Campbell Hausfeld XT051000 User manual

3/8 inch Reactionless Ratchet
Operating Instructions
Model: XT051000
IN745200 6/17
© 2017 Campbell Hausfeld
A Marmon/Berkshire Hathaway Company
EN

REGISTER YOUR PRODUCT ONLINE NOW! www.campbellhausfeld.com/reg
READ AND FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS • DO NOT DISCARD
Please read and save these instructions. Read carefully before
attempting to assemble, install, operate or maintain the product
described.
Protect yourself and others by observing all safety information. Failure
to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
Model #: ________________________________
Serial #: ________________________________
Purchase Date: __________________________
For parts, product & service information
visit www.campbellhausfeld.com
Campbell Hausfeld
100 Production Drive
Harrison, Ohio 45030

1
BEFORE YOU BEGIN
Description
If your job calls for power, control and the ability to work in a confined
space, this is the ratchet to get stuff done. The reactionless feature means
no more knuckle-busting as the clutch internally absorbs the impact instead
of transferring it to your hand/wrist. Just to prove that we understand your
requirements, this trigger mechanism is designed to extend your reach and
activate in super tight places.
Campbell Hausfeld®makes it easier for you to finish your projects like a pro.
The company’s history of creating quality products began in 1836, when
it manufactured horse-drawn wagons and agricultural equipment. Today,
Campbell Hausfeld offers a complete line of air compressors, air tools and
accessories, inflators, nailers and staplers, spray guns, pressure washers, and
more. Finish your projects faster and easier with Campbell Hausfeld – The Air
Power Expert.
UNPACKING
After unpacking the unit, inspect carefully for any damage that may have
occurred during transit. Check for loose, missing or damaged parts. Check
to be sure all supplied accessories are enclosed with the unit. In case of
questions, damaged or missing parts, please visit www.campbellhausfeld.com
for customer assistance.
Do not operate unit if damaged during shipping,
handling or use. Damage may result in bursting and
cause injury or property damage.
Other Parts (Not Provided)
You will need the following items and/or accessories to properly set-up and
optimally use your GSD 3/8 inch reactionless ratchet:
• 1/4 inch Plug NPT (M)
o For less stress on your air hose and you, try a flex plug.
• 3/8 inch (ID) Air Hose
• 1/4 inch Coupler NPT (F)
o Eliminate coupler confusion with a universal coupler style.
o Quick-connect couplers quickly, easily join hoses to tools.
o If you don’t use a flex plug, consider a swivel coupler to prevent
hose kinks and reduce stress on your air hose.
• 4 Gallon air compressor or larger
• Impact drive sockets
• PTFE tape for all fitting connections
• Adjustable wrench for tightening fitting connections
• Grease injection gun for gear lubrication
See www.campbellhausfeld.com for additional information on accessories to
support your air tools and pneumatic system.

2
BEST PRACTICES
u For best output, maintain pressure at the tool of 90 PSI.
u The longer your air hose the greater the pressure drop from compressor to tool.
If you are using a hose longer than 50 feet, consider upgrading to a 1/2 inch ID air
hose to ensure proper tool pressure.
u Failure to lubricate and maintain your air tools properly will dramatically shorten
their life. Use oil every time you use your air tool to lubricate, clean and inhibit rust
in one step. Campbell Hausfeld sells air tool oil under part number ST1270.
SPECIFICATIONS
XT051000
Maximum PSI 90
CFM under load 100% duty 1.9 CFM @ 90 PSI
CFM no load 100% duty 3.4 CFM @ 90 PSI
SCFM under load 100% duty 14.3 SCFM @ 90 PSI
SCFM no load 100% duty 24.6 SCFM @ 90 PSI
Air Compressor Recommendation 4 gallon
Max Torque 75 Ft. Lbs.
Working Torque 0 - 50 Ft. Lbs.
Rated RPM (free speed) 320
Impact Speed (IPM) 1,600
Speed Control Trigger
Direction Change
Reverse 1
Forward 1
Gear Type Pin Clutch
Bolt Capacity 3/8 inch
Air Inlet 1/4 inch NPT (F)
Minimum Hose Size 3/8 inch
Anvil 3/8 inch
Housing Material Composite
Tool Weight 2.8 Lbs.
Tool Length 11-1/4 inch
Tool Width 2-1/4 inch
Tool Height 1-7/8 inch

