)
7”Lx2.5”Wx5”H
1. Place thebasin (FT-197F)into position where thefountain will beinstalled,
ensuringthatit is level.
a. Besure to checkthateachpart is leveland centeredduring the
assembly ofthisfountain.
2. Assemblethepump kit
a. Usingahoseclamp, attach the24”length of1/2”non-kink tubingto the
pump outlet.
b. Place thestopper around thepump cord about12”fromthepump.
3. Feed thepump cord through theholeand channelin thebasin (FT-197F).
4. FIRMLY press thestopper into theholeevenly.
a. Note: Usingthehandleofascrewdriverorhammer works best.
5. Place thepump house(FT-197D) overthepump and in thecenter ofthebasin
(FT-197F).
6. Place thepedestal(FT-197C)over thepump house(FT-197D).
BOTTOMOFURN (FT-197B)
7. Position theurn (FT-197B)overthepedestal(FT-197C).
8. InserttheCPVCpipealreadyconnected to the24”tubingassemblyinto the
CPVCcouplingin thebottomoftheurn (FT-197B).
9. Center theurn (FT-197B)on thepedestal(FT-197C).
INSIDEOFURN (FT-197B)
10. Slip the5/8”clear end ofthe12”tubingassemblyover theCPVCpipe
protrudingfromthebottomcenter oftheurn.
11. Position thewater featuredisc(FT-197A) over theurn (FT-197B).
12. InserttheCPVCpipealreadyconnected to the12”tubingassemblyinto the
CPVCcouplingin thebottomofthedisc(FT-197A).
13. Center thedisc(FT-197A) in theurn (FT-197B).
14. Fit thepump housedoor(FT-197E)into thepump house(FT-197D).
15. Insertthe#7 Drain stopper into thedrain holenextto theouter wall ofthebasin
(FT-197F).
16. Fill thefountain with water.