Campbell Hausfeld PL150296 Installer manual

Visit us online: www.chpower.com
18
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Air Tools
Air Tools
• 130 ft. lbs. ultimate torque
• 1,200 impacts per minute
• Patented single impact mechanism provides 20% more
working torque
• Balanced, compact, ergonomic design for increased comfort
3/8” Impact Wrench TL1149
• 250 ft. lbs. ultimate torque
• Built-in power regulator to control speed and torque
• Push button forward/reverse valve for fast change
of direction
1/2” Impact Wrench TL0502
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
4.5
5.1
• 275 ft. lbs. of torque for fast removal of lug nuts
and bolts in overall automotive service, bodyshop,
farm and light truck work
• Forward/reverse switch for one-handed directional
changes
• Patented balanced ergonomic design for comfort
during continuous use
• Patented single hammer impact mechanism
provides 20% more working torque
• Exhaust diffuser for quiet operation
1/2” Impact Wrench TL1102
5.4

19
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Or call CH Air Tools at: 1- 800-543-6400
Air Tools
• 380 ft. lbs. ultimate torque
• 1,000 impacts per minute
• Heavy-duty square drive for automotive, farm and
light truck work
• Powerful pin clutch mechanism for balanced operation
1/2” Impact Wrench PL150296
Finish your automotive and woodworking projects faster and
easier with the benefits of air power. Air tools provide more
power than electric tools. Air tools are lighter and more com-
pact compared to their electric counterpart. They are easier
to maintain and operate with fewer moving parts. Air tools
also operate at cooler temperatures. Experience the benefits
of Campbell Hausfeld®air tools including ergonomic designs and
high performance for tough jobs.
5.1
• Alloy and cast iron components
• 2” extended anvil
• Variable power regulator and forward/reverse
• Mufflered handle exhaust
1/2” Impact Wrench (2” anvil) PL255698
• 450 ft. lbs. ultimate torque
• 1,200 impacts per minute
• Powerful and balanced twin hammer impact mechanism
for maximum output and smoothness
• Adjustable power regulator for both forward and reverse directions
1/2” Impact Wrench PL250298
• 1,000 ft. lbs. of torque, provides power to remove and
replace fasteners on semi-trucks and other large vehicles
• Two piece housing for ease of service
• Pistol grip handle provides comfort during use
• Powerful pin clutch mechanism for balanced operation
3/4” Impact Wrench PL1586
5.1
6.1
5.1
Air Tools
1/2” Impact Wrench TL1302
• 350 ft. lbs. ultimate torque
• 850 impacts per minute
• Powerful and balanced twin hammer impact mechanism
for maximum output and smooth operation
• Ergonomic design for increased comfort
4.8
Why Use Air Powered Equipment?

Visit us online: www.chpower.com
20
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Air Tools
• 25 ft. lbs. of torque for fast removal
and installation of nuts and bolts in
dashboard work
• Ball socket retainer provides fast and
easy socket replacement
• Smaller than a standard 3/8” air
ratchet, for use in tighter more
compact areas
1/4” Ratchet TL1147
• 1,100 ft. lbs.
ultimate torque
• 600 impacts per
minute
• 1/2” NPT air inlet
• Superior construc-
tion for truck tire
work and heavy
equipment service
• Two stage air
compressor is
required
1” Impact Wrench PL1557
• 75 ft. lbs. ultimate torque
• 1,000 impacts per minute
• Great for small fastener work in engine
and body repairs
• Includes swivel air inlet connection
3/8” Butterfly Impact Wrench TL1017
Impact Wrenches & Ratchets
17.5
4.1
2.4

21
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Or call CH Air Tools at: 1- 800-543-6400
Air Tools
• At 18 ft. lbs. of torque, provides the power to
remove and install small nuts and bolts in
under the dashboard work, small engine repair
and bodywork
• Ball socket retainer provides fast and easy
socket replacement
• Small size allows for reach into areas that a conventional
3/8” ratchet could not reach
1/4” Ratchet PL1547
• At 50 ft. lbs. of torque, provides the power
to remove and install nuts and bolts
• Ball socket retainer provides fast and easy
socket replacement
3/8” Ratchet TL1001
3.2
4.8
• At 25 ft. lbs. of torque, provides the power to
remove and install nuts and bolts
• Ball socket retainer provides fast and easy
socket replacement
• Smaller than a standard 3/8” air ratchet, allows
for use in tighter more compact areas
3/8” Ratchet TL1101
• At 55 ft. lbs. of torque, provides the power
to remove and install nuts, bolts and spark
plugs during engine repair, tune-ups and
radiator work
• Heat treated ratcheting components for
increased durability
• Soft Santoprene® elastomer grip provides
increased comfort during continuous use
3/8” Ratchet PL150198
1/2” Ratchet PL1548
• 90 ft. lbs. of torque provides the power to remove
and install large fasteners on outboard engines,
tractors and other heavy machinery
• Ball socket retainer provides fast and easy
socket replacement
• Extra long handle provides better handling during
operation and additional power for stubborn fasteners
Ratchets
8.0
4.8
4.1