3
GETTING TO KNOW YOUR UNIT
SET UP INSTRUCTIONS
BEST PRACTICES
uThe air compressor used with your reactionless ratchet must be able to maintain
a minimum of 90 PSI when the tool is being used. An inadequate air supply can
cause a loss of power and inconsistent tool output/performance.
u A pressure regulator—used at the tool--is helpful to control the operating pressure
of the tool and maintain 90 PSI.
u Use an oiler to provide oil circulation through the tool and a filter to remove liquid
and solid impurities which can rust or “gum up” internal parts of the tool.
u To disconnect a coupler/plug from a system set-up: push the coupler and plug
together before pulling the coupler sleeve back and separating the coupler and
plug.
u Use only sockets specifically rated as “impact” drive sockets. Non-impact drive
sockets—if used with air tools—can shatter causing serious personal injury.
* Items shown in Set Up Instructions are not included with this tool.
Air Inlet
Exhaust Port
Anvil
Trigger
Forward-Reverse Knob
Flush-type Grease Fitting
Plug
Quick
Coupler
Air Hose

4
LUBRICATION
Motor:
To protect your tool, lubricate the motor every time—before and after—
you use this tool. You cannot oil the motor too often or put too much oil in
the air inlet.
1. Disconnect the reactionless ratchet from air supply.
2. Turn the tool upside down.
3. While pulling the trigger, pour approximately a teaspoon of air tool oil
in the air inlet. Campbell Hausfeld makes an air tool oil under model
number ST1270.
4. Connect the tool to the air supply and cover the exhaust port with a
towel. Run the reactionless ratchet for about 10 seconds. Oil will spray
from the exhaust port when the tool is triggered.
5. Continue to run until no oil is discharged.
6. Wipe all residual oil from tool before use.
Gears:
Periodic lubrication of the impact mechanism
through the flush-type grease fitting will extend
the life of the ratchet. Under regular use, inject
a small amount grease to the flush-type grease
fitting with a grease injection gun every week.
OPERATING INSTRUCTIONS
To remove a nut, bolt or spark plug:
1. Set ratchet head to run in the reverse
direction by depressing the forward/reverse
knob and turning it clockwise to remove a
bolt, nut or spark plug.
2. Attach the appropriate sized IMPACT socket
on the anvil and press firmly until socket is
seated over the ball retainer.
3. Place socket over nut or bolt and squeeze
trigger until nut or bolt has been removed or
installed.
To install a nut, bolt or spark plug:
Follow the above directions BUT set the ratchet head to run in the forward
direction by depressing the forward/reverse knob and turning it counter
clockwise to the forward position.
Do not overtighten when using your air-powered impact ratchet. Use a
torque wrench to attain the proper torque manually.

5
BEST PRACTICES
u To prevent cross-threading, start your nuts/bolts by hand—and try to get a few
rotations—before continuing the job with your pneumatic tool.
uThe forward/reverse knob rotates as the ratchet is activated/triggered. Be sure to
keep your hands away from moving parts during operation—including this knob.
u The reactionless ratchet should never be used to set torque. Use a torque wrench
to attain the proper torque manually. Do not over tighten.
STORAGE
Lubricate your reactionless ratchet before storing. Follow the air motor
lubrication instructions with an exception to step #4. Only run the
reactionless ratchet for 2-3 seconds (instead of 10 seconds) because more oil
needs to remain in the reactionless ratchet when storing. Store your tool in a
cool dry place.
TECHNICAL SERVICE
For information regarding the operation or repair of this product, please visit
www.campbellhausfeld.com.
SAFETY INSTRUCTIONS
This manual contains information that is very important to know and
understand. This information is provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help recognize this information, observe the
symbols found on page 10. The Safety Symbols throughout this manual are
to alert you to important safety hazards and precautions.
The DANGER, WARNING, CAUTION, and NOTICE notifications
and instructions in this manual cannot cover all possible condi-
tions and situations that may occur. It must be understood by
the operator that caution is a factor which cannot be built into
this product, but must be supplied by the operator.
With any piece of equipment, new or used, the most important part of its
operation is SAFETY!
Campbell Hausfeld encourages you to familiarize yourself with your new
equipment and stresses safe operation.
The next few pages of this manual are a summary of the main safety aspects
associated with this unit. Be sure to read and understand completely before
operating the machine.
The symbols used throughout the operation and maintenance sections of
this manual call attention to safety procedures.
Important Safety Information
Please read and save these instructions. Read carefully before attempting to
assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with
instructions could result in personal injury and/or property damage! Retain
instructions for future reference.

