Campanola 776 User manual

CAN12
②
CAN12-2表紙 W205×H70(本文:W100×H70)
CAN12
取扱説明書
INSTRUCTION MANUAL

Thank you for your purchase of this Campanola watch.
Before using the watch, read this instruction manual carefully to ensure
correct use.
After reading the manual, store it in a safe place for future reference.
Visit the Citizen website (http://www.citizenwatch-global.com/) to view
visual guides for operation of your watch. Some models may be equipped
with external features (calculation scale, tachymeter, etc.). Visual guides for
operation of such external features can also be found on the website.
To check the movement number
A case number—4 alphanumeric characters and
6 or more alphanumeric characters—is engraved
on the case back. (Figure on the right)
The first 4 characters of the case number
represent the movement number of the watch.
In the example on the right, " " is the
movement number.
Engraving position example
The engraving position may differ
depending on watch model.
69

Safety precautions (IMPORTANT)
is manual contains the following instructions that should be strictly
followed at all times to prevent injury to yourself and other persons as well
as damage to property.
•Safety advisories are categorized and depicted in this manual as follows:
• Important instructions are categorized and depicted in this manual as follows:
DANGER Highly likely to cause death or serious injury.
WARNING Can cause serious injury or death.
CAUTION Can or will cause minor or moderate injury or damage.
Warning (caution) symbol followed by instructions that should
be followed or precautions that should be observed.
Warning (caution) symbol followed by prohibited matters.
70

71
<Protective stickers>
Be sure to remove any protective stickers that may be on your watch (case back, band,
clasp, etc.). Otherwise, perspiration or moisture may enter the gaps between the
protective stickers and the parts, which may result in a skin rash and/or corrosion of the
metal parts.
<Band adjustment>
We recommend seeking the assistance of an experienced watch technician for sizing of
your watch. If adjustment is not done correctly, the bracelet may unexpectedly become
detached leading to loss of your watch or injury.
Consult your nearest authorized Citizen Service Center.

72
How to use a specially designed crown
Some models are equipped with a specially designed crown and/or push button
to prevent accidental operation.
Screw down crown and screw down push button
Unlock the crown prior to operate your watch.
Unlock Lock
Screw
down
crown
Rotate the crown
counterclockwise
until it releases from
the case.
Push the crown in to
the case. With gentle
pressure towards the
case, rotate the crown
clockwise to secure it
to the case. Be sure to
tighten firmly.
Screw
down push
button
Rotate the
locking screw
counterclockwise, and
loosen until it stops.
Rotate the locking
screw clockwise,
and tighten firmly.

73
Ask for Customer Card (a card type warranty)
• Mail [Customer Registration Card] attached to the product on purchase to a Citizen
Technical Service Center, and ask for the Campanola Customer Card (a card type
warranty). You will be registered based on the [Customer Registration Card] and at the
same time, we will mail the Campanola Customer Card to you. Be sure to keep the
Customer Registration Card (a tentative warranty) with care until the Campanola Customer
Card reachs you.
• To clarify any unclear points concerning the customer card and customer registration,
contact the following Citizen Technical Service Center.
Citizen Technical Service Center
435, Shimotonooka, lida-shi, Nagano-ken (〒395-0195)
(0120) 28-1502

74
Contents
Please check the model number (Caliber No. ) of your
watch and refer to the instructions for your watch.
1. Main Features ............................................... 78
2. Names of Components ................................. 79
3. Before Use .................................................... 82
4. Setting the Reference Position...................... 84
5. Setting the Time ............................................ 86
6. Setting the Calendar ..................................... 89
7. Using the Chronograph................................. 92
8. Troubleshooting............................................. 97
9. Specifications................................................ 99
How to use a specially designed crown............... 72
Grand Complication
A.
P. 77
Cal. 677*

75
1. Features ..................................................... 118
2. Names of Components ............................... 119
3. Setting the Time .......................................... 120
4. Correcting the Time Difference
of the Local Time......................................... 122
5. Low Battery Warning Function .................... 123
6. Specifications.............................................. 124
Precautions........................................................ 125
Handling Your Watch
Warranty and After-Sales Service .................... 134
Customer Support Center ................................. 136
Service Information
Dual time
C.
P. 117
Cal. 776*
1. Features...................................................... 102
2. Component Names ..................................... 103
3. Viewing the Watch Indications .................... 105
4. Before Using the Watch
- Reference position verification -................ 107
5. Setting the Time .......................................... 108
6. Setting the Calendar ................................... 109
7. Calling the Calendar ................................... 110
8. Troubleshooting........................................... 112
9. Adjusting the Reference Positions .............. 114
10. Specifications.............................................. 116
Perpetual Calendar
B.
P. 101
Cal. 670*


Grand Complication
G
rand
CompliCation
Cal. No. 677 *
Grand Complication
A
.
1. Main Features ....................................... 78
2. Names of Components ......................... 79
3. Before Use ............................................ 82
4. Setting the Reference Position.............. 84
5. Setting the Time .................................... 86
6. Setting the Calendar ............................. 89
7. Using the Chronograph......................... 92
8. Troubleshooting..................................... 97
9. Specifications ........................................ 99

78
CAL. 677
*
1. Main Features
This watch is a multi-hand analog quartz watch equipped with minutes repeater function
using an electronic tone, perpetual calendar function, which corrects the date for each
month including leap years, and a chronograph function that is able to measure time for
up to 12 hours.