Visit us online: www.chpower.com
22
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Air Tools
• 25,000 RPMs provides the speed for grinding, porting,
smoothing, general polishing and deburring
• Patented lightweight engineered composite housing
reduces fatigue and protects against cold temperatures
• Ideal for use on a variety of materials including: wood,
metal, plastic, ceramic and cast iron
• Standard 1/4” collet for all types of accessories
• Exhaust diffuser for quiet operation
Die Grinder TL1120
• 25,000 RPMs
• Great for high speed grinding, porting,
smoothing, general polishing and deburring
in medium duty work
• Compact size allows for use in confined areas
• Front exhaust
Die Grinder PL1520
• At 22,000 RPMs, provides the speed to grind, port,
smooth, polish and deburr most materials including
wood, metal, plastic, ceramic and cast iron
• 1/2 horsepower motor provides more power than
a standard die grinder
• Patented lightweight engineered composite housing
reduces fatigue and protects against cold temperatures
• Standard 1/4” collet for all types of accessories
• Exhaust diffuser for quiet operation
Full Size Die Grinder TL1121
• 25,000 RPM
• Great for high speed grinding, porting, smoothing, general
polishing and deburring in medium duty work
• Compact size allows for use in confined areas
• Front exhaust
Full Size Die Grinder PL252199
11.0
8.1
10.7
6.2
Die Grinders

23
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Or call CH Air Tools at: 1- 800-543-6400
Air Tools
• 18,000 RPMs
• Pistol design is ideal for gasket removal and surface
conditioning applications
• Extended trigger for ease of operation and
increased comfort
• Patented balanced ergonomic design for increased
comfort during continuous use
Angle Die Grinder TL1141
5.8
• At 18,000 RPMs, provides the speed to perform general
grinding, porting, gasket removing, general polishing
and deburring in confined areas
• Soft Santoprene® elastomer grip provides increased
comfort during continuous use
• Includes 1/4” and 1/8” collets for all types of accessories
Angle Die Grinder PL154199
7.8
• At 11,000 RPMs, provides the power for fast material removal
• Ideal for cleaning, deburring, grinding and high
amounts of rust or material removal
• Equipped with a side handle for better handling
during operation accessories
4”Angle Grinder PL1555
11.0
11.8
• 20,000 RPMs provides the speed and power to
cut through 1” diameter steel rods, fiberglass,
copper/aluminum tubing, and angle iron
up to 1/2”
• Adjustable swivel safety guard provides better
safety and maneuverability
• Patented lightweight engineered composite
housing reduces fatigue and protects against cold temperatures
• Trigger safety-lock mechanism prevents accidental start-ups
• Exhaust diffuser for quiet operation
Cut-Off Tool TL1135
• At 23,000 RPMs, provides the speed and power to cut
through 1” diameter steel rods, fiberglass,
copper/aluminum tubing, and angle iron up to 1/2”
• 3/4 horsepower motor provides more power than
a standard cut-off tool
• Soft Santoprene® elastomer grip provides increased
comfort during continuous use
• Built-in power regulator to control speed in detail cutting
• Equipped with guards and safety catches to prevent injury
Cut-Off Tool PL253599
11.5
Grinders & Cut-Off Tools

Visit us online: www.chpower.com
24
Cutting Tools
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Air Tools
• At 2,500 strokes per minute, makes clean cuts
into 18 gauge cold rolled steel
• Designed to cut angles and squares in sheet
metal, aluminum, rubber and plastic
• Great for duct work and autobody repair
Metal Shear PL1543
• 5 mm punch diameter, 1/2” flange depth
• Prepares sheet metal for riveting, brazing or welding
Punch/Flange Tool PL1550
• 1 5/8” (41 mm) stroke provides the power for general
cutting, chipping and scraping
• Cuts, chips and scrapes most materials and is used for
light duty automotive exhaust removal, front-end work
and masonry
• Patented balanced, lightweight, ergonomic design provides
increased comfort and reduces fatigue
• Includes 2 chisel bits
15/8” Stroke Hammer TL1103
0.1
6.0
6.7
• At 10,000 strokes per minute, provides the
cutting power to cut up to 16 gauge steel
• Designed to cut plastic, aluminum, fiberglass and
sheet metal on flat and curved surfaces
• Equipped with safety latch to prevent accidental s tarts
Reciprocating Saw PL1540
1.5
• At 3,800 strokes per minute, provides the cut-
ting power to cut up to 16 gauge steel
• Designed to cut intricate patterns in sheet metal
and aluminum without leaving burrs
Air Nibbler PL1519
7.8