6
SAFETY INSTRUCTIONS (CONTINUED)
This manual contains important safety, operational and maintenance
information. If you have any questions, please visit
www.campbellhausfeld.com for customer assistance.
California Proposition 65
This product can expose you to chemicals including
lead, which are known to the State of California
to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
Illinois Lead Poisoning Prevention Act
Contains lead. May be harmful if eaten or chewed.
Complies with Federal Standards.
General Safety
This product is a part of a high pressure system and the following safety
precautions must be followed at all times along with any other existing safety
rules.
a. To reduce the risks of electric shock, fire, and injury to persons, read all
the instructions before using the tool.
b. Be thoroughly familiar with the controls and the proper use of the
equipment. Follow all instructions. Contact your Campbell Hausfeld
representative if you have any questions.
c. Only persons well acquainted with these rules of safe operation should
be allowed to use the unit.
Read and understand tool labels and manual.
air tool (90 PSI). The air tool could explode and result
in death or serious personal injury.
Work Area
a. Keep the work area clean and well lighted. Cluttered benches and dark
areas increase the risks of electric shock, fire, and injury to persons.
b. Do not operate the tool in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. The tool is able to create
sparks resulting in the ignition of the dust or fumes.
c. Keep bystanders, children, and visitors away while operating the tool.
Distractions are able to result in the loss of control of the tool.
Personal Safety
a. Stay alert. Watch what you are doing and use common sense when
operating the tool. Do not use the tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention
while operating the tool increases the risk of injury to persons.
b. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair increases the risk of injury to persons as a result of
being caught in moving parts.

7
c. Avoid unintentional starting. Be sure the switch is off before connecting
to the air supply. Do not carry the tool with your finger on the switch or
connect the tool to the air supply with the switch on.
d. Remove adjusting keys or wrenches before turning on the tool. A key
or wrench attached to a rotating part of the tool may result in personal
injury.
e. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the tool in unexpected
situations.
f. Use safety equipment. A dust mask, non-skid safety shoes and a hard
hat must be used for the applicable conditions.
g. Always wear eye protection.
h. Always wear hearing protection when using the tool. Prolonged
exposure to high intensity noise is able to cause hearing loss.
i. Do not attach the hose or tool to your body. Attach the hose to the
structure to reduce the risk of loss of balance if the hose shifts.
Always remain in a firmly balanced position
when using or handling the tool.
Avoid long extended periods of work with the
tool. Stop using the tool if you feel pain in
hands or arms.
j. Hold tool by insulated gripping surface when performing an operation
where the tool may contact hidden wiring. Contacting a “live” wire will
make exposed metal parts of the tool “live” and shock the operator.
k. Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if
your body is grounded.
l. Explore the workpiece to avoid contact with hidden wiring. Thoroughly
investigate the workpiece for possible hidden wiring before performing
work. Contact with live wiring will shock the operator.
m. Never point an air tool at oneself or any other person. Serious injury
could occur.
n. Do not put hands near or under moving parts.
Tool Use and Care
a. Use clamps or another practical way to secure and support the
workpiece to a stable platform. Holding the work by hand or against
the body is unstable and is able to lead to loss of control.
b. Do not force the tool. Use the correct tool for the application. The
correct tool will do the job better and safer at the rate for which the
tool is designed.
c. Do not use the tool if the switch does not turn the tool on or off. Any
tool that cannot be controlled with the switch is dangerous and must be
repaired.
d. Disconnect the tool from the air source before
making adjustments, doing tool maintenance,
clearing jams, leaving work area, loading, or unloading the tool. Such
precautionary measures reduce the risk of injury to persons.
e. Store the tool when it is idle out of reach of children and other
untrained persons. A tool is dangerous in the hands of untrained users.

