Camtree G-51 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Gripper Campod Sucon Car Mount (G-51)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
A s s e m b l y M a n u a l
Camera Mount
Hub
3 x 3’’ Extension
Rods 6 x 6” Extension
Rods
6 x Ball Tilt Heads
Complimentary Dust
Cover
3 x Gripper Sucon Cups
2 x Ratchet/
Safety Wires
3 x Shanks for
Gripper Cups
2 x Round
Hooks
2 x C Hooks
5 x Knob
2 x Bolts
2 x Allen Key 2 x Washer
Bag Packing

2
Gripper Setup
Note: While fing your G-51 and choosing which holes to use in the hub, keep in mind the relaonship
between the surface you are using to mount G-51 and the posion of camera. This will help you to choose
correct hub holes.
 Take Camera Mount Hub screw either 3” or
6” extension rod into one of the central
holes. As shown in the image.
 Now insert Ball Tilt Head into the rod and
ghten to secure properly. Then screw-in
another length of rod into ball lt head.
 Add the second set of Ball Tilt Heads to tri
pod legs and ghten to properly secure
them. Insert the shanks onto ball lt heads
and ght it properly.
 Remove the complimentary dust cover and
place your rst sucon cup on the selected
posion from where you want to shoot. Lock
the sucon cup with lever on it. Repeat this
process for all sucon cups.
Note: Make sure to ghten all connecons to avoid accidental loss of camera and rig.
Note: To guarantee proper adhesion of sucon cups, check that the surfaces of both, sucon cup and
mounng surface are clean & dry. Please mount the device on smooth, even and non-porous surfaces.
 Adjust the distance of tripod legs by adding
dierent length of extension rods, as re-
quired, to reach mounng surface.

3
 Insert the knob into sucon cup. Then, add
the set of Ball Tilt Heads to sucon cups.
 Aach both the round hooks with camera
hub. Insert one end of both safety wires into
round hooks.
 Now aach both the C-Hooks with your
clamping surface. Then, insert the other end
of both safety wires into each C-Hook.
 Aer insert the knob into sucon cup then
ght it properly to secure them. As shown in
the image.
NOTE: Although G-51 Gripper’s holding force is adequate for regular driving shots, safety wires must be
used for addional security. When mounted on cars, the objects aached to the Gripper (e.g. camera, etc.)
have to be secured addionally and also to avoid vibraons, especially on thin metal sheets.
 Finally, using any of the 1/4”-20 or 3/8’’-16
screws located in the center of camera hub,
aach your professional camera to the grip-
per.
NOTE: The design and construcon of this rig supports cameras up to 10kg/ 22lb (at running posion) &
20kg/ 44lb (at stac posion), and is meant for use when traveling at a maximum speed of 40 km/hr. Do
not exceed these specificaons.
 Then insert the bolt below of camera mount
hub. Mount your camera onto camera mount
hub and secure it carefully by ghtening the
knob using Allen key if required.

4
YOUR CAMTREE GRIPPER CAMPOD SUCTION CAR MOUNT
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.