25
Air Hammers & Drills
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Or call CH Air Tools at: 1- 800-543-6400
Air Tools
• 2 5/8” (67 mm) stroke provides the power for
panel cutting and other cutting needs
• Cuts, chips and scrapes most materials and is used for medium
duty automotive exhaust removal, front-end work and masonry
• Soft Santoprene® elastomer grip provides increased comfort
during continuous use
• Built-in power regulator to control speed during use
25/8” Stroke Hammer PL153499
• 2,300 RPMs provides the speed to drill, hone, and
ream metal, wood, and concrete
• Compact and maneuverable for demanding jobs
Air Powered Drill TL1006
5.5
11.0
• Used to drill, hone, saw and wire brush most metal or
wood materials
• Durable Jacobs® chuck for reliable bit replacement
• Soft Santoprene® elastomer grip provides increased
comfort during continuous use
• Reversible to assist when binding occurs and for
replacing screws
3/8” Reversible Drill PL154599
9.2
3/8” Air Drill TL1106
• 2,400 RPMs provides the speed to drill, hone, saw and
wire brush most metal or wood materials
• Compact and maneuverable for demanding jobs
• Patented balanced ergonomic design provides
increased comfort
• Extended trigger for ease of operation and increased comfort
• Lightweight engineered composite housing reduces fatigue
7.2
• 3 1/2” (89 mm) stroke provides
the power for bolt cutting
and other cutting needs
• Cuts, chips and scrapes
most materials and is used
for heavy-duty automotive
exhaust removal, front-end
work and masonry
• Equipped with quick connect
chisel retainer for fast chisel
changes
11.0
35/8” Stroke Hammer PL2534
INCLUDES QUICK CHANGE
CHISEL RETAINER

Visit us online: www.chpower.com
26
Drills & Sanders
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Air Tools
• Used to drill hone, ream, hole saw and wire brush
most metal or wood materials
• Durable Jacobs® chuck for reliable bit replacement
• Angle head for use in confined areas
3/8” Angle Drill PL1544
1/2” Reversible Drill PL154699
• Used to drill, hone, saw and wire brush most metal
or wood materials
• Durable keyless Jacobs® chuck for fast and easy
bit changes
• Reversible to assist when binding occurs and for
replacing screws
• Soft Santoprene® elastomer grip provides increased
comfort during continuous use
• 10,000 RPMs
• Designed for sanding wood, metal, fiberglass
and autobody fillers
• Best when used for blending and smoothing
filler in light duty applications
Dual Action Sander TL1004
10.0
5.9
10.7
3/8” Keyless Chuck Reversible Drill PL254599
• Used to drill, hone, saw and wire brush most metal
or wood materials
• Durable keyless Jacobs® chuck for fast and easy bit cha nges
• Reversible to assist when binding occurs and for
replacing screws
• Soft Santoprene® elastomer grip provides increased comfort
during continuous use
9.2

27
Sanders
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Or call CH Air Tools at: 1- 800-543-6400
Air Tools
• 18,000 RPMs provides the speed for rough material removal,
weld smoothing, body filler removal and rough shaping of filler
• Lightweight engineered composite housing reduces fatigue
• Patented, balanced ergonomic design for increased
comfort during operation
• Extended trigger for ease of operation and
increased comfort
• Includes 3 back-up pads (3”, 4 1/2” and
5 1/2”) for varying applications
5” High Speed Sander TL1118
• 4,500 SPMs
• Designed to smooth welds, remove rust
and remove body filler
7” Sander PL1551
Random Orbit Sander PL1565
• 10,000 RPMs
• Ideal for sanding wood, body filler, fiberglass,
metal and other surfaces
• Swirl-free, efficient fine finish sanding
Random Orbit Sander with Self-
Generating Vacuum System PL1566
• 10,000 RPMs
• Ideal for sanding wood, body filler,
fiberglass, metal and other surfaces
• Swirl-free, efficient fine finish sanding
• Self-generating vacuum bag to collect dust
• 8,000 SPMs
• Designed for sanding wood, metal, fiberglass
and autobody fillers
• Palm trigger for easy on/off action
Jitterbug Sander TL1005
12.3
11.6
15.1
11.6
9.0
• 10,000 RPMs for swirl-free finishes
• Designed for sanding wood, metal, fiberglass and
autobody fillers
• Soft Santoprene® elastomer grip provides increased
comfort during continuous use
• Patented ergonomic design provides increased
comfort during prolonged use
Dual Action Sander PL150499
13.0