8
SAFETY INSTRUCTIONS (CONTINUED)
f. Maintain the tool with care. Keep a cutting tool sharp and clean. A
properly maintained tool, with sharp cutting edges reduces the risk of
binding and is easier to control.
g. Check for misalignment or binding of moving parts, breakage of parts,
and any other condition that affects the tool’s operation. If damaged,
have the tool serviced before using. Many accidents are caused by poorly
maintained tools. There is a risk of bursting if the tool is damaged.
h. Use only accessories that are identified by the manufacturer for the
specific tool model. Use of an accessory not intended for use with the
specific tool model increases the risk of injury to persons.
i. Selecting an appropriate tool actuation system, taking into consideration
the work application for which the tool is used.
Never use gasoline or other flammable liquids to
clean the tool. Never use the tool in the presence
of flammable liquids or gases. Vapors could ignite by a spark and cause an
explosion which will result in death or serious personal injury.
Release all pressure from the system before
attempting to install, service, relocate or perform
any maintenance.
Always disconnect tool from the power source
when unattended, performing any maintenance or
repair, clearing a jam, or moving the tool to a new location.
After an air tool has been lubricated, oil will
discharge through the exhaust port during the first
few seconds of operation. Thus, the exhaust port must be covered with a
towel before applying air pressure. Failure to cover the exhaust port can
result in serious injury.
When tightening, do not torque down the nuts
or bolts with the ratchet as typically done with a
hand wrench. This can damage the tool by breaking parts in the ratchet
mechanism.
Use of a whip hose prevents accidental triggering of
the tool when pressurized air is connected to the
system.
Always fit tool with a fitting or hose coupling
on or near the tool in such a manner that all
compressed air in the tool is discharged at the time the fitting or hose
coupling is disconnected. Do not use a check valve or any other fitting which
allows air to remain in the tool. Death or serious personal injury could occur.
Never carry the tool by the air hose or pull the hose
to move the tool or a compressor. Keep hoses away
from heat, oil and sharp edges. Replace any hose that is damaged, weak or
worn. Personal injury or tool damage could occur.
Do not operate or allow anyone else to operate the
tool if any warnings or warning labels are not
legible. Warnings or warning labels are located on the tool magazine and
body.
!
WARNING

9
Do not drop or throw the tool. Dropping or
throwing the tool can result in damage that will
make the tool unusable or unsafe. If the tool has been dropped or thrown,
examine the tool closely for bent, cracked or broken parts and air leaks.
STOP and repair before using or serious injury could occur.
Do not exceed the maximum operating pressure of
the air tool (90 PSI). This can reduce the life of the
tool.
This air tool requires lubrication before the initial
use and before and after each additional use.
j. Do not exceed any pressure rating of any component in the system.
Maximum operating pressure of 90 PSI is measured at the tool inlet
while the tool is running. The pressure drop between the compressor
and tool needs to be compensated for at the compressor.
k. Do not depress trigger when connecting the air supply hose.
l. Never trigger the tool when not applied to a work object. Attachments
must be securely attached. Loose attachments can cause serious injury.
Clean and check all air supply hoses and fittings
before connecting the tool to an air supply. Replace
any damaged or worn hoses or fittings. Tool performance or durability may
be reduced.
Service
a. Tool service must be performed only by qualified repair personnel.
b. When servicing a tool, use only identical replacement parts. Use only
authorized parts.
c. Use only the lubricants supplied with the tool or specified by the
manufacturer.
Do not make any modifications to the tool without
first obtaining written approval from Campbell
Hausfeld. Do not use the tool if any shields or guards are removed or
altered. Do not use the tool as a hammer. Personal injury or tool damage
may occur.
Air Source
a. Never connect to an air source that is capable of exceeding 200 PSI. Over
pressurizing the tool is able to result in bursting, abnormal operation,
breakage of the tool or serious injury to persons. Use only clean, dry,
regulated compressed air at the rated pressure or within the rated
pressure range as marked on the tool. Always verify prior to using the
tool that the air source has been adjusted to the rated air pressure or
within the rated air-pressure range.
b. Never use oxygen, carbon dioxide, combustible gases or any bottled
gas as an air source for the tool. Such gases are capable of explosion and
serious injury to persons.
Do not use any type of reactive gases, including,
but not limited to, oxygen and combustible gases, as
a power source. Use filtered, lubricated, regulated compressed air only. Use
of a reactive gas instead of compressed air may cause the tool to explode
which will cause death or serious personal injury.
OCO2

