Camtree C-G-10 User manual

G r i pp e r C a r Su c t i on M o u n t
C - G - 1 0
I N S TR UC T I O N M A NUA L
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied
by the applicable copyright statutes or in wring by the publisher.

CAMTREE Gripper G-10 Car Sucon Mount 2
I NT RO DUC TIO N
Our CAMTREE Gripper G-10 Car Sucon Mount is a custom designed producon tool that
allows shooters to mount their DV/DSLR/Mirror Less cameras on most at surfaces where
handheld and xed mount conguraons are not possible. Using strong Industrial sucon
cups for posive load-bearing contact for cameras up to 6kgs, the Sucon Mount adds the
“Wow” factor to producon value most evident in running footage on land, sea and air.
IN THE BO X
Please inspect the contents of your shipped package to
ensure you have received all that is pictured and listed
below.
A S S EMB L I N G Y O U R G r i p p e r G - 1 0 C a r S u c t i o n Mo u n t
Suction Cup Gripper
3 x 450mm Rods
Storage Case
Suction Cup Dust Cover
3 x Mounting Clamp With Pouch
4 x 300mm Rods
3 x 110mm Rods
6 x Universal Joint Clamp
Grey Plate with
Febric Cloth
Cup Adapter
Camera Platform with
3 x 110mm Rods Safety Cable
6 x Hex Knob
Locking Adapter

CAMTREE Gripper G-10 Car Sucon Mount 3
Loosen the knob from joint clamp and aach it to 110mm rod.
Select a surface posion for your
sucon cup and lock it with the
lever on it.
Now loosen the knob on sucon cup, then aach 110mm rod to it and reghten with same
knob.
Then insert 450mm aluminum rod to joint clamp and tighten properly. Repeat this process
for next 2 suction cups.
Note: If you want to set up on a shorter length, then you can use 300mm aluminum Rods.

CAMTREE Gripper G-10 Car Sucon Mount 4
Attach joint clamp to Camera Platform with 3 x 110mm Rods. Using same approach,
attach other joint clamps to camera platform tighten the knobs. Then attach 450mm rod
setups to it.
Now mount your camera onto it
and secure it with locking adapter.
A PROPER SET UP AND ATTACHED
CAMTREE GRIPPER G-10 SHOULD
LOOK LIKE THIS IMAGE.
CAMERA NOT INCLUDED IN PACKAGE.
Note - You can also assemble your
Camtree G-10 Gripper by using Cup
Adapter.

CAMTREE Gripper G-10 Car Sucon Mount 5
Note - You can also assemble your Gripper G-10 by using mounng clamp. The clamp allows the
gripper to be mounted to any square corner or rounded edge surface. Please Use following
sequence of pictures and text as your assembly guide.
Aach mounng clamp to your car
door and ghten properly.
Now remove one 450mm rod setup from joint clamp, then insert mounting clamp rod to
joint clamp and tighten the knob to secure. Mount your camera onto it and secure with
locking adapter.

Note - Fabric cloth gives the metal plate a non-slip and stable base. Keep this fabric cloth on any
stable platform, for instance, the hard case, as shown in the images, and then you can show the
metal plate setup on it.
Put the fabric cloth on the hard case, as shown in the images.

Insert the screws from the bottom of the plate into the threads and mount the camera
platform on top.
•Securely tighten the screws with the help of
4mm Allen Key.
Image showing the camera platform with
3x110mm rods secured adequately to the
metal plate.
6
CAMTREE Gripper G-10 Car Sucon Mount

Loosen the screw out of the locking adapter, insert it into the bottom thread of the 100mm
flat fluid head and tighten it.
Mount the 100mm flat fluid head on the camera platform and adequately secure the screw
from the bottom using the locking adapter.
Once the fluid head is secured, mount your camera on it. Finally, your setup is ready for use.
7
CAMTREE Gripper G-10 Car Sucon Mount

YOUR CAMTREE GRIPPER G-10 CAR SUCTION MOUNT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
8