Visit us online: www.chpower.com
28
Air Tool Kits
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Air Tools
• Perfect start-up kit for the home mechanic
• Includes: 3/8” ratchet, 1/2” impact wrench,
siphon-feed spray gun, (2) 1/2” deep well
impact sockets: 3/4”, 13/16”, (3) 1/2” shallow
well impact sockets: 1/2”, 9/16”, 5/8”, 3/8”(F)-
1/2” (M) socket adapter, blowgun, (5) blow gun
accessories, dual air chuck, tire gauge, 25’ recoil
hose, 1/4” NPT(F) industrial coupler, (4) 1/4” NPT(M)
industrial plug, 1/4” NPT(F) industrial plug, PTFE thread
sealant tape, air tool oil, and blow mold case
5.1
• Includes: 3/8” ratchet, 1/4” die grinder,
(4) 3/8” impact sockets, (2) 1/4” grinding
stones, 1/4” NPT(F) industrial coupler, (2)
1/4” NPT(M) industrial plugs, (2) die grinder
wrenches, air tool oil, and blow mold case
6.0
• Includes: 1/2” impact wrench,3/8” air ratchet, 1 5/8”
stroke air hammer, (10) sockets, 3” extension bar,
3/8” socket-screw bit adapter, (20) screwdriver bits,
(3) chisel bits, chisel retainer spring , 3/8” (F)-1/2”
(M) socket adapter, 1/4” swivel adapter, 1/4” NPT(F)
coupler , (5) 1/4” I/M plugs 1/4” NPT(M), 1/4”
NPT(M) hose coupling, 1/4” NPT(F) hose
coupling, blowgun, (6) blowgun accessories,
1/4” NPT tire chuck, pencil tire gauge,
roll of PTFE thread sealant tape, bottle of air
tool oil, 4 mm Allen wrench, blow molded case
6.1
• Includes: 3/8” ratchet, 1/2” impact wrench, 1/2”
impact sockets (1/2” 9/16”, 5/8”, 11/16”, 10 mm,
12 mm, 15 mm, 17 mm, 19 mm, and 21 mm) 3/4”-
13/16” SAE flip socket, 3/8” (F)-1/2” (M) socket
adapter, 3” extension, (2) 1/4” industrial plugs, air
tool oil, and carrying case
5.1
• Great for do-it-yourself projects
• Includes: 1/2” impact wrench, 1-5/8” stroke air
hammer, 3/4”-13/16” SAE flip socket, 3”
extension, (4) chisel bits, chisel spring retainer,
blowgun, (3) 1/4” industrial plugs, air tool oil,
and carrying case
6.0
19 Piece Tool Kit TL1010
27 Piece Tool Kit TL1063
Ratchet, Die Grinder Kit TL1067
62 Piece Tool Kit TL1069
15 Piece Tool Kit TL1061
*Not stocked as an everyday item
*Not stocked as an everyday item

29
Air Tool Kit & Sandblasters
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
1F7C36=4U\YfUbi0) @C9
1F7C36=BUaeYbU]U^d0) @C9
Or call CH Air Tools at: 1- 800-543-6400
Air Tools
• Includes: 1/2” impact wrench, 3/8” air ratchet, 1 5/8”
stroke air hammer, (17) impact sockets, 3” extension
bar, 3/8” socket-screw bit adapter, (21) screwdriver
bits, (4) chisel bits, chisel retainer spring, 3/8” (F)-1/2”
(M) socket adapter, 1/4” NPT(F) coupler, (5) 1/4” I/M
plugs 1/4” MPT(M), 1/4” NPT(M) hose coupler,
1/4” NPT(F) hose coupler, blowgun, (6) blow gun
accessories, 1/4” NPT(F) tire chuck, pencil tire gauge,
roll of PTFE thread sealant tape, bottle of
air tool oil, 4 mm Allen wrench, and blow
molded case
6.1
• Draws abrasives from bucket or bag
• Designed to remove rust, scale and paint as well
as etch glass and weather wood
• Includes: sandblast gun with ceramic nozzle, 10’
hose, steel pick-up tube and Allen wrench
11.5
• Hopper holds 30 lbs. of abrasive for approximately
50 minutes of blasting
• Shoulder strap for added mobility
• Designed to remove rust, scale and paint as
well as etch glass and weather wood
• Includes: sandblast gun with ceramic nozzle,
material hose and hopper
11.5
• Hopper holds 60 lbs. of abrasive for approximately
100 minutes of blasting
• Designed to remove rust, scale and paint as well
as etch glass and weather wood
• Includes: sandblast gun with ceramic nozzle,
material hose and hopper
9.0
• Hopper holds 120 lbs. of abrasive for approximately
200 minutes of blasting
• Wheels provide added mobility
• Includes: gun with ceramic nozzle, material hose,
hopper, and wheels
9.0
70 Piece Garage Tool Kit TL1070
Sandblasting Kit AT1226
30 lb. Capacity Sandblaster AT1251
60 lb. Capacity Sandblaster AT1210
120 lb. Capacity Sandblaster AT1211
*Not stocked as an everyday item