10
SAFETY INSTRUCTIONS (CONTINUED)
Use only a pressure-regulated compressed air source
to limit the air pressure supplied to the tool. The
regulated pressure must not exceed 90 PSI. If the regulator fails, the pressure
delivered to the tool must not exceed 200 PSI. The tool could explode which
will cause death or serious personal injury.
Safety Glossary
This manual contains information that is very important to know and
understand. This information is provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help recognize this information, observe the
following symbols.
Danger indicates an imminently hazardous situation
which, if not avoided, WILL result in death or serious
injury.
Warning indicates a potentially hazardous situation
which, if not avoided, COULD result in death or
serious injury.
Caution indicates a potentially hazardous situation
which, if not avoided, MAY result in minor or
moderate injury.
Notice indicates important information, that if not
followed, may cause damage to equipment.
IMPORTANT or NOTE: Information that requires special attention.
Safety Symbols
The following Safety Symbols appear throughout this manual to alert you to
important safety hazards and precautions.
SAVE THESE INSTRUCTIONS
DO NOT DISCARD
Wear Eye
and Mask
Protection
Read Manual
First
Risk of
Explosion
Wear Eye
and Hearing
Protection
Risk of Fire
OCO2
Do Not Use
Reactive
Gases
Use only a
pressure-
regulated
compressed air
Warning label
!WARNING
90 PSI

11
GENERAL TROUBLESHOOTING GUIDE
SYMPTOM POSSIBLE CAUSE(S) CORRECTIVE ACTION
Tool runs slowly or
will not operate.
1. Grit or gum in tool. 1. Flush the tool with air tool oil, gum
solvent, or an equal mixture of SAE
10 motor oil and kerosene. If air tool
oil is not used, lubricate the tool
after cleaning.
2. No oil in tool. 2. Lubricate the tool according to
the lubrication instructions in this
manual.
3. Low air pressure. 3a. Adjust the regulator on the tool to a
higher setting (If applicable).
3b. Adjust the compressor regulator to
90 PSI while the tool is running free.
4. Air hose leaks. 4. Tighten and seal hose fittings, if
leaks are found.
5. Pressure drops. 5a. Be sure the hose is the proper size.
Long hoses or tools using large
volumes of air may require a hose
with an I.D. of 1/2 inch or larger
depending on the total length of
the hose.
5b. Do not use a multiple number of
hoses connected together with
quick connect fittings. This causes
additional pressure drops and
reduces the tool power. Directly
connect the hoses together.
Moisture blowing out
of tool.
1. Water in tank. 1. Drain tank. Oil tool and run until no
water is evident. Oil tool again and
run 1–2 seconds.
2. Water in the air lines/hoses. 2a. Install a water separator/filter.
NOTE: Separators only work properly
when the air passing through
the separator is cool. Locate the
separator/filter as far as possible
from the compressor.
2b. Install an air dryer.
2c. Anytime water enters the tool, the
tool should be oiled immediately.
Ratchet mechanism
slips or will not loosen
nut.
1. Ratchet mechanism is dirty. 1. Clean mechanism with air tool oil.