79
Grand Complication
* The illustrations in this instruction manual may differ from the actual appearance of your watch.
2. Names of Components
Moon age
Minute hand
Chronograph second hand
Crown
24 hour hand
Button (B)
Button (A)
Second hand
Year hand
Hour hand
Moon age correction
button
Day hand
Date hand
Month hand
Button (C)

80
CAL. 677
*
Display
Hand
Hour hand
Minute hand
Second hand
24 hour hand
Chronograph
second hand
Date hand
Day hand
Month hand
Year hand
Time/calendar Chronograph
Continuously indicates hours
Continuously indicates minutes
Continuously indicates seconds
Continuously indicates the 24 hour clock
—
Chronograph seconds
Continuously indicates the date
Continuously indicates the day
Month or minutes
(when chiming) Chronograph minutes
Year or hours
(when chiming) Chronograph hours
Functions of Each Hand

81
Grand Complication
Crown
position
display
Button (A)
Normal position
Time/calendar Chronograph
Setting the calendar
Setting the time
—
Zero position
check/Split/
Reset
Yearly/Monthly
correction:
Clockwise direction
Setting of chime:
Clockwise
direction
1st position 2nd position
Button (B) Chime Start/Stop
Yearly/Monthly
correction: Counter-
clockwise direction
Setting of chime:
Counter-
clockwise
direction
Button (C) To chronograph
display
To time/
calendar Date correction
—
Crown
— — —
Setting of hour,
minute, 24 hour
clock and day
Moon age
correction
button
Moon age correction (can be performed at any time regardless of crown
position)
Functions of Each Button

3. Before Use
Before using this watch, please check the reference positions of each hand using the following
procedure to ensure that each function operates properly.
Reference position:The initial position of each hand to ensure that this
watch functions properly.
Confirmation of Reference Position
1) Put the crown in the normal position.
• Press button (C) for at least 2 seconds to switch to the chronograph display. Check that the
hands are at the positions indicated below.
Chronograph second hand : 00.00 seconds
Year and month hands: 00:00 (12:00 position)
• Press button (A) for at least 2 seconds and check that the date hand is at the position
indicated below.
Date hand: ▼(Between 31 and 1)
2) Once you have confirmed that the hands are at the reference position, press button (C) for at
least 2 seconds to return the watch to the time and calendar display.
* If the hands are not at the reference position, set the reference position of each hand by
following the procedure described in “4. Setting the Reference Position” on the following
page.
82
CAL. 677
*

83
Grand Complication
(A)
(B)
(C)

4. Setting the Reference Position
The hands of the watch will not indicate the correct positions unless the reference position is set
properly. If the reference position has changed, reset it by following the procedure described
below.
* The reference position must also be reset after the battery has been replaced.
Perform the All-Reset procedure
If the crown is returned to the normal or 1st position without setting the
reference position after performing the All-Reset procedure, the reference
position failure alarm will be activated. At this time, the date hand will turn
counter-clockwise indicating that the reference position has not been set.
When this happens, pull out the crown to the 2nd position again, and perform
the procedure for setting the reference position.
84
CAL. 677
*
(A)
(B)
(C)
1) Pull out the crown to the 2nd position.
2) Press buttons (A), (B) and (C) simultaneously.
3) When the buttons are released, the hands will move
in the order of the chronograph secondhand, date
hand, and year and month hands. A tone will sound
confirming that All-Reset has been performed when
this procedure is completed.

85
Grand Complication
Setting the Reference Position
1) Press button (A) and set the year and month
hands to 00:00.
2) Press button (B) and set the chronograph
second hand to 00.00 seconds.
3) Press button (C) and set the date hand to
the ▼position.
• Pressing button (A), (B) or (C)
continuously causes the hands to advance
rapidly.
4) Always make sure to return the crown to
the normal position.
* After setting the reference position, always make sure to reset the time (basic time and
minutes repeater time) and the calendar.
(A)
(B)
(C)

86
CAL. 677
*
5. Setting the Time
Setting the Time and Day of the Basic Clock
Once the time has been set for the basic clock,
always make sure to set the time of the minutes
repeater according to the time of the basic
clock.
If the time is different between the basic clock
and minutes repeater, the chime will not sound
at the correct time shown on the basic clock
(current time).
1) Pull out the crown to the 2nd position so that the second
hand stops at 0 seconds.
2) Turn the crown in the clockwise direction (so that the
hour and minute hands rotate clockwise) to set the day.
• The day can be corrected rapidly by moving the hands back and forth between 9:00 PM and
1:00 AM.
3) Turn the crown either to the right or left to set the hours, minutes and 24 hour hand to the
current time.
• Set the time while paying attention to AM and PM by looking at the 24 hour hand.
4) Always make sure to return the crown to the normal position.
(A)
(B)
Hour hand
Minute
hand 24 hour
hand
Day hand Second
hand
(C)

87
Grand Complication
Setting the Time of the Minutes Repeater
1) Pull out the crown to the 2nd position so that
the second hand of the basic clock stops at 0
seconds.
2) Push button (A) or (B) and set the year and
month hands to the time of the basic clock.
• Button (A) : Hands move forward 1 minute
each time it is pressed.
• Button (B) : Hands move backward 1 minute
each time it is pressed.
Pressing button (A) or (B) confinuosly causes
the hands to advance rapidly.
3) The basic time and minutes repeater time can be synchronized with a telephone time
service or other official time service by pushing in the crown to the 1st or normal
position at the same time you hear the tone.
4) The minutes repeater time will return to the year and month display when the crown is
pushed in. Setting the minutes repeater time to the time in another city based on the
time of the basic clock enables the minutes repeater time to be used to indicate local
time in that city. Press button (B) to find out the local time.
(A)
Month
hand
Year hand
(B)
(C)
Table of contents
Other Campanola Watch manuals