Reminder: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it
for safekeeping.
LIMITED WARRANTY
1. DURATION: From the date of purchase by the original purchaser as follows: Two (2) Years.
2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld, a Marmon/Berkshire Hathaway
Company, 100 Production Drive, Harrison, Ohio, 45030. Visit www.campbellhausfeld.com.
3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of
resale) of the Campbell Hausfeld product.
4. WHAT PRODUCTS ARE COVERED BY THIS WARRANTY: This Campbell Hausfeld air tool.
5. WHAT IS COVERED UNDER THIS WARRANTY: Substantial defects in material and workmanship which
occur within the duration of the warranty period with the exceptions below.
6. WHAT IS NOT COVERED UNDER THIS WARRANTY:
A. Implied warranties, including those of merchantability and FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED FROM THE DATE OF ORIGINAL PURCHASE AS STATED IN THE DURATION.
If this product is used for commercial, industrial or rental purposes, the warranty will apply for
ninety (90) days from the date of purchase. Some States do not allow limitation on how long an
implied warranty lasts, so the above limitations may not apply to you.
B. ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY
RESULT FROM ANY DEFECT, FAILURE, OR MALFUNCTION OF THE CAMPBELL HAUSFELD
PRODUCT. Some States do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
C. Any failure that results from an accident, purchaser’s abuse, neglect or failure to operate
products in accordance with instructions provided in the owner’s manual(s) supplied with
product. Accident, purchaser’s abuse, neglect or failure to operate products in accordance with
instructions shall also include the removal or alteration of any safety devices. If such safety
devices are removed or altered, this warranty is void.
D. Normal adjustments which are explained in the owner’s manual(s) provided with the product.
7. RESPONSIBILITIES OF WARRANTOR UNDER THIS WARRANTY: Repair or replace, at Warrantor’s
option, products or components which are defective, have malfunctioned and/or failed to conform
within the duration of the specific warranty period.
8. RESPONSIBILITIES OF PURCHASER UNDER THIS WARRANTY:
A. Provide dated proof of purchase and maintenance records.
B. Visit www.campbellhausfeld.com to obtain your warranty service options. Freight costs must be
borne by the purchaser.
C. Use reasonable care in the operation and maintenance of the products as described in the
owner’s manual(s).
9. WHEN WARRANTOR WILL PERFORM REPAIR OR REPLACEMENT UNDER THIS WARRANTY: Repair
or replacement will be scheduled and serviced according to the normal work flow at the servicing
location, and depending on the availability of replacement parts.
This Limited Warranty applies in the United States, Canada and Mexico only and gives you specific legal
rights. You may also have other rights which vary from state to state or country to country.
12

Clé à rochet réactionnelle de 3/8 po
Instructions d’Utilisation
Modèle: XT051000
IN745200 6/17
© 2017 Campbell Hausfeld
A Marmon/Berkshire Hathaway Company
FR

ENREGISTREZ VOTRE PRODUIT EN LIGNE MAINTENANT !
www.campbellhausfeld.com/reg
LIRE ET SUIVRE TOUTES LES INSTRUCTIONS
CONSERVER CES INSTRUCTIONS • NE PAS JETER
Lire et conserver ces instructions. Il faut les lire attentivement avant
de commencer à assembler, installer, faire fonctionner ou entretenir
l’appareil décrit.
Pour se protéger et protéger autrui, observer toutes les informations sur
la sécurité. Négliger d’appliquer ces instructions peut causer
des blessures et/ou des dommages matériels! Conserver ces instructions
pour consultation ultérieure.
RAPPEL: Conservez votre preuve d’achat datée aux fins de garantie!
Attachez-le à ce manuel ou classez-le pour le garder en sécurité.
N° de modèle : _____________________________
N° de série : _______________________________
Date d’achat : _____________________________
Pour de l’information sur les pièces,
produits et services veuillez visiter
www.campbellhausfeld.com
Campbell Hausfeld
100 Production Drive
Harrison, Ohio 45030

Fr1
AVANT DE COMMENCER
Description
Si vous avez besoin de la puissance, du contrôle et de la capacité à travailler dans
les espaces confinés, cette clé à rochet est celle dont vous avez besoin. La fonction
réactionnelle élimine la pression sur les jointures grâce à l’embrayage interne qui
absorbe l’impact au lieu de le transférer à votre main/poignet. Dans le but de vous
prouver que nous comprenons vos exigences en matière de travail, le mécanisme de
détente est conçu pour étendre votre portée et s’activer dans les espaces confinés.
CampbellHausfeld®vous facilite le travail afin de terminer vos projets en pro.
L’histoire de l’entreprise est parsemée de produits de qualités depuis 1836,
alors que furent fabriqués les wagons tirés par les chevaux et les équipements
agraires. Aujourd’hui, Campbell Hausfeld offre une gamme complète de
compresseurs, outils et d’accessoires pneumatiques, pompes de gonflage,
de cloueurs, agrafeuses, pistolets pulvérisateurs, laveuses à pression, et plus.
Terminez vos projets plus rapidement et plus facilement grâce à Campbell
Hausfeld – l’expert de la puissance de l’air.
DÉBALLAGE
Dès que l’appareil est déballé, l’inspecter attentivement pour tout signe
de dommages en transit. Vérifier s’il y a des pièces desserrées, manquantes
ou endommagées. Vérifier pour s’assurer que tous les accessoires fournis
sont inclus avec l’appareil. Pour toutes questions, pièces endommagées ou
manquantes, veuillez visiter www.campbellhausfeld.com pour l’assistance à la
clientèle.
Ne pas utiliser un modèle qui a été endommagé
pendant le transport, la manipulation ou l’utilisation.
Le dommage peut résulter en explosion et peut causer des blessures ou
dégâts matériels.
Autres pièces (non fournies)
Il vous faudra les éléments et/ou accessoires suivants pour correctement
mettre en marche et utiliser de manière optimale votre clé à rochet
réactionnelle GSD de 9,5 mm (3/8 po) :
• Connecteur 6,4 mm (1/4 po) NTP (M)
o Pour une réduction du stress pour vous et votre tuyau, essayez un
connecteur flexible.
• Tuyau à air 9,5 mm (3/8 po) (DIA. INT.)
• Raccord 6,4 mm (1/4 po) NPT (F)
o Élimine la confusion par l’utilisation d’un raccord de style universel.
o Les coupleurs à attache rapide raccordent rapidement et facilement
les tuyaux aux outils.
o Si vous n’utilisez pas un connecteur flexible, un raccord pivotant
pourrait être utilisé afin d’éviter l’entortillement et réduire le stress
imposé à votre tuyau d’air.
• Compresseur d’air 15,14L (4gal) ou plus.
• Douilles à chocs
• Ruban PTFE pour tous les joints des raccords
• Clé ajustable pour serrer les joints des raccords
• Pistolet graisseur à injection pour la lubrification de l’équipement
Voir au www.campbellhausfeld.com pour d’autres informations sur les
accessoires accompagnant vos outils et votre système pneumatique.

Fr2
MEILLEURES PRATIQUES
u Pour une meilleure puissance, maintenez la pression à l’outil de 621 kPa.
u Plus votre tuyau à air est long, plus la pression diminuera entre le compresseur et
l’outil. Si vous utilisez un tuyau à air dépassant 15,2m (50 pi), on devrait plutôt
utiliser un tuyau à air de 12,7 mm (1/2 po) de dia. int. pour assurer une pression
appropriée à l’outil.
u À défaut de lubrifier et de correctement entretenir vos outils pneumatiques diminuera
drastiquement leur durée de vie. Utilisez de l’huile chaque fois que vous utilisez votre
outil pour le lubrifier, le nettoyer et éviter la rouille, en une seule étape. Campbell
Hausfeld offre une huile à outils pneumatiques sous le numéro de pièceST1270.
CARACTÉRISTIQUES TECHNIQUES
XT051000
kPa maximum 621
pi³/min (l/min) en charge de service à 100% 53,8 l/min @ 621 kPa
pi³/min (l/min) sans charge de service à 100% 96,3
pi³/min standard (l/min) en charge de service à 100% 404,9 l/min @ 621 kPa
pi³/min standard (l/min) sans charge de service à 100% 696,6
Recommandation pour le compresseur d’air 15,14 L
Couple maximal 10,37 kg m
Couple résistant 0 - 6,92 kg m
Classification RPM (vitesse à vide) 320
Vitesse d’impact (IPM) 1,600
Contrôle de la vitesse Détente
Changement de direction
Vers l’arrière 1
Vers l’avant 1
Type d’engrenage Goupille d’embrayage
Capacité de boulonnage 9,5 mm (3/8 po)
Arrivée d’air 6,4 (1/4 po) NPT (F)
Taille minimum du tuyau 9,5 mm (3/8 po)
Enclume 9,5 mm (3/8 po)
Matériau du logement Composite
Poids de l’outil 1,27 kg
Longueur du tuyau 28,58 cm (11-1/4 po)
Largeur du tuyau 5,72 cm
Hauteur de l’outil 4,76 cm

Fr3
APPRENEZ À CONNAÎTRE VOTRE UNITÉ
INSTRUCTIONS DE MISE EN MARCHE
MEILLEURES PRATIQUES
u Le compresseur d’air utilisé avec votre clé à rochet réactionnelle doit être capable
de maintenir au moins 621 psi lorsque l’outil est en fonction. Un approvisionnement
d’air inadéquat peut causer une perte de puissance et une performance inconstante
de l’outil.
u Un régulateur de pression – utilisé sur l’outil – est utile pour contrôler la pression
de fonctionnement de l’outil et maintenir 621 kPa.
u Utilisez un huileur pour offrir une circulation de l’huile dans l’outil et un filtre pour
retirer les impuretés liquides et solides pouvant causer la rouille ou de l’encrassage.
u Pour débrancher un raccord/embout d’un système: poussez le raccord et l'embout
ensemble avant de tirer le manchon du raccord vers l’arrière et en séparant le
coupleur et l'embout.
u N’utilisez que des douilles spécifiquement classifiées comme des douilles à chocs.
Si des douilles ordinaires étaient utilisées avec des outils pneumatiques, elles
pourraient se fissurer et causer de graves blessures corporelles.
* Les éléments montrés aux Instructions de mise en marche ne sont pas inclus avec cet outil.
Arrivée d’air
Sortie de
l’échappement
Enclume
Détente
Bouton de marche avant/arrière
Raccord de graissage de type encastrable
Bouchon
Raccord
Rapide
Tuyau à Air

Fr4
LUBRIFICATION
Moteur:
Pour protéger votre outil, lubrifiez le moteur chaque fois –avant et après–
l’avoir utilisé. Vous ne pouvez huiler le moteur trop fréquemment ou placer
trop d’huile dans l’arrivée d’air.
1. Débranchez la clé à rochet réactionnelle de l’alimentation d’air.
2. Tournez l’outil à l’envers.
3. En tirant sur la détente, versez environ une cuillerée à thé d’huile à
outils pneumatiques dans l’arrivée d’air. Campbell Hausfeld offre une
huile à outils pneumatiques sous le numéro de modèleST1270.
4. Connectez l’outil à l’alimentation d’air et couvrez la sortie de
l’échappement avec une serviette. Mettez la clé à rochet réactionnelle
en marche pendant 10 secondes. L’huile sera pulvérisée par la sortie de
l’échappement lorsque l’outil sera mis en marche.
5. Continuez tant qu’il y aura de l’huile.
6. Essuyez toute huile résiduelle de l’outil avant de l’utiliser.
Engrenages :
Une lubrification régulière de mécanisme d’impact
via le raccord de graissage de type encastrable fera
augmenter la durée de vie de votre clé à rochet.
Sous des conditions d’utilisation normales, injectez
une petite quantité de graisse sur le raccord de
graissage de type encastrable avec un pistolet
graisseur à injection, environ une fois par semaine.
MODE D’EMPLOI
Pour enlever un écrou, un boulon ou
une bougie :
1. Placez la tête de la clé à chocs afin qu’elle
fonctionne en sens inverse en enfonçant le
bouton de marche avant/arrière et en le tournant
dans les sens des aiguilles d’une montre pour
enlever le boulon, l’écrou ou la bougie.
2. Attachez la douille à CHOCS de la taille
appropriée sur l’enclume et appuyez
fermement jusqu’à ce que la douille repose sur la retenue de la bille.
3. Placez la douille sur l’écrou ou le boulon et actionnez la détente jusqu’à
ce que l’écrou ou le boulon ait été retiré ou installé.
Pour installer un écrou, un boulon ou une bougie :
Suivez les directives ci-dessus MAIS placez la tête de la clé à chocs afin qu’elle
fonctionne vers l’avant en enfonçant le bouton de marche avant/arrière et en le
tournant dans les sens contraire des aiguilles d’une montre vers la position avant.
Ne pas trop serrer lorsque vous utilisez votre clé à chocs pneumatique. Utilisez
une clé dynamométrique pour atteindre manuellement le couple approprié.